Dytran Instruments, Inc.
Chatsworth, CA 91311
DC-Coupled MEMS Accelerometers suit commercial and military use.
Model 7500M10 and 7500M11 DC-coupled analog variable capacitance accelerometers feature micro-machined capacitive sensing element housed in hermetically sealed stainless steel case. Products include VC accelerometer chip, with high drive, low-impedance buffering for optimal responsiveness. Circuit amp, differential output, and voltage regulator all minimize effects of supply voltage variation....
Read More »Charge Mode Accelerometers offer balanced differential output.
Designed to measure vibration of surfaces at temperatures up to +500Ã-
Read More »Portable Vibration Meter suits field testing of accelerometers.
Featuring built-in power supply that provides 2 mA of current at +18 Vdc, Model 4190 converts vibration signal from 10 or 100 mV/g IEPE accelerometer to PEAK value of vibration signals generated by these sensors. Two rotary switches allow user to select between accelerometer input and full scale ranges of 2, 20, and 50 g. Operating on 9 V batteries, meter features bias test switch to verify...
Read More »Accelerometers suit general purpose vibration applications.
Models 3255C and 3256C charge mode accelerometers are intended for general purpose vibration applications under high temperatures. They exhibit 15 pC/g sensitivity and feature robust, laser welded titanium construction that includes ceramic sensing element. Both are hermetically sealed, weigh only 10 grams, and have 10-32 mounting hole. Model 3255C has 10-32 radial connector and Model 3256C has a...
Read More »Vibration Measurement System withstands high temperatures.
Model 5334 includes high-temperature charge mode accelerometer, connected to input of in-line miniature differential charge amplifier via 18 in. hard line cable. Amplifier operates from constant current 2-wire IEPE power unit. Device features case-isolated design to avoid ground loops and hermetic sealing for resistance to moisture/dirt. It also features 3-bolt mount, SS construction and utilizes...
Read More »Dynamic Pressure Sensor targets variety of industrial uses.
Model 2006V2 sensor is acceleration compensated, which minimizes effects of vibration on output signal. Hermetically sealed unit features IEPE wiring configuration as well as 2-pin Mil-C-5015 connector and Ã-¼-18 NPT standard pipe thread mount. It offers sensitivity of 50 mV/psi, and 316L SS housing and diaphragm are electrically isolated from power ground. Applications include industrial...
Read More »Pressure Sensors suit field blast and shock tube application.
Featuring 1 Ã-µsec of rise time and acceleration compensation, 2301C series probe-type pressure sensors are designed to measure very fast pressure transients. Hermetically sealed units have sensitivity of 0.35 pC/psi and consist of 6 different full scale range models, from 100-15,000 psi. They are operational in temperatures up to +500Ã-
Read More »Triaxial Accelerometer suits modal analysis applications.
Offering sensitivity of 100 mV/g and broad frequency response, model 3263M9 features lightweight titanium housing, single 4-pin connector, and 4-40 tapped hole, as well as IEEE 1451.4 TEDS. Labels of X, Y, and Z axes are laser marked in large font size on 3 orthogonal faces, for aiding user in orienting sensor. Product is also suited for use in noise, vibration and harshness (NVH) testing,...
Read More »Triaxial Accelerometers have miniature, low-noise design.
Weighing 2.7 g, 3273A series features laser-welded titanium design with ceramic sensing elements coupled to JFET electronics; noise floor is 0.0012 or 0.0002 Grms depending on model. Labels of axes X, Y, and Z are laser-marked in large font size on 3 orthogonal faces, which aids the user in orienting sensor. Designed for modal analysis testing, these IEPE accelerometers are available in...
Read More »Piezoelectric Accelerometer incorporates mounting bracket.
Piezoelectric biaxial Model 3232A2 is designed for use in Health and Usage Monitoring Systems (HUMS), as well as Active Vibration Control (AVC) applications. Accelerometer elements are orthogonally mounted within bracket and are case isolated internally from mounting surface to avoid ground loops. Device features radial 3-pin Mighty Mouse connector with 5/16-28 thread, and 100 mV/g sensitivity,...
