Manufacturers Automation Inc.
Unit 4
St Jacobs, ON N0B2N0 CAN
PT-G7828/G7728 Managed Switches provide selectable RJ45/SFP/PoE+ interfaces.
PT-G7828/G7728 Managed Switches feature dual LV/HV power modules and support hardware time-stamping synchronization that offers time-aligned data transmission. Units come with 4 fixed Gigabit ports, 6 quad-port Gigabit module slots, and 2 power module slots and hot-swappable function. Switches can be used as event recorder for GOOSE monitoring and for inspecting GOOSE messages between IEDs. Units...
Read More »
PT-G7828/G7728 Managed Switches provide selectable RJ45/SFP/PoE+ interfaces.
PT-G7828/G7728 Managed Switches feature dual LV/HV power modules and support hardware time-stamping synchronization that offers time-aligned data transmission. Units come with 4 fixed Gigabit ports, 6 quad-port Gigabit module slots, and 2 power module slots and hot-swappable function. Switches can be used as event recorder for GOOSE monitoring and for inspecting GOOSE messages between IEDs. Units...
Read More »
MGate Industrial Protocol Gateways are embedded with status monitoring function.
Offered in 5103 and 5111 models, MGate Industrial Protocol Gateways convert Modbus RTU/ASCII/TCP to PROFINET or PROFIBUS. Supporting Modbus RTU/ASCII/TCP master/slave, units are operated in -40 to 75°C temperature range. Featuring built-in Ethernet cascading, traffic monitoring and fault protection functions, gateways are designed based on IEC-62443 standards. Units come with Modbus port with 2...
Read More »
MGate Industrial Protocol Gateways are embedded with status monitoring function.
Offered in 5103 and 5111 models, MGate Industrial Protocol Gateways convert Modbus RTU/ASCII/TCP to PROFINET or PROFIBUS. Supporting Modbus RTU/ASCII/TCP master/slave, units are operated in -40 to 75°C temperature range. Featuring built-in Ethernet cascading, traffic monitoring and fault protection functions, gateways are designed based on IEC-62443 standards. Units come with Modbus port with 2...
Read More »
PSENvip 2 Camera-Based Protection System meets EN 12622 standards.
PSENvip 2 Camera-Based Protection System is used for monitoring tandem presses and is equipped with receiver. Unit offers protection range of up to 18 meters.
Read More »
PSENvip 2 Camera-Based Protection System meets EN 12622 standards.
PSENvip 2 Camera-Based Protection System is used for monitoring tandem presses and is equipped with receiver. Unit offers protection range of up to 18 meters.
Read More »
PROtop Power Supply features DCL technology.
PROtop Power Supply comes with plug-on module and offers MTBF time greater than 1,000,000 hours. Unit features O-ring MOSFET technology which allows user to enable direct parallel switching of power supplies. Product meets IEC 1709 SN29500 standard and is equipped with retrofit communication module. Power supply utilizes interface to transfer process data to high-level control.
Read More »
PROtop Power Supply features DCL technology.
PROtop Power Supply comes with plug-on module and offers MTBF time greater than 1,000,000 hours. Unit features O-ring MOSFET technology which allows user to enable direct parallel switching of power supplies. Product meets IEC 1709 SN29500 standard and is equipped with retrofit communication module. Power supply utilizes interface to transfer process data to high-level control.
Read More »
Voltage Motor Thermistor Relay provides a reaction time of less than 500 ms.
Used for protecting electric motors from overheating, DTA04 Voltage Motor Thermistor Relay features 22.5 mm wide DIN rail mount housing. Unit provides two normally open relay outputs NEMA B300 8A at 250 VAC. Operated from 24 to 240V AC/DC supply, unit comes with LED indicates alarm trigger and offers manual or auto reset option. Relays are compliant to UL 508, CSA C22.2 and EN 60255-6 standards.
Read More »
Voltage Motor Thermistor Relay provides a reaction time of less than 500 ms.
Used for protecting electric motors from overheating, DTA04 Voltage Motor Thermistor Relay features 22.5 mm wide DIN rail mount housing. Unit provides two normally open relay outputs NEMA B300 8A at 250 VAC. Operated from 24 to 240V AC/DC supply, unit comes with LED indicates alarm trigger and offers manual or auto reset option. Relays are compliant to UL 508, CSA C22.2 and EN 60255-6 standards.
