VadaTech

PCIe Gen3 Expansion Solution works with MicroTCA, other systems.
Agricultural & Farming Products

PCIe Gen3 Expansion Solution works with MicroTCA, other systems.

PCIe-compliant module, PCI123, routes x16 PCIe Gen 3 out of front panel ports. Utilizing SFF-8644 connectors, signals can be partitioned as single x16, dual x8, or quad x4 as required. Module supports aggregate raw data rate up to 128 Gbps and can be cabled to UTC006 MicroTCA Carrier Hub (MCH) for PCIe Expansion. Offering quad SFF-8644 ports for PCIe Gen3 expansion (x16, x8, or x4) and PCIe...

Read More »
Dual D/A Converter features high sampling rate.
Electrical Equipment & Systems

Dual D/A Converter features high sampling rate.

Compliant to MicroTCA.4 specification for High Energy Physics, Model AMC523 provides sampling rate of 250 MS/s at 16-bit resolution. Unit comesÂ- in mid-size double module, routing x8 or dual x4 PCIe to backplane. Featuring Kintex-7 FPGA with 2 GB of DDR3 memory, module allows for large buffer sizes to be storing during processing and queuing data to host. DAC connects with...

Read More »
PCIe Gen3 Carrier Board fosters as-needed video board upgrades.
Computer Hardware & Peripherals

PCIe Gen3 Carrier Board fosters as-needed video board upgrades.

AMC104 enables use of high-end commercial video or other graphics cards as removable mezzanines in MicroTCA system. By providing carrier, users can upgrade PCIe GPGPU or other video board as needed to serve application requirements. Product is available as double module, full size, and routes PCIe Gen3 to backplane as x4 or x8. Other features include temperature sensor, DIP switches for IPMI...

Read More »
FPGA Mezzanine Card combines A/D and D/A converter.
Electrical Equipment & Systems

FPGA Mezzanine Card combines A/D and D/A converter.

Compliant to VITA 57 specification, Model FMC525 combines 14-bit 5.7 Gsps D/A converter and 12-bit 4.0 Gsps A/D converter. DAC core is based on quad-switch architecture that enables dual-edge clocking operation, increasing DAC update rate to 5.7 Gsps when configured for Mix-Mode™ or 2x interpolation. Input sampling clock can be via front panel or on board wide-band PLL. Model FMC525 is suited...

Read More »
Rugged MicroTCA Chassis features high-density design.
Computer Hardware & Peripherals

Rugged MicroTCA Chassis features high-density design.

Featuring aluminum construction and reinforced cover, 6-slot 1U Model VT950 holds up to 6 Advanced Mezzanine Cards and has integrated MCH with IEEE1588/SyncE/GPS capabilities, including clock disciplining with arbitrary clock frequency output and holdover. MCH can use fabrics such as 40 GbE/10 GbE, PCIe Gen 3, or Serial RapidIO. Offering front-to-rear cooling with 500 W universal AC or 400 W DC...

Read More »
Communication Systems & Equipment

VadaTech Selected for Airborne RADAR Signal Processing and Data Recording Application

A military prime contractor in the USA has chosen MicroTCA for its airborne RADAR application. The system combines the functionality of A/D D/A Conversion, data processing, and storage in two rugged 1U rackmount systems. Both the transceiver" system and the "storage" system utilize the same rugged chassis, but with vastly different payloads. The customer required a high-performance, compact,...

Read More »
AdvancedTCA Carrier is designed for PCIe Gen 3 cards.
Architectural & Civil Engineering Products

AdvancedTCA Carrier is designed for PCIe Gen 3 cards.

Along with Intel® Xeon® E3-1268L V3 processor (quad-core @ 2.3 GHz or turbo frequency @ 3.3 GHz), ATC121 features x16 PCIe Gen 3 slot that accepts any PCIe edge-type module. Dual RJ-45, USB, and RS-232 ports are standard, and graphics ports include dual Display Port inputÂ- as well as DVI-D and Display Port outputs. Customized versions afford different I/O front panel...

Read More »
Dual Wideband Transceiver is available in FMC format.
Communication Systems & Equipment

Dual Wideband Transceiver is available in FMC format.

Suited for LTE, SDR, and other RF applications, FMC214 comes in FPGA Mezzanine Card (FMC) format, has 70 MHz to 6 GHz range, and utilizesÂ- 8 SSMC connectors for I/O. TDD- and FDD-compatible board combines RF front end, frequency synthesizers for Rx and Tx, mixed-signal baseband section, and digital interface to host processor through LPC connector. Instantaneous bandwidth is...

Read More »
MicroTCA.4 Chassis offers high poerformance in 2U height.
Computer Hardware & Peripherals

MicroTCA.4 Chassis offers high poerformance in 2U height.

Featuring 6 double module AMC slots and corresponding Rear Transition Modules (RTMs), MCH slot, and redundant power supplies, horizontal-mountÂ- VT814 complies to MicroTCA.4 specification for High Energy Physics and other applications requiring rear I/O. Chassis accepts up to 2 VadaTech 500 W (UTC017) or 796 W (UTC013) AC power supplies, and 40 GbE-capable backplane equalizes clock...

Read More »
VadaTech Releases Xilinx Zynq FPGA with On-board Clock and Jitter Cleaner
Computer Hardware & Peripherals

VadaTech Releases Xilinx Zynq FPGA with On-board Clock and Jitter Cleaner

Henderson, NV – VadaTech, a manufacturer of embedded boards and complete application-ready platforms, has announced a FPGA in the Advanced Mezzanine Card (AMC) form factor that utilizes the Xilinx® Zynq® all programmable SoC. The AMC518 from VadaTech comes in a single module, mid-size AMC that allows an FMC per VITA 57 to be plugged into the carrier.Â-  The unit has an...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers