Company News

Alliance Sensors Group

102 Commerce Dr. Unit 8, Moorestown, NJ, 08057, USA

  • 856-727-0250

Latest New Product News from
Alliance Sensors Group

Sensors Monitors & Transducers

Inductive Linear Position Sensors come with 1 m radial exit cable.

Oct 12, 2017

LZ-33 Series LVIT Inductive Linear Position Sensors are available in full scale ranging from 50 to 900 mm. Units are suitable for factory automation or assembly machinery applications and come in length of 38 mm. Products come with 33.4 mm OD aluminum or optional stainless steel body and 17 mm diameter through-bore. Sensors feature LVIT Technology™ and DC in / DC out operation. LZ-33 Series... Read More

Sensors Monitors & Transducers

LVIT Linear Position Sensors feature optional mounting hardware.

Sep 04, 2017

LV-45 Series LVIT Linear Position Sensors are available with optional mounting flanges, rod eye ends, axial or radial connector or cable terminations and a captive connecting rod assembly. Units are operated in a temperature range of -40°C to 85°C and come in a range from 100-450mm with various analog outputs. Products feature a ½-20 UNF externally threaded core rod and double shaft seals.... Read More

Sensors Monitors & Transducers

Linear Variable Inductive Transducer features four analog outputs.

Aug 09, 2017

Linear Variable Inductive Transducer is offered in three series such as LR-19 automation duty, LR-27 and LRL-27 industrial duty and LV-45 extreme duty. Units are available in ranges from 25 to 450 mm and are suitable for solar cell positioners, wind turbine prop pitch and brakes, chute or gate positioners on off-road or agri-vehicles applications. Products are operated without contact and... Read More

Sensors Monitors & Transducers

LA-27-A Linear Position Sensors feature heavy duty cable termination.

Jul 10, 2017

Suitable for applications such as factory automation, civil engineering, and fluid power systems, LA-27-A Series LVDT Linear Position Sensors are available from 75 mm to 375 mm range. Designed with 9.5 mm diameter extension rod with 5/16-24 or 8 mm male threaded end, sensors are housed in 26.7 mm diameter aluminum housing. Featuring two double-contact shaft seals, units are operated up to... Read More

HVAC, Test & Measuring Instruments

CHT-FS Series Sensors feature flexible stem design.

May 24, 2017

Suitable for UAVs, light aircraft, power generators and motorsports applications, CHT-FS Series Cylinder Head Temperature Sensors are installed under spark plug or head bolt. Available for 10, 12, 14, or 18 mm OD bolts/spark plugs, units are operated in -40°C to +1000°C temperature range. Used for monitoring engine performance and critical over-temperature conditions, sensor’s stem design... Read More

Electronic Components & Devices, Test & Measuring Instruments

SC-100 Signal Conditioners are self-diagnostic to LVDT winding failures.

Apr 10, 2017

Featuring 2.5, 5.0, 7.5, and 10.0 KHz excitation frequencies and 0-5, 0-10, ±10, 0.5 - 4.5, 1-5, 0.5- 9.5 VDC analog outputs, SC-100 Signal Conditioners work with LVDTs, RVDTs and inductive half-bridge position sensors. Providing 4-20 mA or 0-20 mA current loop DC outputs and 15-30 VDC power input options, units come with front panel push buttons for easy calibration. Conditioners are... Read More

Sensors Monitors & Transducers

LA-25-R LVDT Linear Position Sensor comes with IEC IP-68 rated seal.

Mar 30, 2017

Available with axial connector or cable versions, LA-25-R LVDT Linear Position Sensors feature flanges, single hole mounting kits, swivel rod eye ends and ball joints. Suitable for roller gap positioning, process valve displacement and head box and actuator position feedback, units are designed in 75 mm to 375 mm full scale. Sensors are housed in 3/8 in. diameter core extension rod with... Read More

Electronic Components & Devices, Test & Measuring Instruments

SC-100 AC-LVDT Signal Conditioner features front panel pushbuttons.

