EDL, Inc.
Danville, VA 24540
Pocket-Sized Digital Pyrometer operates in sub-zero temperatures.
Able to operate in outside temperatures as low as -30°C, Pocket-Probe Extended Range Pyrometer is designed for such industries as utilities and gas. Lexan window is available for use in food and pharmaceutical industries, and thermocouple support covers types K, J, T,Â- and E. Also available, Options Package includes Peak Hold Memory and Peak Hold Reset functions as well as magnetic...
Read More »
Probe Pyrometer Kit targets tire and rubber industries.
Providing instantaneous readings in 5° increments, KIT-EZK-CR E-Z Probe Pyrometer Kit includes LCD with backlight, input jacks on top and bottom, belt clip and sensor holder for access and storage, and ability to switch between °F and °C. Also included is Reinforced Fine Hypodermic Sharp Needle sensor specifically for tire and rubber industry, and both low battery and open...
Read More »
Portable Temperature Calibrator suits on-site calibration.
Designed for use with immersion or insertion sensors, T-VALH enables on-site calibrations to be performed on hard to reach sensors without removal or disconnection of sensor cables and harnesses. All hot zone components are constructed from 304 stainless steel, while control unit is in watertight O-Ring sealed case with 6 ft long connecting lead. Hot zone accommodates 0.250 in. dia sensors and...
Read More »
Mini Salt Bath weighs only 50 lb once fully loaded.
With fluid immersion depth of over 9 in., MSB-500 is suited for benchtop comparison calibrations of SPRTs and thermocouples from 180-500°C. It achieves 10 mK stabilities and uniformity using less than 14 lb of salt, and features built in RS-232 communication, and touch screen interface pre-programmed with standard calibration points for simple one-touch settings. Safety features include...
Read More »Temperature Meter provides 0.1° C accuracy.
Hand held, microprocessor-based Model LT-100 uses 24-bit A/D to generate precise temperature readings. It inputs all ASTM referenced thermocouples, K, N, J, E, T, R, S, B, C, and ±160.0000 mV dc A. Cold end reference junction is incorporated to accurately compensate for changes in ambient temperatures. When highest accuracy is required, internal electronic cold end reference can be set to...
Read More »
Surface Sensors measure temp of moving conveyor belts.
Available in variety of sizes and styles, Roller Contact Sensors feature glass-filled nylon block that can withstand temperatures up to 815°C. Protected thermocouple enables use on drums, rollers, pipes, hoses, tanks, tubes, and objects with surface speed up to 10 fps.
Read More »
Portable Field Calibrator has compact design.
T-VAL facilitates onsite calibration of immersion/insertion sensors and includes hot zone components constructed of 304 Stainless Steel. Internal wiring is rated for continuous use at greater than 250°C, and internal insulation is rated for use at 1,000°C. Standard hot zone accommodates 0.250 in. dia sensors and has insertion depth of 2 in. Unit features stable temperature control...
Read More »
Temperature Sensors suit insertion-based applications.
Made of stainless steel alloy, EDL Needle Sensors produce temperature readings in as little as Â-¼ sec. They are available as full hypodermic grade needle or soft stainless steel temper that allows bending and shaping to fit application. Supplied in any diameter and length, products are offered in blunt, sharp, or hypodermic sharp configurations. Needles are standard with grounded design;...
Read More »Calibrator offers alternative to argon triple point units.
Cryo-Calc® Cryogenic Calibrator utilizes phase change point of liquid nitrogen to establish reference temperature of approximately 196°F. Custom-designed, injection-molded, polycarbonate lid supports system by serving as insulator to protect from heat exchange between unit and external environment. Gold-plated equalization block greatly reduces corrosion and oxidation of oxygen-free...
Read More »
Dual Channel Pyrometer is offered with RS-232 interface.
Suited for use with type K and J thermocouple sensors, instrument records temperature readings and downloads directly to PC via RS-232 computer interface. Sensors plug into back of instrument as to not interfere with front panel visibility. Unit simultaneously shows temperature output from sensors on 2 different and independent displays in 1/2 in. tall digits. Temperature ranges include -280 to...
