Vishay

Inductor Series offers DCR values down to 1.5 milliohms.
Electronic Components & Devices

Inductor Series offers DCR values down to 1.5 milliohms.

Featuring 100% lead-free composite construction, IHLM-2525CZ-01 series is supplied in 0.255 x 0.270 x 0.118 in. package. Molded construction allows for protection against electrical shock and is resistant to moisture, salt, and chemicals. Operating over frequency range up to 5 MHz, series is specified for saturation currents from 7-60 A and for typ DCR values up to 102 milliohms. It suits voltage...

Read More »
SCSI Bus Terminators meet SCSI-1 to SPI-4 standards.
Construction Equipment and Supplies

SCSI Bus Terminators meet SCSI-1 to SPI-4 standards.

Available in 9-, 14-, and 15-line models, multi-mode Series SiP56xx is built on high-voltage, 0.8 micron BiCMOS process. Each output channel provides termination for one SCSI data signal, parity signal, or control signal. Termination provides impedance matching of SCSI bus to minimize signal reflections from end of bus, as well as required SCSI bus biasing for S/E or LVD operation. Units sense...

Read More »
Reflective Optical Sensor operates at distances up to 40 mm.
Sensors, Monitors & Transducers

Reflective Optical Sensor operates at distances up to 40 mm.

Surface-mount Model TCND5000 combines IR emitter as source and photodiode as receiver for touch/proximity signal. Optical axes of emitter and detector are parallel-aligned for optimized reflective operation. Emitter features operating wavelength of 950 nm, while 950 nm IR bandbass filter eliminates interference from daylight. Optical barrier between emitter and detector minimizes crosstalk....

Read More »
Clock Oscillators are rated for 1.8 and 2.5 V input voltages.
Electronic Components & Devices

Clock Oscillators are rated for 1.8 and 2.5 V input voltages.

Measuring 0.275 x 0.197 x 0.63 in., surface-mount Models XOSM-571 and XOSM-572 offer frequency range of 1-100 MHz with frequency stability options of ±25, ±50, and ±100 ppm. Tri-state enable/disable function contributes to efficient operation. Lead-free oscillators are HCMOS-compatible and compatible with IR re-flow processes. They are suited for portable computing and telecommunications...

Read More »
Inductors are packaged in 0402 and 0603 case sizes.
Electronic Components & Devices

Inductors are packaged in 0402 and 0603 case sizes.

Wirewound, surface-mount Model IMC-0402-01 offers SRF values from 2,100-6,000 MHz over inductance range of 1.0-47.0 nH with minimum Q factor from 26-13. Model IMC-0603-01 features SRF values from 1,000-6,900 MHz over inductance range of 2.0-270 nH, and minimum Q factor from 43-16. Rated DC current ranges from 150-1,360 mA for IMC-0402-01 and 170-700 mA for IMC-0603-01. With operating temperature...

Read More »
SMT Chip Resistor offers 300 mW rated power.
Electronic Components & Devices

SMT Chip Resistor offers 300 mW rated power.

Measuring 0.126 x 0.062 x 0.025 in., VSMP1206 Bulk Metal® Z-foil resistor combines 0.01% load life stability and ±0.5 ppm/°C nominal TCR in surface-mount package. Use of Z-foil reduces changes in resistance caused by current variation in power resistors and current-sensing resistors with low TCR and thermal resistance. Resistor features full wrap-around terminations, 10 W to 30 kW resistance...

Read More »
Inductors are specified for saturation currents up to 70 A.
Electronic Components & Devices

Inductors are specified for saturation currents up to 70 A.

High-Current Models IHLP-2525EZ-05 and IHLP-2525EZ-01 offer inductance ranges of 0.1-2.2 -µH and 3.3-10 µH, respectively. Units measure 0.255 x 0.270 in. with max height profile of 0.197 in. Both occupy standard 2525 footprint while providing typical DCR values from 0.81-53.3 mOhm. Packaged in 100% Pb-free, shielded composite housing, inductors handle high transient current spikes without...

Read More »
Load Cell provides weighing capabilities from 50-5000 kg.
Electrical Equipment & Systems

Load Cell provides weighing capabilities from 50-5000 kg.

Series 600 Tedea-Huntleigh S-type load cells include nickel-coated alloy steel and stainless steel variants. Models 615 and 616 suit harsh environments and frequent wash-down, and are sealed to IP66. Models 619 and 620 are rated to IP67 and IP68, respectively. Model 614, with aluminum body, is OIML-approved to 3000 divisions from 50-500 kg and is rated to IP65. Models 615 and 616 have 4/6-wire...

Read More »
Electrical Equipment & Systems

Load Cell offers nominal accuracy of

Tedea Huntleigh 3520 Shear Beam Load Cells suit low-profile floor scales and pallet scales. The 19 mm high load cells are constructed from stainless steel, making them easy to clean and corrosion resistant. Units are fully sealed to meet IP67 standards. High thermostability ensures accuracy throughout wide temperature fluctuations. Six-wire cable, with 2 sensing wires, eliminates measurement...

Read More »
ESD Protection Diodes provide working voltage of 1-12 V.
Electronic Components & Devices

ESD Protection Diodes provide working voltage of 1-12 V.

Featuring SOD523 package and measuring 0.8 x 1.6 x 0.6 mm, Series VESDxx-02V provides data line protection in portable electronics. Units offer one-line transient protection of 15 kV (air) and 8 kV (contact) as per IEC 61000-4-2. Devices are packaged in plastic case with UL 94 V-0 flammability rating and are specified for operating temperature range of -40 to +125°C. Maximum clamping voltage is...

Read More »

All Topics