Dytran Instruments, Inc.

Miniature Accelerometers measure high-shock events.
Sensors, Monitors & Transducers

Miniature Accelerometers measure high-shock events.

Quartz shock accelerometers of 3200BM and 3200BT series measure mechanical shock events of up to 100,000 g amplitude. Featuring compression design quartz seismic elements, miniature instruments are offered in 6 variations each, between 2,500-70,000 g range, and weigh just 6 g. Both series are electrically isolated from sensor base and offer 10-32 axial connector. For mounting, 3200BT series has...

Read More »
Impulse Hammers feature TEDS capability.
Construction Equipment and Supplies

Impulse Hammers feature TEDS capability.

With head weight of 100 g, 5800BT Series of impulse hammers are available in 5 ranges, between 50-1,000 lbf. Acceleration compensated quartz force sensor ensures that hammer's self-resonances do not produce spurious bumps in output spectrum. Hammers include head assembly containing force sensor and handle with rubber grip, as well as interchangeable head extenders and variety of impact tips,...

Read More »
Charge Mode Accelerometer withstands ultra-high temperatures.
Sensors, Monitors & Transducers

Charge Mode Accelerometer withstands ultra-high temperatures.

Packaged in hermetically sealed stainless steel housing, Model 3218C is designed to measure vibration of surfaces at temperatures up to 900°F. It utilizes stable crystal material in self generating seismic element and has 2 ft integral hard line cable assembly with ceramic-to-metal sealed connector. Installed by using three 8-32 x Â-½ in. long socket head cap screws, device has...

Read More »
Miniature Triaxial Accelerometer suits modal analysis.
Sensors, Monitors & Transducers

Miniature Triaxial Accelerometer suits modal analysis.

Model 3023M30 contains 3 miniature quartz laminar shear mode accelerometer elements mounted orthogonally to single support to measure complete motion of point. Operating temperature is up to +325°F, and product has labels on X, Y and Z axes laser marked in large font size on 3 orthogonal faces, aiding user in orientation. Accelerometer features adhesive mount design, sensitivity of 10 mV/g,...

Read More »
IEPE Triaxial Accelerometer suits modal analysis applications.
Sensors, Monitors & Transducers

IEPE Triaxial Accelerometer suits modal analysis applications.

Model 3293A consists of 3 miniature ceramic shear mode accelerometer elements mounted to single support and welded into titanium housing. Unit features low end frequency response of ±10% down to 0.25 Hz, electrical noise floor of 0.0002 kHz, and sensitivity of 500 mV/g. Available with hermetic seal, 5-40 stud mount and single 4-pin connector, it weighs 8.8 g. Labels of axes X, Y and Z are...

Read More »
Triaxial Accelerometer is designed for modal analysis.
Sensors, Monitors & Transducers

Triaxial Accelerometer is designed for modal analysis.

Along with 2-wire internal IEPE electronics, Model 3023A9 contains 3 miniature quartz laminar shear mode accelerometer elements mounted orthogonally to each other to single support and welded into titanium housing. Device mounts using 10-32 tapped hole in base, has sensitivity of 1 mV/g, single connector, is hermetically sealed, and weighs only 4 g. Labels of X, Y, and Z axes are laser marked in...

Read More »
Ultra Miniature IEPE Accelerometer weighs 0.2 grams.
Sensors, Monitors & Transducers

Ultra Miniature IEPE Accelerometer weighs 0.2 grams.

Designed for shock and vibration measurements, Model 3224A3 has sensitivity of 5 mV/g and can operate at temperatures up to 300°F. Unit is laser welded in titanium housing, and features integrated electronics, adhesive mount, and planar shear, ceramic design. Suitable applications include environmental stress screening, PC board vibration measurements, product response, general purpose...

Read More »
Triaxial Accelerometer is for submersible applications.
Sensors, Monitors & Transducers

Triaxial Accelerometer is for submersible applications.

Model 3243A is miniature triaxial 10 mV/g accelerometer that features 2-meter moisture sealed integral cable, which allows sensor to be used in damp and moist conditions. With weight of 2.5 g and vertical height of 0.28 in., sensor is suited for situations where vertical space is limited. Model 3243A has adhesive mount and contains 3 miniature quartz shear mode accelerometer elements mounted to...

Read More »
Miniature Triaxial Accelerometer weighs 0.8 g only.
Sensors, Monitors & Transducers

Miniature Triaxial Accelerometer weighs 0.8 g only.

Featuring sensitivities of 2, 5, and 10 mV/g, 3133A series are suited for shock and vibration testing in printed circuit boards, board-mounted components, and other miniature products. With operating temperature up to +300°F, low profile unit has height of 0.23 in. and comes with 3 ft integral cable terminating to 4-pin connector. Designed for adhesive mount, triaxial IEPE accelerometer can...

Read More »
Triaxial Accelerometer includes IEEE 1451.4 TEDS.
Sensors, Monitors & Transducers

Triaxial Accelerometer includes IEEE 1451.4 TEDS.

Designed for modal analysis applications, 3273AT series features robust, laser welded titanium design that includes ceramic sensing elements coupled to ultra low noise JFET electronics. It has low end frequency response of -10% down to 0.31 Hz and is available in sensitivities of 10, 50, and 100 mV/g. Featuring hermetic seal, adhesive mount, and single 4-pin connector, this triaxial IEPE...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers