VadaTech
Henderson, NV 89052
Share:
VadaTech Introduces AMC598 and VPX598 Boards with Sample Rates Up to 3 GSPS
The AMC598 and VPX598 boards come with re-configurable UltraScale™ XCKU115 FPGA that can be interfaced directly to ADC/DAC. The AMC598 board is offered with an 8 HP panel size whereas the VPX598 board comes with on-board dedicated health management CPU. The VPX598 routes x8 high speed SERDES to the P1 and x8 high speed SERDES to P2 that are configured as PCIe/SRIO/10GbE/Aurora and...
Read More »
VadaTech Introduces AMC645 Storage Module Featuring 8 GB of DDR4 with ECC
The AMC645 NVMe HBA Storage Module features up to 16 NVMe storage devices that are soldered directly to the board. The module is offered in both air-cooled (MTCA.0 and MTCA.1) and rugged–cooled versions (MTCA.2 or MTCA.3). The unit supports RAID level 0, 1, 5, 6, 10, 50 and 60, End-to-End CRC and advanced Error Reporting. It comes with PCIe Gen3 x8 or single x4 routed to the fabric ports 4-11...
Read More »
VadaTech Introduces VPX551 FPGA Module with Tier 2 Platform Health Management/Monitoring Capability
The VPX551 FPGA Compute Module is designed for signal processing and beamforming applications. The product offers dual Kintex UltraScale™ XCKU115 FPGAs with over 1,400K logic cells each. The unit interfaces directly to rear I/O via SERDES, LVDS and fiber. The modules can be connected by four SERDES lanes for high speed communication and load sharing. The VPX551 features an on-board management...
Read More »
New 3U VPX Virtex UltraScale+ FPGA Board from VadaTech Features 5.4 GSPS 12-bit ADC and 6 GSPS 12-bit DAC
The new VPX570 is a low-latency RF ADC/DAC module from VadaTech features rates up to 5.4 GSPS and a DAC supporting rates up to 6 GSPS, both at 12 bits. The product avoids latency with parallel interfaces directly to rear I/O to the FAGA using a large 360 Mb on-chip UltraRAM with the ADC and DAC selection. Capabilities include a platform health management and monitoring. Available in a...
Read More »
New Wideband Transceiver in 3U VPX Form Factor
The VPX597 unit has four AD9371 connected to a Kintex UltraScale™ FPGA providing eight transceiver channels. The transmit synthesis bandwidth to 250 MHz with a receive bandwidth of 8 MHz to 100 MHz. The FPGA has two banks of DDR4 memory.
Read More »
VadaTech Introduces New One Slot 6U VPX Benchtop Development Chassis Featuring Increased Ease of Access for Probing and Debugging
VadaTech has announced the release of their new one slot 6U VPX benchtop development chassis, the VTX991. The VTX991 is used for board bring-up and testing of 6U VPX modules and can accept a front and a rear module. The panels on the front and rear slots are removable, increasing ease for probing and debugging. It can be placed on bench in horizontal or vertical positioning for easier access as...
Read More »
AMC541 AMC Carrier Board from VadaTech Intefaces with FPGA and DSP in Different Configurations
The AMC541 AMC Carrier Board is offered with on-board FPGA to the fabric clock (AMC FCLKA) and user clocks and triggers (TCLKA-D) via a clock and jitter cleaner. The unit couples with XCZU19EG MPSoC FPGA with the TCI6638K2K communications for a wireless infrastructure module. The FPGA board features dual banks of 64-bit DDR4 memory and an SD card. The module routes GbE on ports 0 and 1 per AMC.2...
Read More »
New AMC585 Carrier Board Meets AMC.1, AMC.2 and AMC.4 Specifications
VadaTech’s AMC585 AMC Carrier Board comes with on-board reconfigurable FPGA that interfaces to AMC FCLKA, TCLKA-D, FMC DP0-23 and all FMC+ LA/HA/HB pairs. The unit features a 64GB of DDR-4 memory channel, on-board 64 GB of Flash and 128 MB of boot flash. The AMC585 is based on XCZU19EG MPSoC FPGA. The XCZU19EG is designed with quad-core ARM application processor, dual-core ARM real-time...
Read More »
New AMC581 and VPX581 FPGA Carrier Boards Provide 3,528 DSP Slices and 746k Logic Cells
VadaTech’s AMC581 and VPX581 cards are based on Xilinx UltraScale+TM XCZU15EG MPSoC FPGA. The AMC581 is compliant to AMC.1, AMC.2 and AMC.4 standards and features on-board re-configurable FPGA that interfaces directly to AMC FCLKA, TCLKA-D, FMC DP0-9 and all FMC LA/HA/HB pairs. The VPX581 board consists of Health Management processor that supports VITA 46.11 Tier-2 command set. AMC581 board...
Read More »
New ADC/DAC Modules Offer Signal Processing Bandwidth at over 20 TeraMACs of DSP Compute Performance
VadaTech ADC/DAC Modules are available in AMC587 and AMC588 models. AMC587 offers 12-bit ADC with sample rates of up to 6.4GSPS or quad inputs at 3.2 GSPS. AMC588 module provides eight transceivers channels with a frequency range of 300 MHz to 6 GHz. AMC587 is suitable for capture analysis in COMINT/SIGINT applications, whereas the AMC588 is used in SDR, BTS and antenna systems. Both modules come...
Read More »