Read More »Dytran Joins Hottinger Bruel & Kjaer (HBK)
Spectris has completed the acquisition of Dytran Instruments, Inc., after the transaction received the required regulatory approval. As a result, Dytran will be integrated into the HBK business. The acquisition of Dytran will broaden HBK’s existing sensor offering and further advance its ability to design and deliver custom sensing solutions with a fast turnaround. California-based Dytran is a...
Read More »Dytran Instruments, Inc. Joins GSA Advantage!-® Program
February 28, 2017 – Chatsworth, California, USA – Dytran Instruments, Inc. (www.dytran.com) a leading manufacturer of piezoelectric and DC MEMS accelerometers, force and pressure transducers, impulse hammers and associated electronics is pleased to announce full approval by GSA, effective Feb. 8, 2017 to include over 330 of Dytran's most popular test and measurement sensors to government...
Read More »DC-Coupled MEMS Accelerometers suit commercial and military use.
Model 7500M10 and 7500M11 DC-coupled analog variable capacitance accelerometers feature micro-machined capacitive sensing element housed in hermetically sealed stainless steel case. Products include VC accelerometer chip, with high drive, low-impedance buffering for optimal responsiveness. Circuit amp, differential output, and voltage regulator all minimize effects of supply voltage variation....
Read More »Charge Mode Accelerometers offer balanced differential output.
Designed to measure vibration of surfaces at temperatures up to +500Ã-
Read More »Portable Vibration Meter suits field testing of accelerometers.
Featuring built-in power supply that provides 2 mA of current at +18 Vdc, Model 4190 converts vibration signal from 10 or 100 mV/g IEPE accelerometer to PEAK value of vibration signals generated by these sensors. Two rotary switches allow user to select between accelerometer input and full scale ranges of 2, 20, and 50 g. Operating on 9 V batteries, meter features bias test switch to verify...
Read More »Accelerometers suit general purpose vibration applications.
Models 3255C and 3256C charge mode accelerometers are intended for general purpose vibration applications under high temperatures. They exhibit 15 pC/g sensitivity and feature robust, laser welded titanium construction that includes ceramic sensing element. Both are hermetically sealed, weigh only 10 grams, and have 10-32 mounting hole. Model 3255C has 10-32 radial connector and Model 3256C has a...
Read More »Vibration Measurement System withstands high temperatures.
Model 5334 includes high-temperature charge mode accelerometer, connected to input of in-line miniature differential charge amplifier via 18 in. hard line cable. Amplifier operates from constant current 2-wire IEPE power unit. Device features case-isolated design to avoid ground loops and hermetic sealing for resistance to moisture/dirt. It also features 3-bolt mount, SS construction and utilizes...
Read More »Dynamic Pressure Sensor targets variety of industrial uses.
Model 2006V2 sensor is acceleration compensated, which minimizes effects of vibration on output signal. Hermetically sealed unit features IEPE wiring configuration as well as 2-pin Mil-C-5015 connector and Ã-¼-18 NPT standard pipe thread mount. It offers sensitivity of 50 mV/psi, and 316L SS housing and diaphragm are electrically isolated from power ground. Applications include industrial...
Read More »Pressure Sensors suit field blast and shock tube application.
Featuring 1 Ã-µsec of rise time and acceleration compensation, 2301C series probe-type pressure sensors are designed to measure very fast pressure transients. Hermetically sealed units have sensitivity of 0.35 pC/psi and consist of 6 different full scale range models, from 100-15,000 psi. They are operational in temperatures up to +500Ã-
Read More »Triaxial Accelerometer suits modal analysis applications.
Offering sensitivity of 100 mV/g and broad frequency response, model 3263M9 features lightweight titanium housing, single 4-pin connector, and 4-40 tapped hole, as well as IEEE 1451.4 TEDS. Labels of X, Y, and Z axes are laser marked in large font size on 3 orthogonal faces, for aiding user in orienting sensor. Product is also suited for use in noise, vibration and harshness (NVH) testing,...
Read More »