Lindberg/MPH

Lindberg/MPH Ships Energy Efficient Stack-Type Aluminum Melting and Holding Furnace
Thermal & Heating Equipment

Lindberg/MPH Ships Energy Efficient Stack-Type Aluminum Melting and Holding Furnace

May 9, 2018 – Riverside, MI: Lindberg/MPH announced the shipment of a gas fired aluminum stack melting and holding furnace to a manufacturer of recreational vehicles. The equipment provides additional melting capacity and efficiency for a new die casting machine installation. This furnace is an integral part of a fully automated cell. Estimated melt rate is 1500 lbs. per hour. This furnace...

Read More »
Lindberg/MPH Ships Atmosphere Box Furnace to Aerospace Company
Thermal & Heating Equipment

Lindberg/MPH Ships Atmosphere Box Furnace to Aerospace Company

Riverside, MI - April 18, 2018: Lindberg/MPH announced the shipment of an electrically heated rod overbend atmosphere box furnace to the aerospace industry. The box furnace will perform a heat treatment on parts within the work chamber under a reducing atmosphere generated from a nitrogen methanol panel. The atmosphere box furnace has a maximum temperature rating of 2000°F and work chamber...

Read More »
Lindberg/MPH Ships Three Gas Fired Box Furnaces to the Oil and Gas Industry
Thermal & Heating Equipment

Lindberg/MPH Ships Three Gas Fired Box Furnaces to the Oil and Gas Industry

April 23, 2018 – Lindberg/MPH announced the shipment of three (3) natural gas fired box furnaces to a parts manufacturer for the oil and gas industry. The box furnaces will be used to develop process control requirements for heat-treating and stress relieving of underground mining/drill heads. These types of mining/drill heads only last a few hours to a few days depending on the composition of...

Read More »
Lindberg/MPH Ships Electrically Heated Cyclone Pit Furnace to a Steel Heat Treater
Thermal & Heating Equipment

Lindberg/MPH Ships Electrically Heated Cyclone Pit Furnace to a Steel Heat Treater

RIVERSIDE, CALIF. - MARCH 14, 2018 - Lindberg/MPH announced the shipment of an electrically heated cyclone pit furnace to a steel heat treater. This is a repeat customer for Lindberg/MPH and the pit furnace will replace an existing Lindberg furnace at their facility. The cyclone pit furnace will be used for a heat treating process on aircraft components. The maximum temperature rating for this...

Read More »
Lindberg/MPH Ships Three-Zone Tube Furnace to a University
Thermal & Heating Equipment

Lindberg/MPH Ships Three-Zone Tube Furnace to a University

January 24, 2018 – Lindberg/MPH announced the shipment of a three-zone tube furnace to an American University. The tube furnace is ideal for annealing, ashing, carbon and ceramic firing, drying, hardening, sintering, solution treating, stress relieving, and normalizing applications. It offers a small footprint which makes it ideal for research facilities with limited space. This tube furnace is...

Read More »
Lindberg/MPH Ships a Hot Stamping Furnace to an Automotive Supplier
Thermal & Heating Equipment

Lindberg/MPH Ships a Hot Stamping Furnace to an Automotive Supplier

December 4, 2017 – Lindberg/MPH announced the shipment of an electrically heated 3-chamber batch furnace to an automotive supplier. This multiple chamber furnace system will be used to preheat steel blanks to be used for hot stamping structural automotive components. The usage of multiple independent chambers means that multiple blanks can be simultaneously preheated resulting in reduced cycle...

Read More »
Lindberg/MPH Ships a 1200
Thermal & Heating Equipment

Lindberg/MPH Ships a 1200

November 9, 2017 – Lindberg/MPH announced the shipment of a 1200°C single zone tube furnace to a manufacturer of electronic components. The 1200°C tube furnace offers exceptional radial and linear temperature uniformity, process repeatability, rapid heat-up and response, and requires minimal maintenance. It is ideal for annealing, ashing, carbon firing, ceramic firing, hardening, sintering,...

Read More »
Lindberg/MPH Ships Two Pacemaker Furnaces to be Used for Carburizing and Hardening
Thermal & Heating Equipment

Lindberg/MPH Ships Two Pacemaker Furnaces to be Used for Carburizing and Hardening

Riverside, MI – October 20, 2017 – Lindberg/MPH announced the shipment of two electrically heated Pacemaker integral quench furnaces. The Pacemaker IQ furnaces will be used for carburizing and hardening applications. These integral quench furnace systems provide a total solution for your heat-treating processes. The Pacemaker furnaces have maximum temperature ratings of 1850°F, work chamber...

Read More »
Lindberg/MPH Ships 1200°C Tube Furnace for Technical Research and Development
Thermal & Heating Equipment

Lindberg/MPH Ships 1200°C Tube Furnace for Technical Research and Development

September 14, 2017 – Lindberg/MPH announced the shipment is 1200°C hinged, 3 zone, tube furnace. This tube furnace is designed for horizontal use and can be used with a variety of customer supplied ceramic, quartz, or alloy process tubes or retorts. This tube furnace was designed for use with the customers’ existing control system. The work chamber dimensions of this tube furnace are 36” L...

Read More »
Lindberg/MPH Ships Stackable Temperite™ and Treet-All™ Box Furnaces to Manufacturer of Maritime Equipment
Thermal & Heating Equipment

Lindberg/MPH Ships Stackable Temperite™ and Treet-All™ Box Furnaces to Manufacturer of Maritime Equipment

August 26, 2017 – Lindberg/MPH announced the shipment of a Temperite® box furnace and a TreetAll box furnace to the Maritime industry. The box furnaces are designed to be used in a stacked configuration or stand alone. They can also be used with a roller quench tank if needed. The box furnaces have work chamber dimensions of 12” W x 30” D x 12” H. The Temperite and Treet-All are a...

