ERICO International Corporation.
Solon, OH 44139
Share:
Cable Retainer facilitates cable run direction changes.
Installed vertically or horizontally on racks, ceilings, and walls, CADDY-® CATCR50 plastic, low-voltage cable support is designed for use with CAT 5e and higher, fiberoptic, and coaxial cable. Rounded edges avoid over-bending and kinking of cables, and closure has locking teeth that retain bundled cable in one-piece support. UL®-recognized for air-handling spaces, product requires nail,...
Read More »
Cable Retainer facilitates cable run direction changes.
Installed vertically or horizontally on racks, ceilings, and walls, CADDYÃ-® CATCR50 plastic, low-voltage cable support is designed for use with CAT 5e and higher, fiberoptic, and coaxial cable. Rounded edges avoid over-bending and kinking of cables, and closure has locking teeth that retain bundled cable in one-piece support. ULî-recognized for air-handling spaces, product requires...
Read More »
Independent Support Clips accommodate tall T-grids.
Designed to meet requirements of NEC-® Article 410.16-C, CADDY® IDS series accommodate 1½ and 1¾ in. tall ceiling substructures (T-grids) in order to provide separate means of support for fixtures. Products have static load limit of 65 lb, and optional barrel nuts are available for low-profile track lighting. Packaged with all mounting hardware included, products do not require any...
Read More »
Independent Support Clips accommodate tall T-grids.
Designed to meet requirements of NECÃ-® Article 410.16-C, CADDYî IDS series accommodate 1ý and 1þ in. tall ceiling substructures (T-grids) in order to provide separate means of support for fixtures. Products have static load limit of 65 lb, and optional barrel nuts are available for low-profile track lighting. Packaged with all mounting hardware included, products do not...
Read More »
Slotted Clevis Hanger helps reduce pipe hanging time.
Available in 2 and 4 in. sizes, electro-zinc plated CADDY-® SLOT LOCK is UL®-Listed and meets Factory Mutual deflection requirements without need for additional spacers. Removable slotted crossbeam accelerates assembly time and minimizes deflection by capturing top and bottom legs and locking them in place under load. Notches in crossbeam prevent it from working loose, even under extreme...
Read More »
Slotted Clevis Hanger helps reduce pipe hanging time.
Available in 2 and 4 in. sizes, electro-zinc plated CADDYÃ-® SLOT LOCK is ULî-Listed and meets Factory Mutual deflection requirements without need for additional spacers. Removable slotted crossbeam accelerates assembly time and minimizes deflection by capturing top and bottom legs and locking them in place under load. Notches in crossbeam prevent it from working loose, even under...
Read More »
Ground Rod Clamps are UL and CSA listed.
ERITECH CP58 and CP34 clamps connect conductors to ground rods or rebar to provide lightning protection and surge suppression. CP58 is UL and CSA Listed for -½ and 5/8 in. ground rods and #4 rebar, and is designed to accept #10 solid to #2 stranded conductor range. Listed for ½, 5/8, and ¾ in. ground rods, CP34 features conductor range of #10 to 1/0 wire. Both clamps are designed to...
Read More »
Ground Rod Clamps are UL and CSA listed.
ERITECH CP58 and CP34 clamps connect conductors to ground rods or rebar to provide lightning protection and surge suppression. CP58 is UL and CSA Listed for Ã-½ and 5/8 in. ground rods and #4 rebar, and is designed to accept #10 solid to #2 stranded conductor range. Listed for ý, 5/8, and þ in. ground rods, CP34 features conductor range of #10 to 1/0 wire. Both clamps are...
Read More »
Pipe Clamps suspend vertical steel pipe risers.
CADDY-® EZ RISER incorporates integrated serrated flange-head bolts that eliminate need to use wrenches on both bolt and nut during tightening, user can hold bolt in place with finger while tightening nut from front. Available for ½-12 in. steel pipes, clamps conform with Federal Specification WW-H-171 (Type 8) and Manufacturers Standardization Society SP-58 and SP-69 (Type 8). They come...
Read More »
Pipe Clamps suspend vertical steel pipe risers.
CADDYÃ-® EZ RISER incorporates integrated serrated flange-head bolts that eliminate need to use wrenches on both bolt and nut during tightening, user can hold bolt in place with finger while tightening nut from front. Available for ý-12 in. steel pipes, clamps conform with Federal Specification WW-H-171 (Type 8) and Manufacturers Standardization Society SP-58 and SP-69 (Type 8). They...
Read More »