Munson Machinery Company, Inc.

Rotary Batch Mixer blends, heats, cools, and adds liquids.
Electronic Components & Devices

Rotary Batch Mixer blends, heats, cools, and adds liquids.

Model MX-1-SSJ features internal spray line for liquid additions, discharge chute to direct flow of discharged materials, and insulated/jacketed mixing drum that can be piped to oil, steam, or chiller system. With 1 cu ft capacity, it can distribute micro ingredients with 100% uniformity regardless of disparities in bulk densities, particle sizes, or flow characteristics of batch ingredients....

Read More »
Batch Mixer dries/dehumidifies/cools bulk solid materials.
Electronic Components & Devices

Batch Mixer dries/dehumidifies/cools bulk solid materials.

With all-stainless contact surfaces and suitable for 3-A and USDA applications, Rotary Batch Dryer-Dehumidifier-Cooler uses diagonal, vertical tumbling and spilling motion to optimize particle exposure. This, along with lifters inside drum, minimizes material degradation and promotes process efficiency. Lifters also serve to direct material into discharge spout for 100% evacuation. Ingredients...

Read More »
Rotary De-Clumper has sanitary, low-profile design.
Machinery & Machining Tools

Rotary De-Clumper has sanitary, low-profile design.

At 11 in. high, model 15X15-SS reduces agglomerates and friable materials being discharged from process equipment, storage vessels, and shipping containers. Material entering 15 in.Â-² inlet is reduced by dual rotors with 3-point, single-piece, stainless steel breaking heads rotating inside curved, perforated bedscreen. On-size material exits through apertures in bedscreen from...

Read More »
Continuous Rotary Mixer features 316 SS sanitary design.
Electronic Components & Devices

Continuous Rotary Mixer features 316 SS sanitary design.

Designed to blend ingredients in ratios as extreme as 1 ppm with 100% uniformity, Model 16-4SS features capacity range of 85 cu-ft/hr at 1 min residence time to 42 cu-ft/hr at 2 min residence time. Slowly rotating 16 in. x 4 ft cylinder contains mixing flights that impart forward- and reverse-pitch, back flow mixing action that distributes bulk ingredients thoroughly and gently. Drum angle can be...

Read More »
Electronic Components & Devices

Miniature Rotary Batch Mixer has 5 ft³/500 lb capacity.

Model MX-5-SS blends ingredients in ratios as extreme as 1 ppm with 100% uniformity in less than 3 min, regardless of disparities in bulk densities, particle sizes, or flow characteristics of batch components. Rotating drum with proprietary mixing flights gently tumbles, turns, and folds material. For complete evacuation with no residual material, rotating vessel and internal flights lift and...

Read More »
Rotary Batch Mixer creates uniform blends in under 3 min.
Electronic Components & Devices

Rotary Batch Mixer creates uniform blends in under 3 min.

Sanitary Model 700-TH-40-SS blends batches of ingredients in parts as small as one per million with 100% uniformity, regardless of disparities in bulk densities, particle sizes, or flow characteristics. Along with retractable inlet and stationary discharge, machine incorporates rotating drum with proprietary mixing flights that gently tumble, turn, and fold material. It evacuates 100% of batch,...

Read More »
Laboratory and Research Supplies and Equipment

Centrifugal Impact Mill finely grinds pharmaceuticals.

Able to handle wet or dry materials, 24 in. sanitary stainless steel Model CIM-24-SS grinds bulk pharmaceuticals and nutraceuticals into controlled particle sizes down to 325 mesh. Materials travel from center to periphery of discs, passing through 5 intermeshing rows of rotating and stationary pins. Desired tight particle size distribution is obtained by controlling rotor speed, which is...

Read More »
Hammer Mill reduces friable and fibrous materials.
Laboratory and Research Supplies and Equipment

Hammer Mill reduces friable and fibrous materials.

Utilizing centrifugal force, Model 141 reduces materials into uniform particle sizes from 20-300 mesh. Shaft, integral hammer discs, disc pins, and hammers are driven by 75 hp motor at 1,800-4,000 rpm, achieving hammer tip speeds from 8,700-19,500 fpm. Particle size is determined by size of screen perforations. In addition to lower 180° cylinder screen, unit features 90° screen...

Read More »
Shredder handles highly abrasive materials.
Waste Management & Waste Handling Equipment

Shredder handles highly abrasive materials.

Maxum 30 employs two 14 in. dia, counter-rotating shafts that operate at 25-35 rpm to grind up to 2 x 2 x 6 ft, 1,600 lb blocks of material into uniform particles from 1/32-1Â-½ in. as determined by diameter of bed screen perforations. Each of its 2 rotors is configured with staggered array of treated, solid carbide, conical tips that have interference fit into receiver slots for rapid...

Read More »

All Topics