Allied Machine & Engineering Corp.
Dover, OH 44622
New T-A Pro Insert Comes with Both Imperial and Metric Shanks, with Flat and Cylindrical Variants
Available in diameters ranging from 0.4370 in. – 1.882 in. (11.1mm. – 47.80mm.) and is ideal for holes ranging in stub, 3xD, 5xD, 7xD, 10xD, 12xD, and 15xD depths. Suitable for machine shops and high production manufacturers with incredible speed and cost per hole averaging 25% less than existing drills. Incorporates straight flutes redesigned for maximum coolant flow and excellent rigidity.
Read More »
New GEN3SYS XT Pro High-Penetration Insert Reduces Changeover and Increases Throughput
Can withstand the extreme heat produced while drilling in structural steel beams or plates in high production facilities. Designed to run effectively in structural steel holders, improving chip formation while reducing vibrations to create a higher quality hole. Comes with proprietary blend of substrate and multilayer AM420 coating and is ideal for structural steel applications.
Read More »
New Wohlhaupter Boring Systems for Hole Roughing and Finishing Applications
Wohlhaupter boring systems include new vibration dampened intermediate modules, NOVITECH, as well as Vario-Bore, Alu-Line and Combi-Line. 4TEX is ideal for applications that include shallow 2xD, 3xD, and 4xD holes in the 0.472” – 1.850” range. Solid carbide drills are available in wide diameter range of 3mm to 20mm.
Read More »
New 4TEX IC Drill Includes Four-sided Carbide Insert Geometries for Wear Resistance
Flute space of the internal cutting edge side is 1.6 times larger for improved chip removal. Two twisted coolant outlets with the additional flute space, increase penetration rates by improving coolant flow and generating superior chip evacuation. Distinctive shape improves surface finish, hole quality, and penetration rates while eliminating issues from chips winding around the tool.
Read More »
New Wohlhaupter Boring Systems for Hole Roughing and Finishing Applications
NOVITECH vibration dampened intermediate modules reduce chatter in extended-reach boring operations and increases boring operations’ productivity, surface quality and process reliability. 4TEX IC drill is ideal for applications that include shallow 2xD, 3xD, and 4xD holes in the 0.472 - 1.850 in. (12m - 47mm) range. Superion solid carbide drills are available in diameter range of 3 - 20mm and...
Read More »
New 4TEX Indexable Carbide Insert Drills Comes with Dual Twisted Coolant Outlets
Designed for making shallow 2xD, 3xD, and 4xD holes in the 12 mm – 47 mm range. The inserts are offered in geometry/coating combinations for all ISO materials such as steel, stainless steel, high temperature alloys, non-ferrous and iron. Stocked in both metric and imperial shanks with fractional diameters.
Read More »
Allied Machine Exhibits Robust Cutting Tools for Oil and Gas Industry at HOUSTEX 2019
Featured tooling meets rigorous demands of machining difficult energy components. Houston, TX - At HOUSTEX 2019, Allied Machine & Engineering presents three holemaking & finishing solutions for manufacturers of oil and gas field components in booth #2034. Machining parts for this rugged industry offers significant challenges such as variation in chip formation, long cross holes, interrupted cuts...
Read More »New at IMTS this year from Allied Machine & Engineering Corp.
Allied Machine & Engineering Corp. (AMEC), the leading manufacturer of replaceable tip drilling systems, is pleased to announce the next level of hole making technology for the metal cutting industry. GEN3SYS(TM), AMEC's newest, and most advanced drilling system, will be showcased and demonstrated at IMTS, September 6-13, 2006. Among the various upgrades, GEN3SYS(TM) offers a patent pending...
Read More »
Grinding Wheels have vitrified bond structure.
Designed to work on tough metals and non-ferrous materials, Vitrified Super Abrasive Grinding Wheels include vitrified bonded CBN, PCD/PCBN, and diamond grinding wheel configurations. Tailored grinding wheels can be matched to unique specifications.
