Electro-Mech Components, Inc.

New Series 900-SMT Illuminated Switches Come with PCB Pin Terminals
Electrical Equipment & Systems

New Series 900-SMT Illuminated Switches Come with PCB Pin Terminals

The SPST-DPDT-6PDT Illuminated Switches are offered with push-on-remain-in push-off and momentary snap feel, functions. The lens offer brightness of 100 fL and more and feature a lens retention force of 5-7 lbs. The switch is rated at 1.0 A resistive at 28 VDC and a switch life of 100,000 minimum actuations. The units come with different slide bar switching options, operating pressure of 32 oz....

Read More »
SW45090 Daylight Readable Switch offers a life of 100,000 minimum actuations.
Electrical Equipment & Systems

SW45090 Daylight Readable Switch offers a life of 100,000 minimum actuations.

SW45090 Daylight Readable Switch is available in 12 and 24v DC configurations that are rated at 2.0A resistive at 28 VDC. Unit can be directly driven with PWM constant current at 50 mA and weighs less than 1.2 oz. Switch mounts into 0.875 in. square mounting hole and features Momentary Snap Feel switch mechanism with an operating pressure of 32 oz and approximate plunger travel of 0.25 in. Switch...

Read More »
SW45023 Exit Door Lamp Switch enables operating pressure of 32 oz.
Electrical Equipment & Systems

SW45023 Exit Door Lamp Switch enables operating pressure of 32 oz.

Measuring less than -¾” diameter, SW45023 Exit Door Lamp Switch is rated at 2.0A resistive load at 28VDC input and switch life of 200,000 minimum cycles. Weighing less than 15 grams, unit offers custom PC pins- 0.025 square for mating into next higher assembly connector. Featuring push-On/remain-In/push-off switch mechanism with plunger travel of approximately 0.19”, device- comes...

Read More »
Lighted Pushbutton Switch is available with multiple options.
Electrical Equipment & Systems

Lighted Pushbutton Switch is available with multiple options.

Available with rubber dust boot for panel protection and enlarged lens cap to match industry-standard sizes, each SW44895 can be used in place of up to 4 individual switches. Momentary, momentary snap-feel,Â- and alternate switch actions are available. Rated for 100,000 min actuations, product offers dual- and quad-lighted displays in range of SPST to DPDT switch functions; various lens cap,...

Read More »
Bi-Color LED Switch supports DVR time stamping.
Electrical Equipment & Systems

Bi-Color LED Switch supports DVR time stamping.

Supplied in low-profile unitized housing, Series SW44834 offers circuitry from SPST to DPDT, and momentary or alternate action switching mechanisms to meet customer requirements. Switch ratings are 2.0 A resistive and 0.5 A inductive at 30 Vdc or 125 Vac. With operating pressure of 2 lb and plunger travel of 0.125 in., switch can be actuated to time stamp event on full time DVR safety video...

Read More »
Lighted Pushbutton Switch features split-image design.
Electrical Equipment & Systems

Lighted Pushbutton Switch features split-image design.

Suited for high-density instrumentation panels and display areas with limited space,Â- Series SW44863 Split-Image Switch Series features SMT LEDs on built-in PCB for backlighting 0.51 x 0.42 in. pushbutton. Features includeÂ- hidden legend lenses with multiple color options for backlighting; multi-image and horizontal or split legend faces conserve panel space. Switches feature SPST...

Read More »
Potentiometer Switch Assembly offers dual control options.
Electrical Equipment & Systems

Potentiometer Switch Assembly offers dual control options.

Measuring less than Â-¾ in.Â-², SW44687 promotes maximum operation control by offering rotary and push-on functionality from all-in-one unit. SPDT switch enables user to specify value so circuit or channel automatically opens at preset level when button is pushed. Along with momentary snap-click pushbutton switch and optional edgelit button, product features 10 KW resistance potentiometer...

Read More »
Potentiometer Switch offers rotary/push-on control options.
Electrical Equipment & Systems

Potentiometer Switch offers rotary/push-on control options.

Featuring optional edgelit button and momentary snap-click pushbutton switch, compact SW44687 measures less than Â-¾ sq in. and weighs less than 1 oz. SPDT switch is rated at 30 Vdc or 120 Vac, 1 A resistive, and 0.25 A inductive, and also features 10 kW resistance potentiometer module. Requiring less than 1 in. of space behind display panel, unit mounts via Â-¼ in. dia threaded bushing...

Read More »
Electrical Equipment & Systems

Backlit Potentiometer Switch offers dual control options.

Offered as all-in-one unit to help conserve panel space, SW44635 offers rotary and push-on/remain-in/push-off switching functionality as well as LED backlighting for maximum operation control. This DPDT switch lets user specify value so that, upon actuation, circuit or channel automatically opens at preset level. Measuring less than 1 in. dia, product requires 3 in. of space behind display panel...

