Dytran Instruments, Inc.

Piezoelectric Force Sensor offers low-mass dynamic measurement.
Sensors, Monitors & Transducers

Piezoelectric Force Sensor offers low-mass dynamic measurement.

Measuring 0.49 in. tall, Model 1022V offers precision force measurement capabilities up to 50 lbf, with 100 mV/lbf sensitivity and unloaded natural frequency of 50 kHz. Design features quartz sensing element, operating in compression mode and packaged in titanium housing with integral 5 ft coaxial cable, terminating to 10-32 coaxial connector. Series of 10-32 tapped holes, located at top and...

Read More »
Sensors, Monitors & Transducers

Miniature Accelerometer suits modal analysis applications.

Comprised of 3 accelerometers with 10, 100, and 500 mV/g sensitivities, 3305A series comes in 0.40 in.Â-³ laser welded titanium housing that is hermetically sealed for reliable operation in humid and dirty environments. IEPE-type piezoelectric accelerometers, featuring ceramic shear sensing element coupled to JFET electronics, weigh 3.7 g and offer industry standard 10-32 radial connector....

Read More »
Miniature Triaxial IEPE Accelerometers weigh 4.1 g.
Sensors, Monitors & Transducers

Miniature Triaxial IEPE Accelerometers weigh 4.1 g.

With frequency range of 1.2-10,000 Hz, 3313A series accelerometers operate at temperatures up to +250°F, while 3313AH series operates in temperatures to +325°F. Hermetically sealed units have titanium housing and include Â-¼-28 4-pin connector and 10-32 stud mount. They are designed for use in modal analysis and environmental stress screening applications, but rugged enough for...

Read More »
Low-Noise Triaxial Accelerometers enable modal analysis testing.
Sensors, Monitors & Transducers

Low-Noise Triaxial Accelerometers enable modal analysis testing.

Featuring laser-welded titanium design, 3363A series IEPE-type piezoelectric sensors have ceramic sensing elements coupled to low-noise JFET electronics. Series include low-end frequency response of -5% down to 0.3 Hz as well as optimal signal-to-noise ratio. Hermetically sealed for normal operation in moist and dirty environments, units incorporate 10-32 stud mount, 4-pin radial connector. They...

Read More »
Portable Vibration Meter suits field testing of accelerometers.
Test & Measurement

Portable Vibration Meter suits field testing of accelerometers.

Featuring built-in power supply that provides 2 mA of current at +18 Vdc, Model 4190 converts vibration signal from 10 or 100 mV/g IEPE accelerometer to PEAK value of vibration signals generated by these sensors. Two rotary switches allow user to select between accelerometer input and full scale ranges of 2, 20, and 50 g. Operating on 9 V batteries, meter features bias test switch to verify...

Read More »
Triaxial Accelerometers facilitate modal analysis testing.
Sensors, Monitors & Transducers

Triaxial Accelerometers facilitate modal analysis testing.

Featuring laser-welded titanium housing, 3333A series miniature triaxial accelerometers include ceramic sensing elements and ultra low noise JFET electronics. Products offer low-end frequency response of -10% down to 0.31 Hz and are available in sensitivities of 10, 50, and 100 mV/g. Weighing 2.3 g, they also have ultra miniature 4-pin connector, hermetic seal, and adhesive mount. Accelerometers...

Read More »
Signal Conditioner is designed for airborne flight testing.
Electronic Components & Devices

Signal Conditioner is designed for airborne flight testing.

Supplied in 6.25 x 4.00 x 1.03 in. package, 6-channel Model 4139 powers up to 6 IEPE constant current type accelerometers while adding filtering, output biasing, and output limiting to present signal overdriving. Input power, output signals, and power to accelerometers are interfaced by one D-subminiature multi-pin connector, and accelerometers are connected via six 10-32 jacks. Nominal +2.50 Vdc...

Read More »
Cubic Accelerometers suit modal analysis applications.
Sensors, Monitors & Transducers

Cubic Accelerometers suit modal analysis applications.

Packaged in 0.4 in. cubic titanium housing, 3097AT series accelerometers feature IEPE operation, TEDS, and have 5-40 stud mount and standard 4-pin connector. Laser welded titanium design includes ceramic shear sensing element coupled to ultra low noise JFET electronics package. Compact sensors weigh only 4.3 g and are offered in 3 different sensitivities: 3097A1T, 3097A2T, and 3097A3T with 10,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers