VadaTech
Henderson, NV 89052
Share:
UTC040C MicroTCA Carrier Hub comes with BaseT interface.
Consisting of PCIe Gen3 switch with 1024Gbps aggregate bandwidth, automatic speed negotiation, and virtual switch, UTC040C Conduction Cooled MicroTCA Carrier Hub is used for configuring JTAG Slave devices on AMC cards. Suitable for SWAP-constrained applications, hub allows for remote debugging without additional JTAG equipment. Unit comes with two/three GbE switch with 12 ports 10/100/1000-BaseT...
Read More »
ATCA 40GbE Switches deliver switching throughput of 1.2 TBit.
ATCA 40GbE Switches are available in ATC804 and ATC803 models. ATC804 switch offers dual 100GbE high speed ports, 16 SFP+ and 8 RJ45 ports and supports SyncE and IEEE 1588 protocols. Featuring zQSFP+ (QSFP28), 8 ports to SFP+, 4 QSFP+ and 8 ports to RJ-45 ports, ATC803 switch comes with Layer 3 managed 40GbE switch that routes 13 ports to each Fabric and Base Channels and two ports to Update...
Read More »
HDMI/DVI H.264 Encoder is compatible with ISO/IEC 14496-2 standards.
Used for encoding full HD to H.264, MPEG-4 and H.263 with throughput up to 1920 x 1088 at 60 fps, AMC350 Quad HDMI/DVI H.264 Encoder is suitable for surveillance, broadcast, robotics, telemedicine and industrial applications. Unit’s encoded data can be accessed via PCIe or GbE backplane routing. Capable of encoding images as small as 96 x 16 pixels (W x H), encoder rate control is configured...
Read More »
AMC005 Time and Frequency Module supports Synchronous Ethernet.
Delivering clock, 1PPS, divided-down clocks, IRIG DCLS and time trigger outputs, AMC005 Time and Frequency Module is suitable for communication networks, sonar, bi-static radar and SIGINT applications. Offering GPS / PTP (1588) / IRIG / NTP bus-level timing solution, module provides precision UTC timestamps and GPS location/time/status. Featuring optional non-volatile storage of Almanac,...
Read More »
DAQ523 Data Acquisition System comes with twelve-channel ADC.
Suitable for laser detection in remote monitoring, frequency stabilization and lock-in amplifiers, DAQ523 Data Acquisition System is designed with 2 channels of DAC (MAX5878) coupled to Xilinx Kintex-7 XC7K410T FPGA. Featuring 1310 to 1650 nm optical detection range, unit provides 0.7W/A sensitivity for input power of 0 to 160uW. Equipped with user-customizable software framework, DAQ523 provides...
Read More »
AMC599 and VPX599 ADC/DAC Modules feature Xilinx UltraScale™ XCKU115 FPGA.
Integrating dual 12-bit ADC at 6.4 GSPS and dual 16-bit DAC at 12 GSPS and 3 banks of DDR4 totaling 20GB, AMC599 and VPX599 ADC/DAC Modules are suitable for radar, jamming and SIGINT applications. Delivering 6 GSPS of signal conversion rate, units are equipped with DAQ Series software with DMA engine.
Read More »
AdvancedMC FMC Carriers feature 16GB of 64-bit wide DDR-4.
Based on Altera Arria-10™ FPGAs, AMC535 and AMC536 AdvancedMC FMC Carriers are organized as two banks for high-speed data buffering. AMC535 uses the SX660 so it is SoC enabled with a dual-core ARM Cortex-A9 MPCore. AMC536 uses GX1150 to provide 1,150 thousand Les. Used with VadaTech’s range of signal conversion and network interface FMCs, both boards support multiple open standard form...
Read More »
AMC902 IF Signal Conditioning Unit provides programmable gain.
Combined with MicroTCA sub-system for radar, SIGINT and data acquisition applications, AMC902 dual-channel IF Signal Conditioning Unit is controlled by using on-board management processor through base interface GbE or front-panel management port. Product can be used up to 15 GHz bandwidth and 56 GSPS. AMC902’s backplane is rooted with clock inputs via crossbar switch.
Read More »
VT884 MicroTCA Chassis comes with customizable backplane.
Suitable for ASIC emulation, network processing, medical imaging and high-bandwidth applications, VT884 MicroTCA Chassis is designed with redundant power supplies, dual MCH, with power cooling units and air filters. Supporting tightly-coupled networks of FPGAs, unit features Virtex UltraScale™ XCVU440, PinoutPlus™ and 3U twelve slots.
Read More »
AMC596 FPGA Carrier supports VHDL.
Based on Virtex UltraScale™ XCVU440 FPGA, AMC596 FPGA module is suitable for ASIC emulation and sensor processing applications. Supported by 8GB of 64-bit wide DDR4 and on board power PC P2040, unit provides additional connectivity of over 250 Gbps between neighboring modules by PinoutPlus™.
Read More »