Meggitt Sensing Systems - Wilcoxon Research
Germantown, MD 20876
Intrinsically Safe Compact Accelerometer from Wilcoxon Research Expands Line of Hazardous Area Sensors
Germantown, MD - Wilcoxon Research, a Meggitt group company and a leading supplier of quality vibration sensors and sensor networks, received intrinsically safe certification on the company's new full-performance, compact, industrial accelerometer. The 780A-IS is the most recent addition to Wilcoxon Research's extensive line of hazardous area sensors. The 780A and 780A-IS are full performance,...
Read More »Accelerometer is designed for machinery health monitoring.
Capable of detecting low level vibration, Model 786-500 has 500 mV/g sensitivity with 5% sensitivity tolerance to minimize electronic noise and maximize voltage output to monitoring instrument. Unit's +3 dB broadband frequency response is from 0.2 Hz to 14 kHz. Featuring acceleration range of 10 g and broadband noise floor at 250 -µg, it is suited for slow speed condition monitoring applications...
Read More »Wilcoxon Announces Enhanced Hazardous Area Certifications
Germantown, MD -- Wilcoxon Research, a leading supplier of quality vibration sensors and sensor networks, has improved the hazardous area certifications on several of the company's most popular accelerometers. The changes in certification make the product available for a wider range of safety barriers as well as compliant with the new European ATEX standards. The sensors which received new...
Read More »
Accelerometer Magnet Bases offer high pull strength.
Featuring 7/8 in. diameter, 2-pole Model B12 provides 20 lb of force, while 2-pole Model B13, measuring 1 in. in diameter, delivers 35 lb of force. Units are suited for walk-around data collection since attaching base allows vibration sensor to be moved from point to point. Bases have -¼-28 tapped hole that can accommodate variety of threaded stud adapter sizes such as M6, M8, 3/8, and 10-32 for...
Read More »Isolator Mounting Bases isolate sensors up to 1,500 V.
Measuring 1 in. across flats with 0.82 mounting pad, Models SF21 and SF22 accommodate up to medium diameter accelerometers and small diameter side-exit accelerometers. Models SF23 and SF24 are both 1 1/8 in. across flats with 0.94 in. mounting pad that can accommodate large diameter top-exit sensors. All have -¼-28 integral stud on accelerometer side, and are used to prevent voltage spikes from...
Read More »
Vibration Accelerometer features lightweight, compact design.
Suited for walk-around collection of vibration monitoring data, 780A industrial accelerometer is 100 mV/g sensor with +5% tolerance and 3 dB frequency response from 0.4 Hz to 14 kHz. It includes 2-pin, MIL-C-5015 connector for use with existing cabling and can also be used for permanent mounting in locations where less than 0.7 in. dia is needed. Rugged, hermetically sealed, ESD-protected, and...
Read More »Sensor measures vibration displacement on rotating equipment.
PC420D is IEPE displacement transducer and 4-20 mA vibration transmitter packaged as single sensor. It outputs 4-20 mA signal, based on displacement level of machine vibration, and is able to track balance component of machines. Integrating signal into existing PLC, DCS, or SCADA system simplifies real-time health monitoring. Sensor is suited for condition based monitoring and predictive...
Read More »
Accelerometer features permanently mounted cable.
Model 787F side exit, low profile accelerometer offers permanent Viton-® boot and Teflon-® jacketed cable to provide protection in harsh environments. With fully welded construction, sensor is hermetically sealed to 1 x 10-8 cc/sec and is ESD- and EMI/RFI-protected. It has sensitivity of 100 mV/g, acceleration range of 80 G peak, amplitude non-linearity of 1%, and frequency response of...
Read More »
Accelerometer features integral cable and side-exit design.
Offering connection integrity critical for inaccessible sensor locations, 787F low-profile (1.23 in.) accelerometer has permanently mounted, integral cable that eliminates contaminant permeation concerns as well as those pertaining to connector backing off sensor. Fully welded construction, permanent Viton-® boot, and Teflon-®-jacketed cable lend to resistance against harsh operating...
Read More »Vibration Transmitter features displacement-based output.
Used for online monitoring of machinery case vibrations, iT230 converts vibration sensor signals to proportional 4-20 mA output for use in existing PLC/DCS networks. Unit measures displacement without proximity probe, instead utilizing velocity sensor and Intelligent Transmitter. Raw velocity vibration data is also available from BNC connector on front of DIN-rail mounted module for use with...
Read More »