Vishay

P-Channel MOSFETs offer industry-low RDS(on).
Electrical Equipment & Systems

P-Channel MOSFETs offer industry-low RDS(on).

In applications where saving PCB space is critical, -12 V Model Si5411EDU offers low on-resistance of 8.2 mΩ (-4.5 V) and 11.7 mΩ (-2.5 V) in 3.0 x 1.9 mm PowerPAK ChipFET package. When higher voltage rating is needed, -20 V Model Si5415AEDU features values of 9.6 mΩ (-4.5 V) and 13.2 mΩ (-2.5 V). Both provide 5,000 V ESD protection. Model SiSS23DN, housed in 3.3 x 3.3 mm PowerPAK 1212-8S...

Read More »
Gesture Sensor Board streamlines touchless remote control.
Display & Presentation Equipment

Gesture Sensor Board streamlines touchless remote control.

Used to add touchless swipe right, swipe left, tap, and push in and out control to any device, gesture control sensor board consists of VCNL4020 integrated digital proximity and ambient light sensor and 2 VSMF2890RGX01 IR diodes mounted on either side of sensor. Radiant intensity of 80 mW/sr typ at 200 mA allows for detection of hand gestures up to 25 cm above sensor board, and proximity...

Read More »
Thin Film Chip Resistors deliver stable performance.

Thin Film Chip Resistors deliver stable performance.

In 0402 case size, MC professional and precision series offer respective resistance values down to 10 and 100 Ω for all TCR/tolerance combinations. In 0603 case size, professional series features resistance down to 1 Ω for TCRs of ±50 ppm/K and ± 25 ppm/K with a 0.5 % tolerance. While professional series combines dissipation at 70°C to 400 mW with operating range up to +155°C, precision...

Read More »
IR Emitting Diodes feature
Electronic Components & Devices

IR Emitting Diodes feature

Based on GaAIAs surface emitter chip technology, Model VSMY14940 offers radiant intensity to 82 mW/sr at 70 mA drive current, switching time of 10 ns, and forward voltage of 1.48 V. In applications where lower intensity is needed, Model VSMB14940 is built on GaAIAs multi-quantum well technology for radiant intensity of 35 mW/sr, switching time of 15 ns, and forward voltage of 1.33 V. Housed in...

Read More »
Wireless Charging Receiving Coil is WPC compliant.

Wireless Charging Receiving Coil is WPC compliant.

Optimized for use with or without alignment magnet, Vishay Dale IWAS-4832EC-50 Rx coil delivers efficiency >75% for wireless charging of 7 V portable electronics. High-saturation (50% of inductance at 4000 gauss) powdered iron is not affected by permanent locating magnets. With lead length of 50 mm and tinned length of 10 mm, Wireless Power Consortium-compliant coil features inductance of 16.2...

Read More »
Thin Film Chip Resistors withstand automotive applications.

Thin Film Chip Resistors withstand automotive applications.

Available in standard case sizes from 0402 to 1206, MC AT Professional Series Resistors combine high-temperature performance to +175°C with extended resistance range of 1 Ω to 1 MΩ, while Precision Series offers resistance values of 47 Ω to 1 MΩ with tolerances down to ±0.1%, and TCR down to ±10 ppm/K. AEC-Q200-qualified devices provide power rating of 400 mW at +85°C and +70°C,...

Read More »
Quad SPST CMOS Analog Switches offer 1.5 ohm low on-resistance.
Electrical Equipment & Systems

Quad SPST CMOS Analog Switches offer 1.5 ohm low on-resistance.

Vishay Siliconix DG1411, DG1412, and DG1413 are ±15 V precision monolithic quad SPST CMOS analog switches. With 100 nsec switching times, these bidirectional products feature 4 independently selectable SPST switches. Respective configurations for DG1411 and DG1412 are NC and NO, while DG1413 has 2 NO and 2 NC switches with break-before-make operation. Max on-resistance flatness is 0.48 Ω,...

Read More »
Wet Tantalum Capacitor is approved to DLA drawing 13017.
Electronic Components & Devices

Wet Tantalum Capacitor is approved to DLA drawing 13017.

Offered in axial T1, T2, T3, and T4 case sizes, 13017 tantalum-cased electrolytic capacitor has glass-to-tantalum hermetic seal and is optimized for aerospace and avionics equipment. Product combines reverse voltage of 1.5 V at +85°C with optimized vibration (sine: 50 g; random: 27.7 g) and thermal shock (300 cycles) capabilities. Along with voltage 25–125 V, features include capacitance from...

Read More »
Electrical Equipment & Systems

Vishay Intertechnology to Showcase Industry-Leading Passive Components at eCarTec Munich 2013

Latest Inductors, Resistors, and Thermal Fuses Provide High Reliability for Hybrid and Full Electric Vehicles MALVERN, Pa. — Vishay Intertechnology, Inc. (NYSE: VSH) today announced that it will be exhibiting its latest passive components in booth A6-507A at eCarTec Munich 2013, the world's largest trade fair for electric and hybrid mobility, being held at the Munich Trade Fair Centre from Oct....

Read More »
Thin Film Chip Resistor operates to +155

Thin Film Chip Resistor operates to +155

Offered in 0603 case size, PATT features resistance range from 2.75 Ω to 120 kΩ, absolute TCR as low as ±25 ppm/°C, and laser-trimmed tolerances down to ±0.1%. AEC-Q200-qualified unit operates at temperatures to +155°C with 100% power, derated linearly to 0 mW power at +250°C. With load-life stability of

Read More »

All Topics