Pentek Inc. - Digital Signal Processing
Upper Saddle River, NJ 07458
New 3U VPX Platform with Connectivity for RF and Optical Interfaces
Model 8256 utilizes VITA 46.11 and HOST aligned chassis management module. Built-in forced-air cooling supports conduction-cooled boards in a standard 19” rackmount profile chassis. Ideal for application development with Quartz® RFSoC data acquisition and processing boards.
Read More »New XMC Module with Two 400 MHz A/Ds
Model 71891 features two acquisition IP modules to simply capture and move data. Designed for connection directly to SATCOM or communications system L-band signals. Suitable for commercial, rugged or conduction cooled operating environments.
Read More »
New A/D and D/A Converter Subsystems Based on Pentek QuartzXM eXpress Modules
Model 6350S and 6353S measures 1.5 H x 4.6 W x 6.7 D and weighs just under 30 oz. Support eight 28 Gb/sec full duplex lanes using RFSoC GTY gigabit serial ports. Suitable for SIGINT and COMINT, military communications, EW countermeasures and radar transceiver.
Read More »
Pentek Announces Design Win from Telemus for ELINT UAV Applications
Ultra-wideband and high dynamic range RF/IF recorder Environmentally-sealed, conduction-cooled design ideal for harsh mechanical and thermal environments Upper Saddle River, NJ─November 19, 2020─Pentek, Inc., today announced that Telemus, Inc. has included a Pentek Talon RTX 2589 rugged IF recorder for operational use onboard Unmanned Air Vehicles (UAVs) as part of their ALR-510 ELINT/ESM...
Read More »
New A/D and D/A Converter System is IP67 Rated
Supports eight 28 Gb/sec full duplex optical lanes to a miniature rugged circular connector. Comes with built-in 100 GigE UDP interface or installation of a user provided serial protocol. Pre-loaded with a suite of Pentek IP modules and features Quartz architecture with Xilinx Zynq UltraScale+ RFSoC FPGA.
Read More »
New High-speed Synchronizer and Distribution Board Provides Four Front Panel MMCX Connectors
Model 5903 delivers multi-signal sync bus to each board to be synchronized containing sample clocks, reference clocks and gate/trigger and sync signals. Internal programmable clock generator can create sample clock frequencies from 1 to >5 GHz. Enables synchronous sampling and timing for a range of multichannel high-speed data acquisition, DSP, radar, beamforming, 5G, electronic warfare and...
Read More »
New Talon RTR 2742 RF/IF Rackmount Recorder Comes with 12-bit 6.4 GHz A/D
Capable of reproducing signals with up to 1.28 GHz of instantaneous bandwidth and includes a wide range of interpolations. Built-in digital down- and up-converters provide flexible bandwidth and tuning frequency selection for both record and playback. Offers hot-swappable data drives, front-panel USB ports and I/O connectors on the rear panel, and is optimized for cooling and ruggedized to...
Read More »
New Talon RTR 2757 4U Rackmount Recorder Houses Dual Xeon Server Class Motherboard
Capable of capturing streams in real time at rates as high as 12.5 Gigabytes per second. Includes font-panel removable NVMe storage up to 122 TB and NVME U.2 drives in RAID0 configuration. Records full 100 GbE bandwidth and offers SystemFlow software GUI with signal viewer analysis tool.
Read More »
New FPGA Development Suite for SIGINT, COMINT and ELINT Applications
Model 4818 can add FPGA IP to recorder for real-time, on-the-fly digital signal processing during the data acquisition process, reducing time associated with post-processing recorded data. Provides a development environment that steps engineers through the process of integrating custom IP into the recorder. Allows engineers to add digital signal processing IP to our signal acquisition boards.
Read More »New Converter XMC Configured with P14 PMC Connector
Model 71871 combines two texas instruments DAC3484s to deliver four independent analog outputs each through its own digital upconverter and 16-bit D/A with sampling rates to 1.25 GHz. Configured with range of kintex ultraScale FPGAs to match specific requirements of the processing task, spanning the entry-level KU035 to the high-performance KU115. Optional P16 XMC connector adds an 8X gigabit...