Read More »
New T-A Pro Insert Comes with Both Imperial and Metric Shanks, with Flat and Cylindrical Variants
Available in diameters ranging from 0.4370 in. – 1.882 in. (11.1mm. – 47.80mm.) and is ideal for holes ranging in stub, 3xD, 5xD, 7xD, 10xD, 12xD, and 15xD depths. Suitable for machine shops and high production manufacturers with incredible speed and cost per hole averaging 25% less than existing drills. Incorporates straight flutes redesigned for maximum coolant flow and excellent rigidity.
Read More »
New GEN3SYS XT Pro High-Penetration Insert Reduces Changeover and Increases Throughput
Can withstand the extreme heat produced while drilling in structural steel beams or plates in high production facilities. Designed to run effectively in structural steel holders, improving chip formation while reducing vibrations to create a higher quality hole. Comes with proprietary blend of substrate and multilayer AM420 coating and is ideal for structural steel applications.
Read More »
New Wohlhaupter Boring Systems for Hole Roughing and Finishing Applications
Wohlhaupter boring systems include new vibration dampened intermediate modules, NOVITECH, as well as Vario-Bore, Alu-Line and Combi-Line. 4TEX is ideal for applications that include shallow 2xD, 3xD, and 4xD holes in the 0.472” – 1.850” range. Solid carbide drills are available in wide diameter range of 3mm to 20mm.
Read More »
New 4TEX IC Drill Includes Four-sided Carbide Insert Geometries for Wear Resistance
Flute space of the internal cutting edge side is 1.6 times larger for improved chip removal. Two twisted coolant outlets with the additional flute space, increase penetration rates by improving coolant flow and generating superior chip evacuation. Distinctive shape improves surface finish, hole quality, and penetration rates while eliminating issues from chips winding around the tool.
Read More »
New Wohlhaupter Boring Systems for Hole Roughing and Finishing Applications
NOVITECH vibration dampened intermediate modules reduce chatter in extended-reach boring operations and increases boring operations’ productivity, surface quality and process reliability. 4TEX IC drill is ideal for applications that include shallow 2xD, 3xD, and 4xD holes in the 0.472 - 1.850 in. (12m - 47mm) range. Superion solid carbide drills are available in diameter range of 3 - 20mm and...
Read More »Allied Machine Launches Newest App â Machinist Tool
Smart manufacturing and modern machinists demand quick access to vital information. Allied Machine delivers with a customized app for machining holes. Dover, OH: (June 20, 2019) Allied Machine & Engineering, a leading manufacturer of holemaking and finishing cutting tool systems headquartered in Dover, Ohio, releases their most recent mobile app, Machinist Tool, available for download now at both...
Read More »Allied Machine Unveils The Solution Hub App
Hold Allied’s most essential holemaking resources in the palm of your hand with this fresh-faced, user-friendly app. Dover, OH: (August 29, 2019) Allied Machine & Engineering, a global manufacturer of holemaking and finishing cutting tools, releases their free mobile app, Solution Hub, available now for download on both the Apple Store and Google Play. The app is a fresh-faced expansion of the...
Read More »
New 4TEX Indexable Carbide Insert Drills Comes with Dual Twisted Coolant Outlets
Designed for making shallow 2xD, 3xD, and 4xD holes in the 12 mm – 47 mm range. The inserts are offered in geometry/coating combinations for all ISO materials such as steel, stainless steel, high temperature alloys, non-ferrous and iron. Stocked in both metric and imperial shanks with fractional diameters.
Read More »
Allied Machine Exhibits Robust Cutting Tools for Oil and Gas Industry at HOUSTEX 2019
Featured tooling meets rigorous demands of machining difficult energy components. Houston, TX - At HOUSTEX 2019, Allied Machine & Engineering presents three holemaking & finishing solutions for manufacturers of oil and gas field components in booth #2034. Machining parts for this rugged industry offers significant challenges such as variation in chip formation, long cross holes, interrupted cuts...
Read More »Allied Machine & Engineering Corp. (AMEC) to exhibit at WESTEC 2008.
When attending Westec this March 31- April 03, please plan to stop by the AMEC booth, #3850, in the South Hall. Allied Machine will once again be displaying and demonstrating the latest, and greatest, metal cutting tooling available to the industry. Leading the way is the recently expanded offering, GEN3SYSÃ-® High Penetration Drilling System. The increased range for this remarkable tool is...
Read More »