Read More »
Lindberg/MPH Ships Energy Efficient Stack-Type Aluminum Melting and Holding Furnace
Thermal & Heating Equipment

Lindberg/MPH Ships Energy Efficient Stack-Type Aluminum Melting and Holding Furnace

May 9, 2018 – Riverside, MI: Lindberg/MPH announced the shipment of a gas fired aluminum stack melting and holding furnace to a manufacturer of recreational vehicles. The equipment provides additional melting capacity and efficiency for a new die casting machine installation. This furnace is an integral part of a fully automated cell. Estimated melt rate is 1500 lbs. per hour. This furnace...

Read More »
Lindberg/MPH Ships Atmosphere Box Furnace to Aerospace Company
Thermal & Heating Equipment

Lindberg/MPH Ships Atmosphere Box Furnace to Aerospace Company

Riverside, MI - April 18, 2018: Lindberg/MPH announced the shipment of an electrically heated rod overbend atmosphere box furnace to the aerospace industry. The box furnace will perform a heat treatment on parts within the work chamber under a reducing atmosphere generated from a nitrogen methanol panel. The atmosphere box furnace has a maximum temperature rating of 2000°F and work chamber...

Read More »
Lindberg/MPH Ships Three Gas Fired Box Furnaces to the Oil and Gas Industry
Thermal & Heating Equipment

Lindberg/MPH Ships Three Gas Fired Box Furnaces to the Oil and Gas Industry

April 23, 2018 – Lindberg/MPH announced the shipment of three (3) natural gas fired box furnaces to a parts manufacturer for the oil and gas industry. The box furnaces will be used to develop process control requirements for heat-treating and stress relieving of underground mining/drill heads. These types of mining/drill heads only last a few hours to a few days depending on the composition of...

Read More »
Lindberg/MPH Ships Electrically Heated Cyclone Pit Furnace to a Steel Heat Treater
Thermal & Heating Equipment

Lindberg/MPH Ships Electrically Heated Cyclone Pit Furnace to a Steel Heat Treater

RIVERSIDE, CALIF. - MARCH 14, 2018 - Lindberg/MPH announced the shipment of an electrically heated cyclone pit furnace to a steel heat treater. This is a repeat customer for Lindberg/MPH and the pit furnace will replace an existing Lindberg furnace at their facility. The cyclone pit furnace will be used for a heat treating process on aircraft components. The maximum temperature rating for this...

Read More »
Lindberg/MPH Ships Three-Zone Tube Furnace to a University
Thermal & Heating Equipment

Lindberg/MPH Ships Three-Zone Tube Furnace to a University

January 24, 2018 – Lindberg/MPH announced the shipment of a three-zone tube furnace to an American University. The tube furnace is ideal for annealing, ashing, carbon and ceramic firing, drying, hardening, sintering, solution treating, stress relieving, and normalizing applications. It offers a small footprint which makes it ideal for research facilities with limited space. This tube furnace is...

Read More »
Company News

Continued Year Over Year Growth for Lindberg/MPH in 2017

Riverside, MI – December 11, 2017 – Lindberg/MPH has experienced steady growth year after year and 2017 was no exception with another year of great performance. At the beginning of the year, Lindberg/MPH invested in the future by purchasing an Emrak Press Brake and Hydraulic Swing Beam Shear to maximize their production capabilities. These equipment investments were key resources as...

Read More »
Lindberg/MPH Ships a Hot Stamping Furnace to an Automotive Supplier
Thermal & Heating Equipment

Lindberg/MPH Ships a Hot Stamping Furnace to an Automotive Supplier

December 4, 2017 – Lindberg/MPH announced the shipment of an electrically heated 3-chamber batch furnace to an automotive supplier. This multiple chamber furnace system will be used to preheat steel blanks to be used for hot stamping structural automotive components. The usage of multiple independent chambers means that multiple blanks can be simultaneously preheated resulting in reduced cycle...

Read More »
Lindberg/MPH Ships a 1200
Thermal & Heating Equipment

Lindberg/MPH Ships a 1200

November 9, 2017 – Lindberg/MPH announced the shipment of a 1200°C single zone tube furnace to a manufacturer of electronic components. The 1200°C tube furnace offers exceptional radial and linear temperature uniformity, process repeatability, rapid heat-up and response, and requires minimal maintenance. It is ideal for annealing, ashing, carbon firing, ceramic firing, hardening, sintering,...

Read More »
Lindberg/MPH Ships Two Pacemaker Furnaces to be Used for Carburizing and Hardening
Thermal & Heating Equipment

Lindberg/MPH Ships Two Pacemaker Furnaces to be Used for Carburizing and Hardening

Riverside, MI – October 20, 2017 – Lindberg/MPH announced the shipment of two electrically heated Pacemaker integral quench furnaces. The Pacemaker IQ furnaces will be used for carburizing and hardening applications. These integral quench furnace systems provide a total solution for your heat-treating processes. The Pacemaker furnaces have maximum temperature ratings of 1850°F, work chamber...

Read More »
Lindberg/MPH Ships 1200°C Tube Furnace for Technical Research and Development
Thermal & Heating Equipment

Lindberg/MPH Ships 1200°C Tube Furnace for Technical Research and Development

September 14, 2017 – Lindberg/MPH announced the shipment is 1200°C hinged, 3 zone, tube furnace. This tube furnace is designed for horizontal use and can be used with a variety of customer supplied ceramic, quartz, or alloy process tubes or retorts. This tube furnace was designed for use with the customers’ existing control system. The work chamber dimensions of this tube furnace are 36” L...

Read More »

All Topics