Company News


11540 South Eastern Ave., Henderson, NV, 89052, USA

  • 702-896-3337

Latest New Product News from

Computer Hardware & Peripherals, Test & Measuring Instruments

FMC155 FPGA Mezzanine Card offers 16 LVDS input/output expansions.

Jan 13, 2018

Offering eight RS-485/422 RX plus eight RS-485/422 TX, and sixteen single-ended +3.3 V input/outputs, FMC155 FPGA Mezzanine Card features cross bar switch that allows input/output grouping within LVDS signals. Unit’s RS-485/422 can be full or half duplexed whereas each CBS port can be configured for routing, termination, and direction.

Read More

Controls & Controllers

Cross Bar Switch Modules come in AMC form factor.

Dec 20, 2017

36x36 Cross Bar Switch Modules are available in AMC241 and AMC242 versions. AMC241 allows user to route 20 lanes from the backplane to the front and supports PCIe, SRIO, 40GbE, 10GbE, GbE and Aurora protocols and rear-to-rear and front-to-front routing. Product’s routing is controlled using IPMI and comes with 4/8 SFP+ or 2/4 QSFP+ ports.

Read More

GSPS ADC/DAC Modules are available in OpenVPX and AMC form factor.

Nov 22, 2017

GSPS ADC/DAC Modules are offered in AMC598, VPX598, AMC589 and VPX589 versions. AMC598 and VPX598 models offer quad ADC with sample rates of up to 3 GSPS at 14-bits and quad DAC at 16-bits with rates up to 12 GSPS. These models provide RF synthesis up to 6 GSPS and are suitable for COMINT/SIGINT, radar, research and instrumentation applications. Supported by three banks of DDR4 memory, these... Read More

Mechanical Components and Assemblies

40GbE Rugged 6-slot MicroTCA Chassis meet MIL-STD-901D standards.

Nov 03, 2017

VT953 Rugged MicroTCA Chassis can hold up to 6 advanced mezzanine cards. Units come with an integrated MCH with IEEE1588/SyncE/GPS capabilities. Products offer dual 40GbE to AMC slot and front panel. Chassis provide front-to-rear cooling option and feature input range of -36 to -75V, optional JTAG switch module, and virtual JTAG probe. VT953 meets 810G and MIL-STD-461F standards.

Read More

Computer Hardware & Peripherals

AMC580 Zynq UltraScale+ Module supports flexible clocking.

Oct 19, 2017

Allowing for large buffer sizes during processing, the AMC580 Zynq UltraScale+ Module's FPGA is equipped with an interface to a single DDR4 memory channel. Designed to excel in next-generation wired and 5G wireless infrastructure, the product offers 64GB of flash, 128MB of boot flash, a quad-core ARM processor, and specialized processing elements. 

Read More

Video Encoder/Decoder Modules are suitable for video intensive applications.

Oct 07, 2017

Video Encoder/Decoder Modules are available in AMC347, AMC350, AMC351 and AMC352 variants. Units are suitable for broadcast and surveillance applications. AMC347 is used to convert a display port input to RGsB. AMC350/AMC351 quad video encoders come with an ability to perform H.264, MPEG-4 and H.263 encoding up to Full-HD 1920x1080 @ 60 FPS. AMC352 comes with quad HDMI/DVI output and is used... Read More

FMC216 FPGA Mezzanine Card comes with SSMC connectors.

Sep 12, 2017

FMC216 FPGA Mezzanine Card offers 12-bit ADC conversion at rate of up to 2.6 GSPS and 14-bit DAC at a rate of up to 5.6 GSPS. Unit is compatible with Xilinx and Altera based FMC carriers. Product is suitable for communications systems, wireless infrastructure, LTE, ATE, and RADAR/jamming applications. FMC216 comes with analog input/output clock and trigger interfaces.

Read More

Double Module AMC features on-board managed switch.

Aug 25, 2017

AMC540 Double Module Advanced Mezzanine Card comes with Xilinx Virtex-7 XC7VX690T FPGA and dual multicore TI TMS320C667x digital signal processors. Unit’s DSPs are offered in TMS320C6670 or TMS320C6678 options which are connected by hyperlink. Featuring Virtex-7 FPGA, product is suitable for network, communications and particle physics applications. Module offers bandwidth (24 of 10G)... Read More

Test & Measuring Instruments

VT988 Data Acquisition Board features on-board JetsonTX2 module.

Aug 10, 2017

16-Channel VT988 Data Acquisition Board features Layer 2 managed Gigabit Ethernet switch that offers quad GbE through RJ-45 interfacing to the front panel. Board measures 1U height and 255 mm deep and can be used as desktop appliance or 19 in. rack-mount. Unit’s JetsonTX2 comes with an integrated 256-core NVIDIA Pascal™ GPU @ 1300MHz, a hex-core ARMv8 64-bit CPU complex and 8GB of LPDDR4... Read More

Computer Hardware & Peripherals

AMC597 Wideband Transceiver supports FDD and TDD operation.

Jul 01, 2017

Offering tunable frequency over 300MHz to 6GHz, AMC597 Wideband Transceiver consists of quad AD9371 RF transceivers coupled to Xilinx UltraScale Kintex XCKU115 with 20GB DDR4. Having 250MHz transmit/synthesis bandwidth and 100MHz receive bandwidth, unit is suitable for 3G/4G BTS equipment. Product comes with observation (to monitor tx output) and sniffer (to monitor other bands) receiver... Read More

Computer Hardware & Peripherals

UTC040C MicroTCA Carrier Hub comes with BaseT interface.

