Gowanda Electronics Corp.
Gowanda, NY 14070
Share:
Surface Mount Inductors have 1.0-100 -µH inductance range.
Rated for currents from 205-1,384 mAdc and housed in 0.070 x 0.120 x 0.130 in. footprint, SMP1210S series inductors are designed for use in power applications, including filters for DC/DC converters and switching regulated power supplies. Saturation current is from 200-2,060 mAdc and coupling is less than 4% with 1 mm of spacing between components. Operating at temperatures of -55 to +125Ã-
Read More »Power Inductors feature military-approved design.
Added to military's DSCC Qualified Products List, MLP5025 Series is qualified to MIL-PRF-27/367A, while MLP1812 Series meets MIL-PRF-27/368A, and MLP8527 Series meets MIL-PRF-27/370A. Series MLP5025 features inductance range of 0.22-22,000 Ã-µH, 7.00-.050 A current rating, and max DCR of .0080-160 W, while Series MLP1812 features 1.0-330 Ã-µH, 1.050-.090 A, and .113-15.240 W, and Series...
Read More »Inductor Series features non-magnetic design.
Suited for medical industry and other applications where magnetic materials and characteristics must be avoided, MG inductor series act as filter to block certain frequencies that could compromise device performance. Through-hole leaded and surface mount versions, along with RoHS-compliant version, are available. Products are offered with 0.01-4.7 Ã-µH inductance options, 260-3,835 mA dc...
Read More »RF Inductors provide COTS alternative to Mil Spec products.
Ranging from 0.12-27 Ã-µH, Series SMRF 1010 targets RF applications requiring wire bond or surface mount inductors with wrap around gold-plated termination on ceramic base. Units feature current ratings from 880-120 mAdc based on 35Ã-
Read More »Surface Mount RF Chokes target lighting industry.
Series HL 8527 can handle high voltage spikes associated with starter circuits and electronic ballasts within lighting industry. With current ratings from 67-50 mAdc, units feature inductance from 16,000-55,000 Ã-µH at 79 kHz. Additional applications include RF signal circuitry in communications equipment, medical diagnostic equipment, and industrial process control equipment.
Read More »Toroidal Inductors suit power applications.
Thru-hole Series 083AT features inductance from 10-100 Ã-µH and current ratings up to 30 Adc. High current/power capacity units are targeted for use in power supply filtering and energy storage applications. Specific applications include medical diagnostic, monitoring and analysis equipment, electrical/electronic test and measurement equipment, and commercial and industrial control systems.
Read More »Shielded Inductors allow closer mounting on circuit board.
Suited for use in RF applications, SMRF 5025S surface mount inductors have semiconductor grade molding material and high temperature solder on internal connection. Electromagnetic shielding is accomplished by placing one sleeve of magnetic material directly over coil winding; process provides shielding with less than 2% coupling. Characteristics include inductance from .10-10,000 Ã-µH and...
Read More »RF Inductors have ferrite core.
CF1008 series surface mount inductors are for use in RF applications including wireless and portable test & measurement equipment, communications, medical diagnostic, and industrial process control equipment. Wire-wound inductors have ferrite core in place of ceramic and terminations that offer improved solderability. Device has inductance values from 0.10-100 mH and DC max current ratings from...
Read More »Surface Mount RF Inductors offer shielding.
Series SMRF 1812S features inductance from .10 Ã-
Read More »Surface-Mount Inductors handle high-current applications.
Series SMP 5057 offers inductance range from 3.9 Ã-
Read More »Gowanda Announces Expansion of its DYCO Electronics Facility
10 November 2020, Gowanda, NY (USA) – Gowanda Components Group is pleased to announce the completion of a nearly 50% expansion at its DYCO Electronics facility in Hornell, New York. The 12,000 sq. ft. expansion will help the company address market demand for its products, enhance work flow and improve operational efficiency. “We manufacture custom components and assemblies for the rail...
