SignalFire Wireless Telemetry
Unit C-300
Hudson, MA 01749
New Cellular-based Transmitter Equipped with 2 Digital Inputs, 1 Analog Input and 1 Relay Output
RANGER utilizes the LTE CAT M1 technology to connect industrial sensors to the cloud for remote monitoring, control and alarming. Designed to work with a wide range of sensor types and brands making integrated into industrial monitoring systems. Available with web-and mobile-friendly SignalFire Cloud interface which allows users to remotely monitor assets, view trends and receive alarms either by...
Read More »
New PowerPAK for 4-20mA and HART Field Instrumentation
Supplies required field instrument power to remote-mounted or stranded devices. Battery-power power source is flexible, rugged, cost-effective and simple to install and use. Features push-button control and requires no software configuration.
Read More »
New DIN Gateway V2 Supports Wireless Configuration up to 240 Remote Nodes
Includes built-in automation and integrated I/O consisting of 2 digital Inputs, 2 digital outputs and 3 analog inputs. Supports wireless configuration of HART® devices via PACTware® or radar master and automatically configures as star or mesh network. Features low power consumption, integrated high-gain 5dB omnidirectional antenna and 500 mW radio operating at 902-928 MHz license-free ISM band.
Read More »
New Wireless I/O Module Integrates with Antenna Capable of 3-mile Range
Includes 2 relays to control actuators, valves and pumps plus 2 digital inputs for pulse counting or on/off type sensors. Contains analog input to measure the signal from a 1-5Vdc transmitter. Small DIN rail form factor with low power consumption makes installation and retrofit in electrical cabinets simple.
Read More »
New Link Scout Designed for Class 1 Division 1 Hazardous Areas
Allows maintenance personnel to configure, calibrate and troubleshoot assets equipped with a HART-enabled instrument using DTM software. Transit to gateway as modbus registers HART PV, SV, TV, QV & HART diagnostic flag. Installed on a live instrument while in service and retrofit during normal plant operations.
Read More »
New ModQ Sentry Modbus Flow Totalizer Maintains Internal Thirty-Day Log of Daily Flow Totals
SignalFire’s C1D2 Non-Incendive Modbus Flow Totalizer is interfaced with pulse-type inductive turbine and offers instantaneous flow rates, accumulated totals and status information. Unit is configurable for volume and time settings and features local display and Modbus RS485 data port for integrating with PLC/SCADA and DCS systems. ModQ comes with polycarbonate housing, LCD and push buttons and...
Read More »
TiltSCOUT Wireless Inclinometer features built-in three-axis sensor.
TiltSCOUT Wireless Inclinometer is designed for tank hatch detection and pump jack motion monitoring. Unit detects change in angle of the pump jack when it is operated in pump jack mode. Product is housed in NEMA4X enclosure. TiltSCOUT transfers report information to central gateway which can be connected to control center and the sensor comes with 900 mHz radio and antenna with data...
Read More »
SignalFire Flow Totalizer features built-in user-configurable clock.
SignalFire Flow Totalizers are enclosed in weather-tight polycarbonate housing. Suitable for use in oil and gas, metals and mining, chemical, power, food and beverage industries, units provide the availability of data and diagnostics locally and remotely using SignalFire Gateway with Modbus standard protocol. These Totalisers connect to inductive turbine flow meters for flow measurements and can...
Read More »
VEGAPULS 69 Level Sensors with SignalFire Remote Sensing System Automate Flour Usage Management in Pizza Production Plant
HUDSON, MA – April 5, 2017…A regional pizza commissary will soon be able to remotely and more efficiently manage flour storage silos at its production plant from locally-networked personal computers. VEGA Americas and SignalFire Wireless Telemetry have teamed up to couple VEGAPULS69 radar level instruments with a SignalFire Remote Sensing System (SFRSS) to provide a wireless remote monitoring...
Read More »
Hatch Watchdog Sensor can be operated as standard wireless node.
Used for monitoring status of tank hatches, Hatch Watchdog Sensor tracks angle of the tank hatch and reports status to central gateway for remote monitoring. Having ½ mile operating range and battery life greater than 5 years, sensors can be attached to hatch using epoxy adhesive. Unit is activated by pressing zero button for two seconds. Modbus or digital alarming is available at central...
