Aviel Electronics
Las Vegas, NV 89120
Share:
Coaxial Connectors will remain securely mated.
Quick Disconnect Connectors with Lanyard Release disengage from each other upon the application of an axial force to attached lanyard, but not when applied to coaxial portion. Series is performance rated as compliant with MIL-PRF-39012 TNC connectors. Connector features include an engagement force of less than 7 lb, and 1.5 to 9 lb disengagement force at less than 10Ã-
Read More »
Connectors suit high voltage applications.
Designed for cables with jacket OD from 0.73-Ã-½ in., LC and LT Connectors can also be adapted to smaller diameter cables. Units are rated to 5,000 V standard, and up to 10,000 V with specific cable preparations. Operational range is DC to 1 GHz. Specified to MIL-PRF-39012 or MIL-C-3650 standards, both connectors maintain 50 ohm impedance, but are not interchangeable.
Read More »
Replacement Parts are produced for obsolete connectors.
Providing functional equivalents for obsolete RF coaxial connectors and adapters, replacements come in brass, stainless steel, and aluminum body materials with brass, beryllium copper, of phosphor bronze contacts. Styles include SMA, SMB, SMC, MCX, and other miniature series interfaces as well as larger interfaces such as BNC, TNC, N, C, SC, HN, LT, and LC. Bodies are produced in straight,...
Read More »
Antenna Connectors are Wi-Fi and FCC compliant.
Constructed with stainless steel, brass, or aluminum bodies, unique coupling connectors are designed for antenna connections requiring compliance with Part 15.203 of FCC regulations. Products can be completely custom units, modified versions of standard connector interfaces, or standard reverse polarity interfaces. Flange mount, crimp, and compression cable mounts can be used with uniquely...
Read More »
Custom Connectors are hermetically sealed.
Custom-designed and fabricated connectors, built to handle unique sealing requirements, can incorporate following sealing methods: O rings, epoxy seals, and glass-to-metal seals. Seals withstand air pressures of 100+ psi of pressure and helium leak rates greater than 1 x 10-8 cÃ-³/sec of helium tracer gas. Connectors can be supplied in body configurations from bulkhead, screw-in, flange...
Read More »Coaxial Connectors will remain securely mated.
Quick Disconnect Connectors with Lanyard Release disengage from each other upon the application of an axial force to attached lanyard, but not when applied to coaxial portion. Series is performance rated as compliant with MIL-PRF-39012 TNC connectors. Connector features include an engagement force of less than 7 lb, and 1.5 to 9 lb disengagement force at less than 10Ã-
Read More »
Connectors suit high voltage applications.
Designed for cables with jacket OD from 0.73-Ã-½ in., LC and LT Connectors can also be adapted to smaller diameter cables. Units are rated to 5,000 V standard, and up to 10,000 V with specific cable preparations. Operational range is DC to 1 GHz. Specified to MIL-PRF-39012 or MIL-C-3650 standards, both connectors maintain 50 ohm impedance, but are not interchangeable.
Read More »
Replacement Parts are produced for obsolete connectors.
Providing functional equivalents for obsolete RF coaxial connectors and adapters, replacements come in brass, stainless steel, and aluminum body materials with brass, beryllium copper, of phosphor bronze contacts. Styles include SMA, SMB, SMC, MCX, and other miniature series interfaces as well as larger interfaces such as BNC, TNC, N, C, SC, HN, LT, and LC. Bodies are produced in straight,...
Read More »
Antenna Connectors are Wi-Fi and FCC compliant.
Constructed with stainless steel, brass, or aluminum bodies, unique coupling connectors are designed for antenna connections requiring compliance with Part 15.203 of FCC regulations. Products can be completely custom units, modified versions of standard connector interfaces, or standard reverse polarity interfaces. Flange mount, crimp, and compression cable mounts can be used with uniquely...
Read More »
Custom Connectors are hermetically sealed.
Custom-designed and fabricated connectors, built to handle unique sealing requirements, can incorporate following sealing methods: O rings, epoxy seals, and glass-to-metal seals. Seals withstand air pressures of 100+ psi of pressure and helium leak rates greater than 1 x 10-8 cÃ-³/sec of helium tracer gas. Connectors can be supplied in body configurations from bulkhead, screw-in, flange...
Read More »