Brennan Industries
Solon, OH 44139
Hydraulic Fittings and Adapters have rust-resistant coating.
Hydraulic fittings and adapters feature Brennan BlackÃ-® coating, a blend of fluoropolymer, engineered plastics, and corrosion inhibitors that enables properties such as low friction, strong adhesion, and resistance to wear and abrasion. In addition to corrosion, fitting and adapter coatings are resistant to chipping as well as weather, sunlight, and salt water. Products are also protected...
Read More »Presetting Tool is made from carbon steel.
Available in sizes of 5/8 in. and up, presetting tool is used to preset ferrules on tubing prior to final assembly into fitting. It is suited for instrumentation tube fitting installations in tight spaces or hard-to-work areas.
Read More »Instrumentation-Grade Tube Fittings are interchangeable.
Double-ferrule instrumentation-grade fittings feature interchangeable nut and ferrule sets, which enables installer to use one tube fitting manufacturer's nut and ferrule sets within body of another manufacturer. They also have intermixable components that work with those of several other manufacturers. Each fitting is packaged in its own pouch and thread-protector to keep fitting clean from...
Read More »Instrumentation Fittings provide leak-proof connection.
Comprised of nut, back ferrule, front ferrule, and body, fittings produce torque-free seals that reduce hazardous leaks at tubing connections. Ferrules are tightly swaged around tube, and lack of initial strain on tubing ensures no tubing wall damage. Axial movement along tube prevents torque transmission from fitting to tubing. Resistant to temperature change, fittings work with variety of tube...
Read More »Flange Adapters come in connection sizes from -½ - 4 in.
Machined from round stock, one-piece Brennan flange adapters are hot-piercing bent for desired angle. Available in carbon and stainless steel to withstand high pressures, adapters feature swept configurations that allow them to function in limited clearance application situations.
Read More »Tube Fittings provide leak-proof and torque-free seals.
Instrumentation-grade Compression Tube Fittings consist of nut, back ferrule, front ferrule, and body that when installed become 5-piece connection providing solid, leak-free joint. Two ferrules are tightly swaged around tube and lack of initial strain on tubing ensures no tubing wall damage. Leaks are prevented because there is axial movement along tube instead of rotary motion creating joint....
Read More »Pneumatic Fittings come in push-to-connect style.
Push-to-connect pneumatic fittings allow instant connections to be made by pushing tube into fitting; no tools or other operations are necessary. Suited for mobile and in-plant applications involving compressed air, products are available in body designs and configurations measuring 1/8-1/2 in. in dia. Fittings, offered in poly and nickel-plated brass, are also offered for metric tubes with BSP...
Read More »Test Point Fittings monitor and control pressure.
Test point fittings, designed to test hydraulic systems at working pressures, allow for quick connections to monitor and control pressure, vent system, or draw samples. Connection is leak-proof before ball check is open in order to minimize contamination of hydraulic system. Self-locking metal cap further protects system. They are suited for use with hydraulic oils and other mineral-based fluids...
Read More »Hydraulic Fittings fit international threads.
International fittings are suitable for hydraulic applications where BSPP, BSPT (British), JIS, Komatsu (Japanese) and DIN (German) threads are used. They meet J.I.C., S.A.E. and international standards, are provided in more than 60 configurations, and are available in custom sizes and styles.
Read More »Fittings eliminate leaks in hydraulic systems.
O-ring face-seal fittings, available in 23 configurations and 35 different size combinations, permit operating pressures as high as 6,000 psi. They can be connected to range of tubing grades by silver brazing. Fittings are suitable for sub-zero to high-temperature applications, and are resistant to vibration and shock conditions. They meet or exceed design and performance requirements of SAE...
Read More »Hydraulic Fittings and Adapters have rust-resistant coating.
Hydraulic fittings and adapters feature Brennan BlackÃ-® coating, a blend of fluoropolymer, engineered plastics, and corrosion inhibitors that enables properties such as low friction, strong adhesion, and resistance to wear and abrasion. In addition to corrosion, fitting and adapter coatings are resistant to chipping as well as weather, sunlight, and salt water. Products are also protected...
Read More »Presetting Tool is made from carbon steel.
Available in sizes of 5/8 in. and up, presetting tool is used to preset ferrules on tubing prior to final assembly into fitting. It is suited for instrumentation tube fitting installations in tight spaces or hard-to-work areas.
Read More »Instrumentation-Grade Tube Fittings are interchangeable.
Double-ferrule instrumentation-grade fittings feature interchangeable nut and ferrule sets, which enables installer to use one tube fitting manufacturer's nut and ferrule sets within body of another manufacturer. They also have intermixable components that work with those of several other manufacturers. Each fitting is packaged in its own pouch and thread-protector to keep fitting clean from...
Read More »Instrumentation Fittings provide leak-proof connection.
Comprised of nut, back ferrule, front ferrule, and body, fittings produce torque-free seals that reduce hazardous leaks at tubing connections. Ferrules are tightly swaged around tube, and lack of initial strain on tubing ensures no tubing wall damage. Axial movement along tube prevents torque transmission from fitting to tubing. Resistant to temperature change, fittings work with variety of tube...
Read More »Flange Adapters come in connection sizes from -½ - 4 in.
Machined from round stock, one-piece Brennan flange adapters are hot-piercing bent for desired angle. Available in carbon and stainless steel to withstand high pressures, adapters feature swept configurations that allow them to function in limited clearance application situations.
Read More »Tube Fittings provide leak-proof and torque-free seals.
Instrumentation-grade Compression Tube Fittings consist of nut, back ferrule, front ferrule, and body that when installed become 5-piece connection providing solid, leak-free joint. Two ferrules are tightly swaged around tube and lack of initial strain on tubing ensures no tubing wall damage. Leaks are prevented because there is axial movement along tube instead of rotary motion creating joint....
Read More »Pneumatic Fittings come in push-to-connect style.
Push-to-connect pneumatic fittings allow instant connections to be made by pushing tube into fitting; no tools or other operations are necessary. Suited for mobile and in-plant applications involving compressed air, products are available in body designs and configurations measuring 1/8-1/2 in. in dia. Fittings, offered in poly and nickel-plated brass, are also offered for metric tubes with BSP...
Read More »Test Point Fittings monitor and control pressure.
Test point fittings, designed to test hydraulic systems at working pressures, allow for quick connections to monitor and control pressure, vent system, or draw samples. Connection is leak-proof before ball check is open in order to minimize contamination of hydraulic system. Self-locking metal cap further protects system. They are suited for use with hydraulic oils and other mineral-based fluids...
Read More »Hydraulic Fittings fit international threads.
International fittings are suitable for hydraulic applications where BSPP, BSPT (British), JIS, Komatsu (Japanese) and DIN (German) threads are used. They meet J.I.C., S.A.E. and international standards, are provided in more than 60 configurations, and are available in custom sizes and styles.
Read More »Fittings eliminate leaks in hydraulic systems.
O-ring face-seal fittings, available in 23 configurations and 35 different size combinations, permit operating pressures as high as 6,000 psi. They can be connected to range of tubing grades by silver brazing. Fittings are suitable for sub-zero to high-temperature applications, and are resistant to vibration and shock conditions. They meet or exceed design and performance requirements of SAE...
Read More »