Read More »TTI Now Stocking Gowanda Inductors for RF, Microwave & Power Applications
6 Aug 2020, Gowanda, New York (USA) – Gowanda Electronics, a designer and manufacturer of high performance electronic components for demanding applications, announces it has signed a distribution agreement with TTI, Inc. (Fort Worth, Texas), a leading specialty distributor of electronic components. TTI is now an authorized North American distributor of Gowanda’s inductors and chokes designed...
Read More »Gowanda Expands Passive Offerings with Acquisition of RCD Components
2 December 2019, Gowanda, NY (USA) – Gowanda Components Group is pleased to announce the acquisition of RCD Components, headquartered in Manchester, New Hampshire. RCD is a manufacturer of passive components – including resistors, capacitors, coils and delay lines – for the commercial, military and aerospace industries. This is the ninth acquisition for GCG within the last seven years....
Read More »Gowanda Expands Capabilities with Addition of REM-tronics
24 April 2019, Gowanda, NY (USA) – Gowanda Components Group is pleased to announce the merging of REM-tronics, Inc. with the GCG family. REM-tronics is a contract manufacturer of high-reliability products for the aerospace, industrial, medical and military industries. They are located in Dunkirk, New York. “The merging of REM-tronics with GCG will further enhance our capability to design and...
Read More »Gowanda Expands Magnetics Offerings with Acquisition of HiSonic
22 May 2018, Gowanda, NY (USA) – Gowanda Components Group is pleased to announce that its offerings of RF and microwave passive magnetic components are expanding in connection with the acquisition of HiSonic in Olathe, Kansas. “HiSonic’s designs, technologies and customers complement those within our Magnetics Division” said GCG CEO Don McElheny. “The synergy in our capabilities and...
Read More »Gowanda Expands Inductor Capabilities with the Acquisition of Butler Winding
27 July 2016, Gowanda, NY (USA) - Gowanda Electronics, a business unit of Gowanda Components Group (GCG), is pleased to announce that its capabilities for the design and manufacture of inductors and other passive components are expanding in connection with its parent company’s acquisition of Butler Winding in Butler, PA. GCG CEO Don McElheny stated, “Butler’s products and capabilities...
Read More »Gowanda and Instec Join Forces to Grow Passive Component Business
Products Featured at International Microwave Symposium (IMS 2012) (Gowanda, NY, USA) - Gowanda Electronics, a US-based designer and manufacturer of precision electronic components and inductors for power, radio frequency (RF), and high frequency (HF) applications, is teaming up with its newly acquired sister company, Instec Filters, to provide a broader range of passive electronic components to...
Read More »Gowanda Electronics Positions Itself for Growth in Electronic Components
25 July 2011 (Gowanda, NY, USA) - Gowanda Electronics, a designer and manufacturer of precision electronic components for RF and power applications, recently completed a recapitalization of the company with Addison Capital Partners. The new structure will enable Gowanda to accelerate its plans for growth in strategically important products and markets. David Schaack, Gowanda's CEO said, We are...
Read More »Surface Mount Inductors have 1.0-100 -µH inductance range.
Rated for currents from 205-1,384 mAdc and housed in 0.070 x 0.120 x 0.130 in. footprint, SMP1210S series inductors are designed for use in power applications, including filters for DC/DC converters and switching regulated power supplies. Saturation current is from 200-2,060 mAdc and coupling is less than 4% with 1 mm of spacing between components. Operating at temperatures of -55 to +125Ã-
Read More »Power Inductors feature military-approved design.
Added to military's DSCC Qualified Products List, MLP5025 Series is qualified to MIL-PRF-27/367A, while MLP1812 Series meets MIL-PRF-27/368A, and MLP8527 Series meets MIL-PRF-27/370A. Series MLP5025 features inductance range of 0.22-22,000 Ã-µH, 7.00-.050 A current rating, and max DCR of .0080-160 W, while Series MLP1812 features 1.0-330 Ã-µH, 1.050-.090 A, and .113-15.240 W, and Series...
Read More »