Novatec, Inc.
Baltimore, MD 21225
Share:
Filterless Vacuum Receivers meet needs of plastics processors.
With respectiveÂ- capacities of 1/3–3 ft³ and 1/3–2 ft³, removable-lid VR-FL and hinged-lid VRH-FL models use of cyclonic action to separate material from air flow. Separate vacuum sequencing valve is required for VR-FL models, and VRH-FL models feature built-in sequencing valve (except on 4 in. line sizes). Either style is available with...
Read More »Polymer Moisture Sensor System displays readings in real time.
MoistureMaster(TM) polymer moisture sensor system displays resin moisture content in real time, eliminating need for manual moisture analysis procedures. It is designed for molders and extruders of medical devices who must know actual polymer moisture content to maintain physical and visual properties. Stand-alone moisture sensor can be added to drying hopper regardless of brand, while color...
Read More »Touch Screen Controls On All NovaWheel(TM) Dryers, Even The Smallest - At No Additional Charge
NOVATEC, Inc. introduced touch screen controls on their full NovaWheel(TM) Dryer series at NPE 2012. This includes even their smallest wheel dryers with throughputs of 25-150 lb./hr. Models up to 500 lb./hr. include a 5.7 monochrome touch screen control while models with 600 lb./hr. through 5,000 lb./hr. throughputs include a 5.7" color touch panel. All of the NovaWheel Portable Dry/Convey models...
Read More »
Non-Desiccant Resin Dryer targets medical molders.
Specifically designed for processing small quantities of material up to 5 lb/hr, Model NDM-5 utilizes compressed air and proprietary membrane, instead of dusty desiccant beads, to draw moisture out of polymers. Materials can be changed by removing integral glass hopper and replacing it with spare hopper containing another material. To operate, user turns dryer on and sets temperature on...
Read More »
Vacuum Loader has standard brushless motor, pendant control.
Intended for use by plastics processors, GS Vacuum Loader comes standard with brushless motor and operates in upright position. Magnet-backed control can be left on side of loader or attached to 10 ft long pendant (included) and attached on side of material hopper. Control features load time, no-load alarm, alarm light, and silencer as well as proportioning and purging. Also included, GS...
Read More »Vacuum Loader comes standard with brushless motor.
GS Loader features controls that can be operated from pendant. Able to be left on side of loader or attached to 10 ft long pendant (included) and attached on side of material hopper, magnet-backed control includes load time, no-load alarm, alarm light, silencer, as well as proportioning and purging functionality. Sequential Micro-Burst blasts of air keep loader's internal filter from becoming...
Read More »
Mobile Dryer/Conveyor includes 5.7 in. touchscreen control.
Mobile NovaWheel(TM) Dry/Convey models (75, 100 and 150 lb/hr) come with color touchscreen control that, along with intuitive icons, aids setup and monitoring of all dryer and conveying functions. While standard package includes NovaWheel Dryer, vacuum blower, vacuum purge valve with slide gate discharge, and machine mount vacuum receiver, features include 7-day timer, maintenance alerts, dew...
Read More »
PLC Systems control polymer conveying systems.
Featuring color touchscreen, Siemens-based Novatec FXS PLCs handle polymer conveying systems with up to 20 pumps and 120 stations. Base panel controls up to 5 vacuum pumps, 32 material receivers with proportioning capability, and 25 purge valves. Three-port Ethernet interface permits access from any remote PC as well as connection of additional FXS or HMI modules. Expansion is accomplished via...
Read More »
Color Touch Screen Now Standard on All Medium and Large Novatec NovaWheel Dryers
Monochrome Touch Screen Standard on Small Dryers, Touch Control Is Now Standard on the Full Line Baltimore, MD - Plastic processing auxiliary equipment supplier Novatec, Inc. today announced that it has made color touch screen control standard on the medium and large models of its NovaWheel Dryers. Simultaneously, monochrome touch screen control has been made the standard interface on smaller...
Read More »
PET Drying System adjusts to material variations.
IntelliPET(TM) features desiccant wheel dryer design and airflow pattern that enable PET resin processors to conserve energy and plant space while obtaining consistent performance as result of automatic adjustment to rate and material variations. Specifically, automated temperature and speed controls adjust to variations in throughput rate, moisture level, and material temperature. Components...