Jun 17, 2017

Consisting of PCIe Gen3 switch with 1024Gbps aggregate bandwidth, automatic speed negotiation, and virtual switch, UTC040C Conduction Cooled MicroTCA Carrier Hub is used for configuring JTAG Slave devices on AMC cards. Suitable for SWAP-constrained applications, hub allows for remote debugging without additional JTAG equipment. Unit comes with two/three GbE switch with 12 ports... Read More

Electrical Equipment & Systems

ATCA 40GbE Switches deliver switching throughput of 1.2 TBit.

Jun 05, 2017

ATCA 40GbE Switches are available in ATC804 and ATC803 models. ATC804 switch offers dual 100GbE high speed ports, 16 SFP+ and 8 RJ45 ports and supports SyncE and IEEE 1588 protocols. Featuring zQSFP+ (QSFP28), 8 ports to SFP+, 4 QSFP+ and 8 ports to RJ-45 ports, ATC803 switch comes with Layer 3 managed 40GbE switch that routes 13 ports to each Fabric and Base Channels and two ports to Update... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

HDMI/DVI H.264 Encoder is compatible with ISO/IEC 14496-2 standards.

May 13, 2017

Used for encoding full HD to H.264, MPEG-4 and H.263 with throughput up to 1920 x 1088 at 60 fps, AMC350 Quad HDMI/DVI H.264 Encoder is suitable for surveillance, broadcast, robotics, telemedicine and industrial applications. Unit’s encoded data can be accessed via PCIe or GbE backplane routing. Capable of encoding images as small as 96 x 16 pixels (W x H), encoder rate control is configured... Read More

AMC005 Time and Frequency Module supports Synchronous Ethernet.

Apr 26, 2017

Delivering clock, 1PPS, divided-down clocks, IRIG DCLS and time trigger outputs, AMC005 Time and Frequency Module is suitable for communication networks, sonar, bi-static radar and SIGINT applications. Offering GPS / PTP (1588) / IRIG / NTP bus-level timing solution, module provides precision UTC timestamps and GPS location/time/status. Featuring optional non-volatile storage of Almanac,... Read More

Test & Measuring Instruments

DAQ523 Data Acquisition System comes with twelve-channel ADC.

Apr 08, 2017

Suitable for laser detection in remote monitoring, frequency stabilization and lock-in amplifiers, DAQ523 Data Acquisition System is designed with 2 channels of DAC (MAX5878) coupled to Xilinx Kintex-7 XC7K410T FPGA. Featuring 1310 to 1650 nm optical detection range, unit provides 0.7W/A sensitivity for input power of 0 to 160uW. Equipped with user-customizable software framework, DAQ523... Read More

Test & Measuring Instruments

AMC599 and VPX599 ADC/DAC Modules feature Xilinx UltraScale XCKU115 FPGA.

Mar 28, 2017

Integrating dual 12-bit ADC at 6.4 GSPS and dual 16-bit DAC at 12 GSPS and 3 banks of DDR4 totaling 20GB, AMC599 and VPX599 ADC/DAC Modules are suitable for radar, jamming and SIGINT applications. Delivering 6 GSPS of signal conversion rate, units are equipped with DAQ Series software with DMA engine.

Read More

Material Handling & Storage

AdvancedMC FMC Carriers feature 16GB of 64-bit wide DDR-4.

Mar 15, 2017

Based on Altera Arria-10™ FPGAs, AMC535 and AMC536 AdvancedMC FMC Carriers are organized as two banks for high-speed data buffering. AMC535 uses the SX660 so it is SoC enabled with a dual-core ARM Cortex-A9 MPCore. AMC536 uses GX1150 to provide 1,150 thousand Les. Used with VadaTech’s range of signal conversion and network interface FMCs, both boards support multiple open standard form... Read More

Electronic Components & Devices, Test & Measuring Instruments

AMC902 IF Signal Conditioning Unit provides programmable gain.

Feb 25, 2017

Combined with MicroTCA sub-system for radar, SIGINT and data acquisition applications, AMC902 dual-channel IF Signal Conditioning Unit is controlled by using on-board management processor through base interface GbE or front-panel management port. Product can be used up to 15 GHz bandwidth and 56 GSPS. AMC902’s backplane is rooted with clock inputs via crossbar switch.

Read More

Mechanical Components and Assemblies

VT884 MicroTCA Chassis comes with customizable backplane.

Feb 13, 2017

Suitable for ASIC emulation, network processing, medical imaging and high-bandwidth applications, VT884 MicroTCA Chassis is designed with redundant power supplies, dual MCH, with power cooling units and air filters. Supporting tightly-coupled networks of FPGAs, unit features Virtex UltraScale™ XCVU440, PinoutPlus™ and 3U twelve slots.

Read More

Electronic Components & Devices

AMC596 FPGA Carrier supports VHDL.

Dec 19, 2016

Based on Virtex UltraScale™ XCVU440 FPGA, AMC596 FPGA module is suitable for ASIC emulation and sensor processing applications. Supported by 8GB of 64-bit wide DDR4 and on board power PC P2040, unit provides additional connectivity of over 250 Gbps between neighboring modules by PinoutPlus™.

Read More

Other Company News from