Read More »
New Cellular-based Transmitter Equipped with 2 Digital Inputs, 1 Analog Input and 1 Relay Output
RANGER utilizes the LTE CAT M1 technology to connect industrial sensors to the cloud for remote monitoring, control and alarming. Designed to work with a wide range of sensor types and brands making integrated into industrial monitoring systems. Available with web-and mobile-friendly SignalFire Cloud interface which allows users to remotely monitor assets, view trends and receive alarms either by...
Read More »
New PowerPAK for 4-20mA and HART Field Instrumentation
Supplies required field instrument power to remote-mounted or stranded devices. Battery-power power source is flexible, rugged, cost-effective and simple to install and use. Features push-button control and requires no software configuration.
Read More »
New DIN Gateway V2 Supports Wireless Configuration up to 240 Remote Nodes
Includes built-in automation and integrated I/O consisting of 2 digital Inputs, 2 digital outputs and 3 analog inputs. Supports wireless configuration of HART® devices via PACTware® or radar master and automatically configures as star or mesh network. Features low power consumption, integrated high-gain 5dB omnidirectional antenna and 500 mW radio operating at 902-928 MHz license-free ISM band.
Read More »
New Wireless I/O Module Integrates with Antenna Capable of 3-mile Range
Includes 2 relays to control actuators, valves and pumps plus 2 digital inputs for pulse counting or on/off type sensors. Contains analog input to measure the signal from a 1-5Vdc transmitter. Small DIN rail form factor with low power consumption makes installation and retrofit in electrical cabinets simple.
Read More »
New Link Scout Designed for Class 1 Division 1 Hazardous Areas
Allows maintenance personnel to configure, calibrate and troubleshoot assets equipped with a HART-enabled instrument using DTM software. Transit to gateway as modbus registers HART PV, SV, TV, QV & HART diagnostic flag. Installed on a live instrument while in service and retrofit during normal plant operations.
Read More »SignalFire Wireless Telemetry offers the Industry's First Class1 Division 1 Wireless Tilt Sensor & Inclinometer
MARLBOROUGH, MA –August 14, 2018… SignalFire Wireless Telemetry’s Tilt Scout for angle measurement is now Class 1, Division 1 approved for operation in hazardous environments. The latest member of the Scout family of Class 1, Division 1 integrated sensor nodes, the Tilt Scout combines an intrinsically safe wireless inclinometer with a 900mHz radio and antenna and an internal battery...
Read More »
New ModQ Sentry Modbus Flow Totalizer Maintains Internal Thirty-Day Log of Daily Flow Totals
SignalFire’s C1D2 Non-Incendive Modbus Flow Totalizer is interfaced with pulse-type inductive turbine and offers instantaneous flow rates, accumulated totals and status information. Unit is configurable for volume and time settings and features local display and Modbus RS485 data port for integrating with PLC/SCADA and DCS systems. ModQ comes with polycarbonate housing, LCD and push buttons and...
Read More »SignalFire Telemetry Moves to New Corporate Headquarters - Adding Production Capacity and Training Center to Support Growth
HUDSON, MA - March 2, 2018 - SignalFire Telemetry, designer and manufacturer of reliable, user-friendly, and versatile wireless telemetry solutions for asset monitoring in industrial applications, is relocating to new corporate headquarters in Marlborough, MA. The move will support the growth of its wireless-monitoring product lines and optimize customer support and training for the company’s...
Read More »
TiltSCOUT Wireless Inclinometer features built-in three-axis sensor.
TiltSCOUT Wireless Inclinometer is designed for tank hatch detection and pump jack motion monitoring. Unit detects change in angle of the pump jack when it is operated in pump jack mode. Product is housed in NEMA4X enclosure. TiltSCOUT transfers report information to central gateway which can be connected to control center and the sensor comes with 900 mHz radio and antenna with data...
Read More »SignalFire Strengthens Sales Network and Customer Support throughout North America with Five New Automation Solution Providers
HUDSON, MA – November 15, 2017 - SignalFire Wireless Telemetry expands its customer reach and support throughout the United States and Canada by adding five new channel partners to represent its wireless telemetry solutions. These automation and instrumentation solution providers will increase responsiveness to our channel end users by offering local application engineering and product...
Read More »