Read More »
Pocket-Sized Digital Pyrometer operates in sub-zero temperatures.
Able to operate in outside temperatures as low as -30°C, Pocket-Probe Extended Range Pyrometer is designed for such industries as utilities and gas. Lexan window is available for use in food and pharmaceutical industries, and thermocouple support covers types K, J, T,Â- and E. Also available, Options Package includes Peak Hold Memory and Peak Hold Reset functions as well as magnetic...
Read More »
Probe Pyrometer Kit targets tire and rubber industries.
Providing instantaneous readings in 5° increments, KIT-EZK-CR E-Z Probe Pyrometer Kit includes LCD with backlight, input jacks on top and bottom, belt clip and sensor holder for access and storage, and ability to switch between °F and °C. Also included is Reinforced Fine Hypodermic Sharp Needle sensor specifically for tire and rubber industry, and both low battery and open...
Read More »
Portable Temperature Calibrator suits on-site calibration.
Designed for use with immersion or insertion sensors, T-VALH enables on-site calibrations to be performed on hard to reach sensors without removal or disconnection of sensor cables and harnesses. All hot zone components are constructed from 304 stainless steel, while control unit is in watertight O-Ring sealed case with 6 ft long connecting lead. Hot zone accommodates 0.250 in. dia sensors and...
Read More »
Mini Salt Bath weighs only 50 lb once fully loaded.
With fluid immersion depth of over 9 in., MSB-500 is suited for benchtop comparison calibrations of SPRTs and thermocouples from 180-500°C. It achieves 10 mK stabilities and uniformity using less than 14 lb of salt, and features built in RS-232 communication, and touch screen interface pre-programmed with standard calibration points for simple one-touch settings. Safety features include...
Read More »Temperature Meter provides 0.1° C accuracy.
Hand held, microprocessor-based Model LT-100 uses 24-bit A/D to generate precise temperature readings. It inputs all ASTM referenced thermocouples, K, N, J, E, T, R, S, B, C, and ±160.0000 mV dc A. Cold end reference junction is incorporated to accurately compensate for changes in ambient temperatures. When highest accuracy is required, internal electronic cold end reference can be set to...
Read More »
Surface Sensors measure temp of moving conveyor belts.
Available in variety of sizes and styles, Roller Contact Sensors feature glass-filled nylon block that can withstand temperatures up to 815°C. Protected thermocouple enables use on drums, rollers, pipes, hoses, tanks, tubes, and objects with surface speed up to 10 fps.
Read More »
Portable Field Calibrator has compact design.
T-VAL facilitates onsite calibration of immersion/insertion sensors and includes hot zone components constructed of 304 Stainless Steel. Internal wiring is rated for continuous use at greater than 250°C, and internal insulation is rated for use at 1,000°C. Standard hot zone accommodates 0.250 in. dia sensors and has insertion depth of 2 in. Unit features stable temperature control...
Read More »
Temperature Sensors suit insertion-based applications.
Made of stainless steel alloy, EDL Needle Sensors produce temperature readings in as little as Â-¼ sec. They are available as full hypodermic grade needle or soft stainless steel temper that allows bending and shaping to fit application. Supplied in any diameter and length, products are offered in blunt, sharp, or hypodermic sharp configurations. Needles are standard with grounded design;...
Read More »Calibrator offers alternative to argon triple point units.
Cryo-Calc® Cryogenic Calibrator utilizes phase change point of liquid nitrogen to establish reference temperature of approximately 196°F. Custom-designed, injection-molded, polycarbonate lid supports system by serving as insulator to protect from heat exchange between unit and external environment. Gold-plated equalization block greatly reduces corrosion and oxidation of oxygen-free...
Read More »
Dual Channel Pyrometer is offered with RS-232 interface.
Suited for use with type K and J thermocouple sensors, instrument records temperature readings and downloads directly to PC via RS-232 computer interface. Sensors plug into back of instrument as to not interfere with front panel visibility. Unit simultaneously shows temperature output from sensors on 2 different and independent displays in 1/2 in. tall digits. Temperature ranges include -280 to...
Read More »