Read More »
New Series 900-SMT Illuminated Switches Come with PCB Pin Terminals
Electrical Equipment & Systems

New Series 900-SMT Illuminated Switches Come with PCB Pin Terminals

The SPST-DPDT-6PDT Illuminated Switches are offered with push-on-remain-in push-off and momentary snap feel, functions. The lens offer brightness of 100 fL and more and feature a lens retention force of 5-7 lbs. The switch is rated at 1.0 A resistive at 28 VDC and a switch life of 100,000 minimum actuations. The units come with different slide bar switching options, operating pressure of 32 oz....

Read More »
SW45090 Daylight Readable Switch offers a life of 100,000 minimum actuations.
Electrical Equipment & Systems

SW45090 Daylight Readable Switch offers a life of 100,000 minimum actuations.

SW45090 Daylight Readable Switch is available in 12 and 24v DC configurations that are rated at 2.0A resistive at 28 VDC. Unit can be directly driven with PWM constant current at 50 mA and weighs less than 1.2 oz. Switch mounts into 0.875 in. square mounting hole and features Momentary Snap Feel switch mechanism with an operating pressure of 32 oz and approximate plunger travel of 0.25 in. Switch...

Read More »
SW45023 Exit Door Lamp Switch enables operating pressure of 32 oz.
Electrical Equipment & Systems

SW45023 Exit Door Lamp Switch enables operating pressure of 32 oz.

Measuring less than -¾” diameter, SW45023 Exit Door Lamp Switch is rated at 2.0A resistive load at 28VDC input and switch life of 200,000 minimum cycles. Weighing less than 15 grams, unit offers custom PC pins- 0.025 square for mating into next higher assembly connector. Featuring push-On/remain-In/push-off switch mechanism with plunger travel of approximately 0.19”, device- comes...

Read More »
Lighted Pushbutton Switch is available with multiple options.
Electrical Equipment & Systems

Lighted Pushbutton Switch is available with multiple options.

Available with rubber dust boot for panel protection and enlarged lens cap to match industry-standard sizes, each SW44895 can be used in place of up to 4 individual switches. Momentary, momentary snap-feel,Â- and alternate switch actions are available. Rated for 100,000 min actuations, product offers dual- and quad-lighted displays in range of SPST to DPDT switch functions; various lens cap,...

Read More »
Bi-Color LED Switch supports DVR time stamping.
Electrical Equipment & Systems

Bi-Color LED Switch supports DVR time stamping.

Supplied in low-profile unitized housing, Series SW44834 offers circuitry from SPST to DPDT, and momentary or alternate action switching mechanisms to meet customer requirements. Switch ratings are 2.0 A resistive and 0.5 A inductive at 30 Vdc or 125 Vac. With operating pressure of 2 lb and plunger travel of 0.125 in., switch can be actuated to time stamp event on full time DVR safety video...

Read More »
Lighted Pushbutton Switch features split-image design.
Electrical Equipment & Systems

Lighted Pushbutton Switch features split-image design.

Suited for high-density instrumentation panels and display areas with limited space,Â- Series SW44863 Split-Image Switch Series features SMT LEDs on built-in PCB for backlighting 0.51 x 0.42 in. pushbutton. Features includeÂ- hidden legend lenses with multiple color options for backlighting; multi-image and horizontal or split legend faces conserve panel space. Switches feature SPST...

Read More »
Potentiometer Switch Assembly offers dual control options.
Electrical Equipment & Systems

Potentiometer Switch Assembly offers dual control options.

Measuring less than Â-¾ in.Â-², SW44687 promotes maximum operation control by offering rotary and push-on functionality from all-in-one unit. SPDT switch enables user to specify value so circuit or channel automatically opens at preset level when button is pushed. Along with momentary snap-click pushbutton switch and optional edgelit button, product features 10 KW resistance potentiometer...

Read More »
Potentiometer Switch offers rotary/push-on control options.
Electrical Equipment & Systems

Potentiometer Switch offers rotary/push-on control options.

Featuring optional edgelit button and momentary snap-click pushbutton switch, compact SW44687 measures less than Â-¾ sq in. and weighs less than 1 oz. SPDT switch is rated at 30 Vdc or 120 Vac, 1 A resistive, and 0.25 A inductive, and also features 10 kW resistance potentiometer module. Requiring less than 1 in. of space behind display panel, unit mounts via Â-¼ in. dia threaded bushing...

Read More »
Electrical Equipment & Systems

Backlit Potentiometer Switch offers dual control options.

Offered as all-in-one unit to help conserve panel space, SW44635 offers rotary and push-on/remain-in/push-off switching functionality as well as LED backlighting for maximum operation control. This DPDT switch lets user specify value so that, upon actuation, circuit or channel automatically opens at preset level. Measuring less than 1 in. dia, product requires 3 in. of space behind display panel...

Read More »

All Topics