E+E Elektronik Corp.

New EE895 Sensor Module Available in Dimensions of 35 mm x 15 mm x 7 mm
Sensors, Monitors & Transducers

New EE895 Sensor Module Available in Dimensions of 35 mm x 15 mm x 7 mm

Offers a constantly high CO2 measurement accuracy, independent of altitude or changing ambient conditions. Can be flexibly configured via the digital interface as well as ideal for measuring instruments used for ventilation and climate control. Suitable for battery-operated devices such as hand-held meters, data loggers or wireless transmitters due to its low power consumption, due to its low...

Read More »
New Humidity and Temperature Probes Compatible with Rotationally Symmetric Radiation Shields
Fluid & Gas Flow Equipment

New Humidity and Temperature Probes Compatible with Rotationally Symmetric Radiation Shields

EE260 includes two freely configurable voltage outputs and an RS485 interface with Modbus RTU protocol. Sensor and probe heating enables precise and continuous humidity measurement even in areas with high humidity levels. Enclosure, made of UV- and heat-resistant thermoplastic elastomer, protects the internal electronics against environmental influences and mechanical damage.

Read More »
New EE850 Duct Mount Sensor Comes with CO2 Auto-Calibration and Temperature Compensation
Sensors, Monitors & Transducers

New EE850 Duct Mount Sensor Comes with CO2 Auto-Calibration and Temperature Compensation

The EE850 Duct Mount Sensor is designed to perform measurements of CO₂, relative humidity (RH) and temperature. The sensor features RH and T sensing element inside a probe that is protected from dust, dirt and corrosion. The unit’s digital interface offers parameters such as absolute humidity (dv), mixing ratio (r), water vapor partial pressure (e) or enthalpy (h). It is operated in the range...

Read More »
New EE23 Series Transmitters are Offered with Corrosion Resistant Coating
Electrical Equipment & Systems

New EE23 Series Transmitters are Offered with Corrosion Resistant Coating

The EE23 Series Humidity and Temperature Transmitters are available for wall or duct mount versions with a IP65 / NEMA 4 rated polycarbonate or metal enclosure. The units come in three part design that includes back cover with terminals for wiring, pluggable active part with electronics and probe and a front cover. They offer the measured data in two current or voltage outputs. The transmitter...

Read More »
New EE895 Sensor Module Available in Dimensions of 35 mm x 15 mm x 7 mm
Sensors, Monitors & Transducers

New EE895 Sensor Module Available in Dimensions of 35 mm x 15 mm x 7 mm

Offers a constantly high CO2 measurement accuracy, independent of altitude or changing ambient conditions. Can be flexibly configured via the digital interface as well as ideal for measuring instruments used for ventilation and climate control. Suitable for battery-operated devices such as hand-held meters, data loggers or wireless transmitters due to its low power consumption, due to its low...

Read More »
New Humidity and Temperature Probes Compatible with Rotationally Symmetric Radiation Shields
Fluid & Gas Flow Equipment

New Humidity and Temperature Probes Compatible with Rotationally Symmetric Radiation Shields

EE260 includes two freely configurable voltage outputs and an RS485 interface with Modbus RTU protocol. Sensor and probe heating enables precise and continuous humidity measurement even in areas with high humidity levels. Enclosure, made of UV- and heat-resistant thermoplastic elastomer, protects the internal electronics against environmental influences and mechanical damage.

Read More »
New EE850 Duct Mount Sensor Comes with CO2 Auto-Calibration and Temperature Compensation
Sensors, Monitors & Transducers

New EE850 Duct Mount Sensor Comes with CO2 Auto-Calibration and Temperature Compensation

The EE850 Duct Mount Sensor is designed to perform measurements of CO₂, relative humidity (RH) and temperature. The sensor features RH and T sensing element inside a probe that is protected from dust, dirt and corrosion. The unit’s digital interface offers parameters such as absolute humidity (dv), mixing ratio (r), water vapor partial pressure (e) or enthalpy (h). It is operated in the range...

Read More »
New EE23 Series Transmitters are Offered with Corrosion Resistant Coating
Electrical Equipment & Systems

New EE23 Series Transmitters are Offered with Corrosion Resistant Coating

The EE23 Series Humidity and Temperature Transmitters are available for wall or duct mount versions with a IP65 / NEMA 4 rated polycarbonate or metal enclosure. The units come in three part design that includes back cover with terminals for wiring, pluggable active part with electronics and probe and a front cover. They offer the measured data in two current or voltage outputs. The transmitter...

Read More »

All Topics