Custom Sensors & Technologies (CST)
Thousand Oaks, CA 91320
Share:
Linear Motors feature modulated gas control.
Integrating motor and valve, Linear Motor Series provides proportional control of gas flow for energy-efficient gas heating. Synchronous model provides 10 mm displacement at 115 V, linear step speed of 0.833 or 1.67 mm/sec, and output force of 27-45 N. Featuring dual safety system, 2 stepper-based models incorporate -7.5Ã-
Read More »Pressure/Temperature Sensor has CAN protocol interface.
Suited for applications requiring CAN BUS interface, Model CS100 meets SAE J1939 communication standard. It combines ceramic capacitive sensing element, brass housing, stainless steel outer housing, and MIL-C-26482 connector. Used in wet or dry applications, sensor may be specified as gage or absolute and is available in ranges up to 300 psi. Unit operates from 5 Vdc -±0.25 V with temperature...
Read More »Pressure Transducer suits low-pressure applications.
Available in 0-0.5 through 0-5 psid/psig pressure ranges, P356 features brass, Ã-¼ in. male NPT pressure port and corrosion-resistant, alumina ceramic diaphragm. Sensor features EMI/RFI protection and is over-voltage, reverse polarity, and short-circuit protected. Excited by 5 Vdc, unit provides 0.5-4.5 linear signal output proportional to pressure. Unit also incorporates variable capacitance...
Read More »MEMS Pressure Sensor suits hydraulic/pneumatic applications.
Model P4000 incorporates micro-machined piezoresistive sensing technology in all welded, stainless steel package. Pressure ranges include 0-100 through 0-5,000 psi absolute or sealed gage. Unit has total error band of Ã-
Read More »Pressure Transducer suits industrial applications.
Built with 303 stainless steel housing, shock- and vibration-resistant P265 sensor incorporates mixed-signal CMOS ASIC and ceramic diaphragm assembly that withstands exposure to various compatible liquid and gaseous media. It suits pressure measurements of 0-15 to 0-1,000 psi, is excited by 5 Vdc, and provides linear amplified output of 0.5-4.5 Vdc, proportional to pressure. Features include...
Read More »Pressure Transducer features 316 stainless steel housing.
Model P255 provides pressure measurements of 0-15 to 0-1,000 psi, and includes ceramic diaphragm that withstands exposure to various compatible liquids and gases. Excited by 5 Vdc, transducer provides linear amplified output of 0.5-4.5 Vdc that is proportional to pressure. Unit includes over-voltage, reverse-polarity, and short circuit protection. Tolerance to shock and vibration makes it suited...
Read More »OEM Pressure Sensor operates in limited space applications.
Model P4050 utilizes micro-machined Piezoresistive sensing technology and offers pressure ranges of 0-101.5, 0-145, and 0-203 psig. It is fully amplified and temperature compensated with built-in ASIC. Molded, tube-fitted process port allows quick connection to media via flexible tubing. Unit operates on 5 Vdc and provides .5-4.5 Vdc linear output. It features overvoltage and reverse polarity...
Read More »Barometric Pressure Sensor suits on/off-highway vehicles.
Model P4050 withstands hostile environments, high vibration, and broad temperature range found in vehicle engine and powertrain applications. With its composite housing, piezoresistive sensor operates in temperatures of -40 to +125Ã-
Read More »Pressure Transducers withstand electromagnetic noise.
P321 OEM differential pressure transducers, available with pressure ranges from 0-5 PSI to 0-50 PSI (with 60 PSI operating line pressure), operate on 5 Vdc power supply, and provide 0.5 to 4.5 Vdc output. Housings are compatible with various liquids and gases, and may be specified with or without bracket assembly. Sensing technologies are repeatable, stable, and accurate, and are designed to...
Read More »Pressure Transducers are suitable for flow measurements.
OEM Differential Pressure transducers measure flow in air, water, gas, air intake, exhaust gas, coolant, oil, fuel, and product mixing and blending applications. They can be specified with pressure ranges of 1 in. of water to 0-50 psid, operate on 5 Vdc power supply, and provide 0.5 to 4.5 Vdc output. Housings are compatible with many liquids and gases. Sensors withstand high temperature, shock,...
