ClassOne Technology, Inc.
Unit 101
Kalispell, MT 59901
Major Asian GaAs Foundry Orders Multiple Solstice Electroplating Systems from ClassOne
Kalispell, MT – April 14, 2021 – ClassOne Technology (classone.com), the global provider of advanced semiconductor plating and surface preparation systems, announced that it has received a multi-tool order from one of the largest Gallium Arsenide (GaAs) foundries in Asia. The order was for ClassOne’s Solstice® S8 systems and included proprietary GoldPro™ processing chambers for...
Read More »
Defense Industry Supplier i3 Microsystems Places Repeat Order for ClassOne's Solstice Electroplating System
Kalispell, MT – March 24, 2021 – ClassOne Technology, global provider of advanced semiconductor plating tools, announced the sale of a second Solstice® S8 system to i3 Microsystems (i3M), a wholly-owned subsidiary of defense industry supplier i3 Electronics headquartered in Binghamton, NY. The eight-chambered Solstice S8 configuration includes ClassOne’s proprietary CopperMax™ chamber...
Read More »
New SoftSeal Plating Rotor Adapts Automatically to Substrate Thickness
SoftSeal rotor’s low profile enables bubble-free entry into the plating bath. High-performance FFKM elastomer seal isolates plating chemistries from the wafer’s edge-exclusion zone. Accommodates both flatted and multi-flat wafers, and it’s customizable to non-standard wafer sizes.
Read More »
ClassOne Receives Repeat Order for its Solstice Electroplating System from Major Taiwanese Semiconductor Manufacturer
Kalispell, MT – December 16, 2020 – Semiconductor equipment manufacturer ClassOne Technology announced the sale of its Solstice® S8 electroplating system to a major semiconductor foundry service based in Taiwan. This is the second S8 to be purchased by the company. The 8-chambered Solstice platform is designed specifically for ≤200mm wafer processing. The new tool will be used to produce...
Read More »
ClassOne's Solstice S4 Wet Processing System Chosen by TRUMPF
Kalispell, MT – October 7, 2020 – Semiconductor equipment manufacturer ClassOne Technology announced the sale of its Solstice® S4 fully-automated wet-processing system to one of the world’s leading VCSEL laser manufacturers, TRUMPF Photonic Components. The new Solstice S4 will be installed at the TRUMPF Photonic Components facility in Ulm, Germany. The announcement was made jointly by...
Read More »
ClassOne's Solstice LT Plating System Selected by Jenoptik for Producing High-Power Diode Lasers
Kalispell, MT – September 9, 2020 – Semiconductor equipment manufacturer ClassOne Technology announced the sale of its Solstice® LT electroplating system to Jenoptik for manufacturing semiconductor material for high-power diode lasers at its semiconductor production facility in Berlin-Adlershof, Germany. High-power diode lasers play an important role in optical pumping of solid-state...
Read More »
ClassOne's Solstice Plating System Selected for Advanced MicroLEDs
Kalispell, MT – August 5, 2020 – Semiconductor equipment manufacturer ClassOne Technology announced the sale of its Solstice® GoldPro™ electroplating system to one of the industry’s leading developers of microLED technology for advanced applications. The Solstice equipment, designed specifically for ≤200mm single-wafer processing, will be used for both R&D and production of...
Read More »
ClassOne's Solstice CopperMax Plating System Chosen for MicroLink's Advanced UAV Solar Cells
Kalispell, MT – October 15, 2019 – Semiconductor equipment manufacturer ClassOne Technology announced the sale of its Solstice® S8 electroplating system to MicroLink Devices, a manufacturer of advanced, lightweight, and flexible solar cells. The new 8-chambered Solstice equipment, designed specifically for ≤200mm processing, will be installed at the MicroLink facility in Niles, IL, where...
Read More »
Philips Photonics Selects ClassOne's Solstice S4 for Wafer Cleaning
Kalispell, MT – March 13, 2019 – Semiconductor equipment manufacturer ClassOne Technology (classone.com) announced the sale of its Solstice® S4 system to Philips Photonics, one of the industry’s leading providers of VCSEL (Vertical-Cavity Surface-Emitting Laser) devices. The announcement was made by Byron Exarcos, ClassOne Group CEO, and Hans Peter Ehweiner, General Manager at Philips...
Read More »
Ferdinand-Braun-Institut Chooses ClassOne for Three Additional Wet Processing Tools
Kalispell, MT – December 13, 2018 – ClassOne Technology, global supplier of wet processing equipment for ≤200mm semiconductor manufacturing, announced the sale of three more tools to the Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik (FBH) in Berlin, Germany. In recent weeks, FBH ordered ClassOne's high-performance 8-chamber Solstice® electroplating system. Now...