Read More »
Filterless Vacuum Receivers meet needs of plastics processors.
With respectiveÂ- capacities of 1/3–3 ft³ and 1/3–2 ft³, removable-lid VR-FL and hinged-lid VRH-FL models use of cyclonic action to separate material from air flow. Separate vacuum sequencing valve is required for VR-FL models, and VRH-FL models feature built-in sequencing valve (except on 4 in. line sizes). Either style is available with...
Read More »Polymer Moisture Sensor System displays readings in real time.
MoistureMaster(TM) polymer moisture sensor system displays resin moisture content in real time, eliminating need for manual moisture analysis procedures. It is designed for molders and extruders of medical devices who must know actual polymer moisture content to maintain physical and visual properties. Stand-alone moisture sensor can be added to drying hopper regardless of brand, while color...
Read More »Touch Screen Controls On All NovaWheel(TM) Dryers, Even The Smallest - At No Additional Charge
NOVATEC, Inc. introduced touch screen controls on their full NovaWheel(TM) Dryer series at NPE 2012. This includes even their smallest wheel dryers with throughputs of 25-150 lb./hr. Models up to 500 lb./hr. include a 5.7 monochrome touch screen control while models with 600 lb./hr. through 5,000 lb./hr. throughputs include a 5.7" color touch panel. All of the NovaWheel Portable Dry/Convey models...
Read More »
Non-Desiccant Resin Dryer targets medical molders.
Specifically designed for processing small quantities of material up to 5 lb/hr, Model NDM-5 utilizes compressed air and proprietary membrane, instead of dusty desiccant beads, to draw moisture out of polymers. Materials can be changed by removing integral glass hopper and replacing it with spare hopper containing another material. To operate, user turns dryer on and sets temperature on...
Read More »
Vacuum Loader has standard brushless motor, pendant control.
Intended for use by plastics processors, GS Vacuum Loader comes standard with brushless motor and operates in upright position. Magnet-backed control can be left on side of loader or attached to 10 ft long pendant (included) and attached on side of material hopper. Control features load time, no-load alarm, alarm light, and silencer as well as proportioning and purging. Also included, GS...
Read More »Vacuum Loader comes standard with brushless motor.
GS Loader features controls that can be operated from pendant. Able to be left on side of loader or attached to 10 ft long pendant (included) and attached on side of material hopper, magnet-backed control includes load time, no-load alarm, alarm light, silencer, as well as proportioning and purging functionality. Sequential Micro-Burst blasts of air keep loader's internal filter from becoming...
Read More »
Mobile Dryer/Conveyor includes 5.7 in. touchscreen control.
Mobile NovaWheel(TM) Dry/Convey models (75, 100 and 150 lb/hr) come with color touchscreen control that, along with intuitive icons, aids setup and monitoring of all dryer and conveying functions. While standard package includes NovaWheel Dryer, vacuum blower, vacuum purge valve with slide gate discharge, and machine mount vacuum receiver, features include 7-day timer, maintenance alerts, dew...
Read More »
PLC Systems control polymer conveying systems.
Featuring color touchscreen, Siemens-based Novatec FXS PLCs handle polymer conveying systems with up to 20 pumps and 120 stations. Base panel controls up to 5 vacuum pumps, 32 material receivers with proportioning capability, and 25 purge valves. Three-port Ethernet interface permits access from any remote PC as well as connection of additional FXS or HMI modules. Expansion is accomplished via...
Read More »
Color Touch Screen Now Standard on All Medium and Large Novatec NovaWheel Dryers
Monochrome Touch Screen Standard on Small Dryers, Touch Control Is Now Standard on the Full Line Baltimore, MD - Plastic processing auxiliary equipment supplier Novatec, Inc. today announced that it has made color touch screen control standard on the medium and large models of its NovaWheel Dryers. Simultaneously, monochrome touch screen control has been made the standard interface on smaller...
Read More »
PET Drying System adjusts to material variations.
IntelliPET(TM) features desiccant wheel dryer design and airflow pattern that enable PET resin processors to conserve energy and plant space while obtaining consistent performance as result of automatic adjustment to rate and material variations. Specifically, automated temperature and speed controls adjust to variations in throughput rate, moisture level, and material temperature. Components...
Read More »