Read More »Eric Pilaud Appointed President & CEO of Custom Sensors & Technologies
Eric Pilaud, Executive Committee member of Schneider Electric has been appointed to the position of President & CEO of Custom Sensors & Technologies (CST), effective July 1, 2009. Eric was previously in charge of Strategy, Customers, Innovation & Technology for Schneider Electric. Eric began his career as both a university professor and researcher and a corporate consultant in the information...
Read More »Linear Motors feature modulated gas control.
Integrating motor and valve, Linear Motor Series provides proportional control of gas flow for energy-efficient gas heating. Synchronous model provides 10 mm displacement at 115 V, linear step speed of 0.833 or 1.67 mm/sec, and output force of 27-45 N. Featuring dual safety system, 2 stepper-based models incorporate -7.5Ã-
Read More »Hal Grant Named CEO of Custom Sensors & Technologies (CST)
Moorpark, CA - Jean-Pascal Tricoire, Chairman of the Management Board and CEO of Schneider Electric (SE) has announced that effective March 1, 2009, Hal Grant assumed the position of CEO for Custom Sensors & Technologies (CST), headquartered in Moorpark, California. Hal joined Schneider Electric in 1985. His assignment prior to his appointment as CEO for CST was managing the Global Supply Chain...
Read More »Cockpit Control Devices
Kavlico, a global business unit of Custom Sensors & Technologies (CST) and an operation of Schneider Electric, is pleased to announce the publication of two new data sheets showcasing their Flight Spoiler Control Lever (FSCL) and their Single Engine Thrust Control devices. Both products meet the small envelope, minimum weight, and high reliability and durability demanded by today's highly...
Read More »Kavlico Publishes New Industrial Products Capability Brochure
MOORPARK, Calif. - Kavlico, an operation of Schneider Electric and a global business unit of Custom Sensors & Technologies (CST), has just released an 8 page, 4-color capability brochure highlighting their OEM and catalog sensor product families for the industrial market sector. Within the brochure is useful information detailing applications, custom design solutions, available sensing...
Read More »Kavlico Publishes New Data Sheets for Aerospace Applications
MOORPARK, Calif. - Kavlico, an operation of Schneider Electric and a global business unit of Custom Sensors & Technologies (CST), has just release two new (2-sided, 8.5 x 11) data sheets that provide product information for the Aerospace & Defense markets. The data sheets are: GA Model - Landing Gear Control (LGC) Pressure Sensors for Aerospace Applications – including combined pressure &...
Read More »Pressure/Temperature Sensor has CAN protocol interface.
Suited for applications requiring CAN BUS interface, Model CS100 meets SAE J1939 communication standard. It combines ceramic capacitive sensing element, brass housing, stainless steel outer housing, and MIL-C-26482 connector. Used in wet or dry applications, sensor may be specified as gage or absolute and is available in ranges up to 300 psi. Unit operates from 5 Vdc -±0.25 V with temperature...
Read More »Pressure Transducer suits low-pressure applications.
Available in 0-0.5 through 0-5 psid/psig pressure ranges, P356 features brass, Ã-¼ in. male NPT pressure port and corrosion-resistant, alumina ceramic diaphragm. Sensor features EMI/RFI protection and is over-voltage, reverse polarity, and short-circuit protected. Excited by 5 Vdc, unit provides 0.5-4.5 linear signal output proportional to pressure. Unit also incorporates variable capacitance...
Read More »MEMS Pressure Sensor suits hydraulic/pneumatic applications.
Model P4000 incorporates micro-machined piezoresistive sensing technology in all welded, stainless steel package. Pressure ranges include 0-100 through 0-5,000 psi absolute or sealed gage. Unit has total error band of Ã-
Read More »Pressure Transducer suits industrial applications.
Built with 303 stainless steel housing, shock- and vibration-resistant P265 sensor incorporates mixed-signal CMOS ASIC and ceramic diaphragm assembly that withstands exposure to various compatible liquid and gaseous media. It suits pressure measurements of 0-15 to 0-1,000 psi, is excited by 5 Vdc, and provides linear amplified output of 0.5-4.5 Vdc, proportional to pressure. Features include...
Read More »