Read More »
New 3U VPX Platform with Connectivity for RF and Optical Interfaces
Model 8256 utilizes VITA 46.11 and HOST aligned chassis management module. Built-in forced-air cooling supports conduction-cooled boards in a standard 19” rackmount profile chassis. Ideal for application development with Quartz® RFSoC data acquisition and processing boards.
Read More »New XMC Module with Two 400 MHz A/Ds
Model 71891 features two acquisition IP modules to simply capture and move data. Designed for connection directly to SATCOM or communications system L-band signals. Suitable for commercial, rugged or conduction cooled operating environments.
Read More »
New A/D and D/A Converter Subsystems Based on Pentek QuartzXM eXpress Modules
Model 6350S and 6353S measures 1.5 H x 4.6 W x 6.7 D and weighs just under 30 oz. Support eight 28 Gb/sec full duplex lanes using RFSoC GTY gigabit serial ports. Suitable for SIGINT and COMINT, military communications, EW countermeasures and radar transceiver.
Read More »
Pentek Announces Design Win from Telemus for ELINT UAV Applications
Ultra-wideband and high dynamic range RF/IF recorder Environmentally-sealed, conduction-cooled design ideal for harsh mechanical and thermal environments Upper Saddle River, NJ─November 19, 2020─Pentek, Inc., today announced that Telemus, Inc. has included a Pentek Talon RTX 2589 rugged IF recorder for operational use onboard Unmanned Air Vehicles (UAVs) as part of their ALR-510 ELINT/ESM...
Read More »
New A/D and D/A Converter System is IP67 Rated
Supports eight 28 Gb/sec full duplex optical lanes to a miniature rugged circular connector. Comes with built-in 100 GigE UDP interface or installation of a user provided serial protocol. Pre-loaded with a suite of Pentek IP modules and features Quartz architecture with Xilinx Zynq UltraScale+ RFSoC FPGA.
Read More »
New High-speed Synchronizer and Distribution Board Provides Four Front Panel MMCX Connectors
Model 5903 delivers multi-signal sync bus to each board to be synchronized containing sample clocks, reference clocks and gate/trigger and sync signals. Internal programmable clock generator can create sample clock frequencies from 1 to >5 GHz. Enables synchronous sampling and timing for a range of multichannel high-speed data acquisition, DSP, radar, beamforming, 5G, electronic warfare and...
Read More »
New Talon RTR 2742 RF/IF Rackmount Recorder Comes with 12-bit 6.4 GHz A/D
Capable of reproducing signals with up to 1.28 GHz of instantaneous bandwidth and includes a wide range of interpolations. Built-in digital down- and up-converters provide flexible bandwidth and tuning frequency selection for both record and playback. Offers hot-swappable data drives, front-panel USB ports and I/O connectors on the rear panel, and is optimized for cooling and ruggedized to...
Read More »
New Talon RTR 2757 4U Rackmount Recorder Houses Dual Xeon Server Class Motherboard
Capable of capturing streams in real time at rates as high as 12.5 Gigabytes per second. Includes font-panel removable NVMe storage up to 122 TB and NVME U.2 drives in RAID0 configuration. Records full 100 GbE bandwidth and offers SystemFlow software GUI with signal viewer analysis tool.
Read More »
New FPGA Development Suite for SIGINT, COMINT and ELINT Applications
Model 4818 can add FPGA IP to recorder for real-time, on-the-fly digital signal processing during the data acquisition process, reducing time associated with post-processing recorded data. Provides a development environment that steps engineers through the process of integrating custom IP into the recorder. Allows engineers to add digital signal processing IP to our signal acquisition boards.
Read More »New Converter XMC Configured with P14 PMC Connector
Model 71871 combines two texas instruments DAC3484s to deliver four independent analog outputs each through its own digital upconverter and 16-bit D/A with sampling rates to 1.25 GHz. Configured with range of kintex ultraScale FPGAs to match specific requirements of the processing task, spanning the entry-level KU035 to the high-performance KU115. Optional P16 XMC connector adds an 8X gigabit...
Read More »