Miki Pulley US
Plymouth, MN 55441
Share:
New BXL Brakes Feature Minimal Torque Fluctuation
Available with 1.475 to 16.226 ft/lb brake torque. Comes with brakes outer diameter of 3.268” to 76.221”. Ideal for constant elevator usage where long service life with high wear resistance is required.
Read More »
New BXR-LE Brake Holds AGV in Place When Not in Use
Uses 24 VDC for a split second to overcome compression spring inertia to open the brake then consumes only 7 VDC by utilizing the BEM power control module. Static friction torque ranges from 0.044 ft.lb. to 2.36 ft.lb. Saves battery power and minimizes the number of battery recharging operations needed to keep the AGV in continuous operation.
Read More »
New Paraflex Pin-Hub Couplings from Miki Pulley are RoHS Compliant
Features include high allowable misalignment, extremely low backlash and resonance dampening. Available in two models with sizes ranges from 3.0 mm. to 22 mm. and operate in temperature environments from -30°C to +100°C. CPU model has maximum torque of 25 Nm and allows angular misalignment up to 4° whereas CPE model has 10 Nm and up to 1° respectively.
Read More »
New BXW Spring Applied Brakes Reduce Idling Wear in Articulating Joints
Features 0.88 ft. lb. – 0.369 ft. lb. brake torque, 1.457 in. to 2.953 in. outer diameter and Temperature ranging from -10°C to - 40°C. Comes with optional release lever that allows for manually releasing the brake from a hold position when restarting the servo motor and the robot’s operation. Offers handle rotating speed up to 5,000 rpm and are ideal for servo motor driven robotic arms.
Read More »
New BXW Spring Actuated Brakes are Used with Servo Motors
Available in three models for either single use braking, holding or both braking and holding and function at full torque rating. Features include quiet operation, high holding torque, space saving, long service life, stable, reliable braking power and manual release mechanisms. Comes with brake torque ranging from 0.88 ft/lb to 0.369 ft/lb and utilizes internal compression springs to provide...
Read More »
New BXH Power-Off Engaged Brake Provides Fail-safe Braking
Allows the brake to maintain position over long periods of time without power consumption. Features include quiet operation, high holding torque, lightweight, space saving design configuration and reliable braking power. Ideal for robotic systems, printing presses, paper processing systems and packaging equipment applications.
Read More »
New Couplings from Miki Pulley Feature Disk Spring Design that Provides High Torsional Rigidity and Axial Flexibility
Couplings feature high response, zero-backlash design. Capable of speed range up to 24,000 rpm, torque rating from 60 N•m to 600 N•8 depends on the model size. Provides torsional stiffness range from 104,000 Nm/rad to 970,000 Nm/rad with parallel misalignment of 0.02 mm.
Read More »
New Magnetic Couplings Use Magnetic Field for Torque Transmission
Miki Pulley’s Magnetic Couplings are available in 4 models in bore sizes ranging from 8 mm – 55 mm with torques ranging from 0.3 Nm to 182 Nm. The couplings feature rare earth neodymium magnets and transmit torque by pairing opposite magnetic poles through input and output hubs. Unit’s non-contact design provides vibration-less operation. The couplings come with start/stop function and are...
Read More »
Miki Pulley's New Step-Flex™ Couplings Offer Electric and Temperature Isolation
Step-Flex™ Couplings are offered in 9 sizes with bore sizes ranging from 3 mm - 30 mm and consist of two-plaster elastomer element combination that helps in dampening caused by the actuator carrier. In this coupling design the hard element is separated from aluminum alloy hubs with soft elastomer disc for minimizing vibration, angular and parallel misalignment. The units offer a torque of 60 Nm...
Read More »
Posi-Lock® Keyless Shaft-Hub Locking Devices from Miki Pulley Lock Gears, Sprockets, Pulleys and More in a Mechanical System - They Provide A Solid Connection Between Shaft And Mounted Devices
Plymouth, Minnesota: Posi-Lock® bushings from Miki Pulley provide a solid connection between shaft and mounted devices. They provide system designers with a keyless option for locking into position gears, pulleys, sprockets and other components in a mechanical system. Posi-Lock bushings feature socket-head cap screws that tighten quickly and easily. When tightened, these screws allow the inner...
