VadaTech
Henderson, NV 89052
Share:

VadaTech's New OpenVPX Switch Features Switching/Routing Stack with Synchronous Ethernet Capability
VadaTech’s VPX004 OpenVPX Switch is embedded with management software that is based on Carrier Manager and Shelf Manager and can manage up to 12 payload modules within the chassis. Unit comes with optional advanced clocking, grand master clock and high-quality clock distribution/synthesis. The switch enables developers to program devices in OpenVPX environment via network connection. Unit’s...
Read More »
FMC231 Mezzanine Card Features Input/Output, Clock and Trigger Interface
FMC231 FPGA Mezzanine Card is embedded with quad ADC and quad DAC. The ADC offers 16-bit conversion rates of up to 1.0 GSPS using TI ADS54J60 and up to 2.8 GSPS with TI DAC39J84. Unit’s internal clock frequency allows user to program and is capable of locking to external reference. Unit is suitable for applications such as radar, sigint/EW, broadband wireless, communication test equipment and...
Read More »
VadaTech's MTCA.4 Chassis offers two AMC slots.
VadaTech’s MTCA.4 Chassis are available in VT817 and VT819 chassis models. VT817 chassis is designed for incorporating MTCA.4 acquisition and control hardware into a PC processing equipment. This chassis supports single-, dual- or quad-chassis expansion configuration. VT819 is designed for MTCA.4 development platform and consists of removable AC power on the rear side. VT819 supports PCIe, XAUI...
Read More »
VT882 MicroTCA Chassis comes with a JTAG Switch Module.
VT882 MicroTCA Chassis offers eight extended-size/full-size and/or mid-size AMC slots for accepting AMC.1, AMC.2, AMC.3 and/or AMC.4 modules. Unit features high-speed routing on 26 layers (40G capable) and 12.5 GHz MTCA connectors and 2-15 and 17-20 ports routed locally. VT882’s JTAG module allows transparent communication between front and JTAG port and selected AMC device. Unit’s 0 and 1...
Read More »
AMC584 UltraScale+ Module features high-speed Zone 3 connector.
AMC584 UltraScale+ Module consists of Xilinx Virtex UltraScale+™XCVU13P FPGA and two banks of 64-bit wide DDR4. Unit features QSFP28 ports that support data output of up to 5x 100 GbE over standard connectors. When combined with AMC594, the AMC584 module enables system integrators to construct signal acquisition system with up to 56 GSPS sample rates. Product can route up to twenty lanes to...
Read More »
FMC155 FPGA Mezzanine Card offers 16 LVDS input/output expansions.
Offering eight RS-485/422 RX plus eight RS-485/422 TX, and sixteen single-ended +3.3 V input/outputs, FMC155 FPGA Mezzanine Card features cross bar switch that allows input/output grouping within LVDS signals. Unit’s RS-485/422 can be full or half duplexed whereas each CBS port can be configured for routing, termination, and direction.
Read More »
Cross Bar Switch Modules come in AMC form factor.
36x36 Cross Bar Switch Modules are available in AMC241 and AMC242 versions. AMC241 allows user to route 20 lanes from the backplane to the front and supports PCIe, SRIO, 40GbE, 10GbE, GbE and Aurora protocols and rear-to-rear and front-to-front routing. Product’s routing is controlled using IPMI and comes with 4/8 SFP+ or 2/4 QSFP+ ports.
Read More »
GSPS ADC/DAC Modules are available in OpenVPX and AMC form factor.
GSPS ADC/DAC Modules are offered in AMC598, VPX598, AMC589 and VPX589 versions. AMC598 and VPX598 models offer quad ADC with sample rates of up to 3 GSPS at 14-bits and quad DAC at 16-bits with rates up to 12 GSPS. These models provide RF synthesis up to 6 GSPS and are suitable for COMINT/SIGINT, radar, research and instrumentation applications. Supported by three banks of DDR4 memory, these...
Read More »
40GbE Rugged 6-slot MicroTCA Chassis meet MIL-STD-901D standards.
VT953 Rugged MicroTCA Chassis can hold up to 6 advanced mezzanine cards. Units come with an integrated MCH with IEEE1588/SyncE/GPS capabilities. Products offer dual 40GbE to AMC slot and front panel. Chassis provide front-to-rear cooling option and feature input range of -36 to -75V, optional JTAG switch module, and virtual JTAG probe. VT953 meets 810G and MIL-STD-461F standards.
Read More »
AMC580 Zynq UltraScale+ Module supports flexible clocking.
Allowing for large buffer sizes during processing, the AMC580 Zynq UltraScale+ Module's FPGA is equipped with an interface to a single DDR4 memory channel. Designed to excel in next-generation wired and 5G wireless infrastructure, the product offers 64GB of flash, 128MB of boot flash, a quad-core ARM processor, and specialized processing elements.
Read More »