Read More »
Major Asian GaAs Foundry Orders Multiple Solstice Electroplating Systems from ClassOne
Kalispell, MT – April 14, 2021 – ClassOne Technology (classone.com), the global provider of advanced semiconductor plating and surface preparation systems, announced that it has received a multi-tool order from one of the largest Gallium Arsenide (GaAs) foundries in Asia. The order was for ClassOne’s Solstice® S8 systems and included proprietary GoldPro™ processing chambers for...
Read More »
Defense Industry Supplier i3 Microsystems Places Repeat Order for ClassOne's Solstice Electroplating System
Kalispell, MT – March 24, 2021 – ClassOne Technology, global provider of advanced semiconductor plating tools, announced the sale of a second Solstice® S8 system to i3 Microsystems (i3M), a wholly-owned subsidiary of defense industry supplier i3 Electronics headquartered in Binghamton, NY. The eight-chambered Solstice S8 configuration includes ClassOne’s proprietary CopperMax™ chamber...
Read More »
New SoftSeal Plating Rotor Adapts Automatically to Substrate Thickness
SoftSeal rotor’s low profile enables bubble-free entry into the plating bath. High-performance FFKM elastomer seal isolates plating chemistries from the wafer’s edge-exclusion zone. Accommodates both flatted and multi-flat wafers, and it’s customizable to non-standard wafer sizes.
Read More »South Korean Point Engineering Chooses ClassOne's Solstice S8 for Advanced Semiconductor Plating
Kalispell, MT – January 27, 2021 – ClassOne Technology, global supplier of high-performance semiconductor electroplating and surface preparation systems, announced the sale of its Solstice® S8 system to South Korean chip manufacturer, Point Engineering Co. The eight-chambered Solstice plating tool will be installed at Point Engineering’s manufacturing facility in Asan City, South Korea....
Read More »
ClassOne Receives Repeat Order for its Solstice Electroplating System from Major Taiwanese Semiconductor Manufacturer
Kalispell, MT – December 16, 2020 – Semiconductor equipment manufacturer ClassOne Technology announced the sale of its Solstice® S8 electroplating system to a major semiconductor foundry service based in Taiwan. This is the second S8 to be purchased by the company. The 8-chambered Solstice platform is designed specifically for ≤200mm wafer processing. The new tool will be used to produce...
Read More »
ClassOne's Solstice S4 Wet Processing System Chosen by TRUMPF
Kalispell, MT – October 7, 2020 – Semiconductor equipment manufacturer ClassOne Technology announced the sale of its Solstice® S4 fully-automated wet-processing system to one of the world’s leading VCSEL laser manufacturers, TRUMPF Photonic Components. The new Solstice S4 will be installed at the TRUMPF Photonic Components facility in Ulm, Germany. The announcement was made jointly by...
Read More »
ClassOne's Solstice LT Plating System Selected by Jenoptik for Producing High-Power Diode Lasers
Kalispell, MT – September 9, 2020 – Semiconductor equipment manufacturer ClassOne Technology announced the sale of its Solstice® LT electroplating system to Jenoptik for manufacturing semiconductor material for high-power diode lasers at its semiconductor production facility in Berlin-Adlershof, Germany. High-power diode lasers play an important role in optical pumping of solid-state...
Read More »
ClassOne's Solstice Plating System Selected for Advanced MicroLEDs
Kalispell, MT – August 5, 2020 – Semiconductor equipment manufacturer ClassOne Technology announced the sale of its Solstice® GoldPro™ electroplating system to one of the industry’s leading developers of microLED technology for advanced applications. The Solstice equipment, designed specifically for ≤200mm single-wafer processing, will be used for both R&D and production of...
Read More »
ClassOne's Solstice CopperMax Plating System Chosen for MicroLink's Advanced UAV Solar Cells
Kalispell, MT – October 15, 2019 – Semiconductor equipment manufacturer ClassOne Technology announced the sale of its Solstice® S8 electroplating system to MicroLink Devices, a manufacturer of advanced, lightweight, and flexible solar cells. The new 8-chambered Solstice equipment, designed specifically for ≤200mm processing, will be installed at the MicroLink facility in Niles, IL, where...
Read More »ClassOne's Solstice Plating System Chosen by Taiwanese Semiconductor Foundry Yee Wei
Kalispell, MT – October 4, 2019 – Semiconductor equipment manufacturer ClassOne Technology (classone.com) announced the sale of its Solstice® electroplating system to Yee Wei Co., Ltd , a semiconductor manufacturing foundry based in Taiwan. The Solstice will be installed in Yee Wei’s manufacturing facility in Toufen City, Taiwan. “We selected the Solstice for its price-performance and...
Read More »