Read More »
New BXL Brakes Feature Minimal Torque Fluctuation
Available with 1.475 to 16.226 ft/lb brake torque. Comes with brakes outer diameter of 3.268” to 76.221”. Ideal for constant elevator usage where long service life with high wear resistance is required.
Read More »
New BXR-LE Brake Holds AGV in Place When Not in Use
Uses 24 VDC for a split second to overcome compression spring inertia to open the brake then consumes only 7 VDC by utilizing the BEM power control module. Static friction torque ranges from 0.044 ft.lb. to 2.36 ft.lb. Saves battery power and minimizes the number of battery recharging operations needed to keep the AGV in continuous operation.
Read More »
New Paraflex Pin-Hub Couplings from Miki Pulley are RoHS Compliant
Features include high allowable misalignment, extremely low backlash and resonance dampening. Available in two models with sizes ranges from 3.0 mm. to 22 mm. and operate in temperature environments from -30°C to +100°C. CPU model has maximum torque of 25 Nm and allows angular misalignment up to 4° whereas CPE model has 10 Nm and up to 1° respectively.
Read More »
New BXW Spring Applied Brakes Reduce Idling Wear in Articulating Joints
Features 0.88 ft. lb. – 0.369 ft. lb. brake torque, 1.457 in. to 2.953 in. outer diameter and Temperature ranging from -10°C to - 40°C. Comes with optional release lever that allows for manually releasing the brake from a hold position when restarting the servo motor and the robot’s operation. Offers handle rotating speed up to 5,000 rpm and are ideal for servo motor driven robotic arms.
Read More »
New BXW Spring Actuated Brakes are Used with Servo Motors
Available in three models for either single use braking, holding or both braking and holding and function at full torque rating. Features include quiet operation, high holding torque, space saving, long service life, stable, reliable braking power and manual release mechanisms. Comes with brake torque ranging from 0.88 ft/lb to 0.369 ft/lb and utilizes internal compression springs to provide...
Read More »
New BXH Power-Off Engaged Brake Provides Fail-safe Braking
Allows the brake to maintain position over long periods of time without power consumption. Features include quiet operation, high holding torque, lightweight, space saving design configuration and reliable braking power. Ideal for robotic systems, printing presses, paper processing systems and packaging equipment applications.
Read More »
New Couplings from Miki Pulley Feature Disk Spring Design that Provides High Torsional Rigidity and Axial Flexibility
Couplings feature high response, zero-backlash design. Capable of speed range up to 24,000 rpm, torque rating from 60 N•m to 600 N•8 depends on the model size. Provides torsional stiffness range from 104,000 Nm/rad to 970,000 Nm/rad with parallel misalignment of 0.02 mm.
Read More »
New Magnetic Couplings Use Magnetic Field for Torque Transmission
Miki Pulley’s Magnetic Couplings are available in 4 models in bore sizes ranging from 8 mm – 55 mm with torques ranging from 0.3 Nm to 182 Nm. The couplings feature rare earth neodymium magnets and transmit torque by pairing opposite magnetic poles through input and output hubs. Unit’s non-contact design provides vibration-less operation. The couplings come with start/stop function and are...
Read More »
Miki Pulley's New Step-Flex™ Couplings Offer Electric and Temperature Isolation
Step-Flex™ Couplings are offered in 9 sizes with bore sizes ranging from 3 mm - 30 mm and consist of two-plaster elastomer element combination that helps in dampening caused by the actuator carrier. In this coupling design the hard element is separated from aluminum alloy hubs with soft elastomer disc for minimizing vibration, angular and parallel misalignment. The units offer a torque of 60 Nm...
Read More »
Posi-Lock® Keyless Shaft-Hub Locking Devices from Miki Pulley Lock Gears, Sprockets, Pulleys and More in a Mechanical System - They Provide A Solid Connection Between Shaft And Mounted Devices
Plymouth, Minnesota: Posi-Lock® bushings from Miki Pulley provide a solid connection between shaft and mounted devices. They provide system designers with a keyless option for locking into position gears, pulleys, sprockets and other components in a mechanical system. Posi-Lock bushings feature socket-head cap screws that tighten quickly and easily. When tightened, these screws allow the inner...
Read More »