Read More »
PT-G7828/G7728 Managed Switches provide selectable RJ45/SFP/PoE+ interfaces.
PT-G7828/G7728 Managed Switches feature dual LV/HV power modules and support hardware time-stamping synchronization that offers time-aligned data transmission. Units come with 4 fixed Gigabit ports, 6 quad-port Gigabit module slots, and 2 power module slots and hot-swappable function. Switches can be used as event recorder for GOOSE monitoring and for inspecting GOOSE messages between IEDs. Units...
Read More »
PT-G7828/G7728 Managed Switches provide selectable RJ45/SFP/PoE+ interfaces.
PT-G7828/G7728 Managed Switches feature dual LV/HV power modules and support hardware time-stamping synchronization that offers time-aligned data transmission. Units come with 4 fixed Gigabit ports, 6 quad-port Gigabit module slots, and 2 power module slots and hot-swappable function. Switches can be used as event recorder for GOOSE monitoring and for inspecting GOOSE messages between IEDs. Units...
Read More »
MGate Industrial Protocol Gateways are embedded with status monitoring function.
Offered in 5103 and 5111 models, MGate Industrial Protocol Gateways convert Modbus RTU/ASCII/TCP to PROFINET or PROFIBUS. Supporting Modbus RTU/ASCII/TCP master/slave, units are operated in -40 to 75°C temperature range. Featuring built-in Ethernet cascading, traffic monitoring and fault protection functions, gateways are designed based on IEC-62443 standards. Units come with Modbus port with 2...
Read More »
MGate Industrial Protocol Gateways are embedded with status monitoring function.
Offered in 5103 and 5111 models, MGate Industrial Protocol Gateways convert Modbus RTU/ASCII/TCP to PROFINET or PROFIBUS. Supporting Modbus RTU/ASCII/TCP master/slave, units are operated in -40 to 75°C temperature range. Featuring built-in Ethernet cascading, traffic monitoring and fault protection functions, gateways are designed based on IEC-62443 standards. Units come with Modbus port with 2...
Read More »
PSENvip 2 Camera-Based Protection System meets EN 12622 standards.
PSENvip 2 Camera-Based Protection System is used for monitoring tandem presses and is equipped with receiver. Unit offers protection range of up to 18 meters.
Read More »
PSENvip 2 Camera-Based Protection System meets EN 12622 standards.
PSENvip 2 Camera-Based Protection System is used for monitoring tandem presses and is equipped with receiver. Unit offers protection range of up to 18 meters.
Read More »
PROtop Power Supply features DCL technology.
PROtop Power Supply comes with plug-on module and offers MTBF time greater than 1,000,000 hours. Unit features O-ring MOSFET technology which allows user to enable direct parallel switching of power supplies. Product meets IEC 1709 SN29500 standard and is equipped with retrofit communication module. Power supply utilizes interface to transfer process data to high-level control.
Read More »
PROtop Power Supply features DCL technology.
PROtop Power Supply comes with plug-on module and offers MTBF time greater than 1,000,000 hours. Unit features O-ring MOSFET technology which allows user to enable direct parallel switching of power supplies. Product meets IEC 1709 SN29500 standard and is equipped with retrofit communication module. Power supply utilizes interface to transfer process data to high-level control.
Read More »
Voltage Motor Thermistor Relay provides a reaction time of less than 500 ms.
Used for protecting electric motors from overheating, DTA04 Voltage Motor Thermistor Relay features 22.5 mm wide DIN rail mount housing. Unit provides two normally open relay outputs NEMA B300 8A at 250 VAC. Operated from 24 to 240V AC/DC supply, unit comes with LED indicates alarm trigger and offers manual or auto reset option. Relays are compliant to UL 508, CSA C22.2 and EN 60255-6 standards.
Read More »
Voltage Motor Thermistor Relay provides a reaction time of less than 500 ms.
Used for protecting electric motors from overheating, DTA04 Voltage Motor Thermistor Relay features 22.5 mm wide DIN rail mount housing. Unit provides two normally open relay outputs NEMA B300 8A at 250 VAC. Operated from 24 to 240V AC/DC supply, unit comes with LED indicates alarm trigger and offers manual or auto reset option. Relays are compliant to UL 508, CSA C22.2 and EN 60255-6 standards.
Read More »