Feb 23, 2017

Offering 2.5, 5.0, 7.5, and 10.0 KHz of excitation frequencies, SC-100 AC-LVDT Signal Conditioner features RS-485 digital communication port. Designed with 0 -5, 0 -10, +/-10, 0.5 - 4.5, 1- 5, 0.5 - 9.5 VDC analog DC outputs and 4-20 mA or 0-20 mA current loop DC outputs, unit’s internal microprocessor eliminates need for calculating jumper settings of gain and range. Unit comes with 15-30 V... Read More

Sensors Monitors & Transducers

LV-45 Linear Position Sensor features SenSet technology.

Dec 19, 2016

Operating in -40°C to 85°C temperature range, LV-45 Linear Position Sensor is specifically designed for measuring applications requiring rugged devices. Ranging from 100 mm - 450 mm with various analog outputs, unit measures 44.5 mm outer diameter body with 5 mm wall thickness. Including Axial or radial connector or cable terminations, LV-45 provides optional mounting hardware and comes with... Read More

Sensors Monitors & Transducers

LZ-25 Series Position Sensor eliminates mechanical overstroking damage.

Dec 08, 2016

Designed for use in factory automation or assembly machinery applications, LZ-25 Series LVIT Inductive Linear Position Sensors are offered in full scale ranges of 50 to 900 mm. With overall length measuring 38 mm, sensor has 25.4 mm outside diameter and comes with aluminum or stainless steel body. Featuring 1-m long radial exit cable for I/O connections, LZ-25 with 7.5 mm diameter through bore... Read More

Sensors Monitors & Transducers

LVIT Inductive Linear Sensors feature SenSet Field Adjustable Scaling.

Nov 21, 2016

Available in 1 inch to 24 inch measurement ranges with analog DC voltage or current output, LVIT Inductive Linear Sensors offer ±0.1% of Full Scale Output linearity error and -3dB frequency response of 300 Hz. Housed in IEC IP-67 aluminum or stainless steel, units operate in 5000 psi or 10,000 feet depth and at 85°C temperature. Being contactless, sensors are offered in 4-pin M-12 or 5-pin... Read More

Electronic Components & Devices, Test & Measuring Instruments

S1A AC-LVDT Signal Conditioner has self-diagnostics.

Nov 13, 2016

Offering 4 excitation frequencies, 8 analog DC outputs and RS-485 port, S1A AC-LVDT Signal Conditioner provides speedy LVDT setup with built-in null indication. S1A is compatible with AC-LVDTs, RVDTs and inductive half-bridge sensors including 3-wire GE LVRTs and GE gas turbine LVDTs. Unit is fully calibrated with the position sensor. S1A is programmed to detect output errors and drive analog... Read More

Sensors Monitors & Transducers

Inductive Linear Sensors operate in subsea environments.

Oct 19, 2016

Intended for oil and gas exploration, SS-7 Series Linear Variable Inductive Transducers are designed to be embedded into hydraulic cylinder and utilize gun-drilled piston rod as target, sensing its position without need for magnet. Contactless units offer measurement ranges from 1–24 in. and operation to 5,200 psi or 12,000 ft. deep. Supplied in 25 mm diameter stainless steel housing, sensors... Read More

Sensors Monitors & Transducers

Spring Loaded LVIT extends use with contactless operation.

Sep 30, 2016

With 0.5–4.0 in. ranges, LRS-18 series serves dimension or position measuring applications in factory automation and various industrial/commercial applications where sensing element cannot be attached to object being measured. Sensors use 0.25 in. dia probe equipped with AGD No. 9 contact tip and are offered with axial cable or connector. Along with choice of 4 analog outputs,... Read More

Sensors Monitors & Transducers

LVIT Inductive Linear Position Sensors have heavy-duty design.

Sep 27, 2016

Operating from DC voltages, long-stroke LRL-27 Series offers choice of 4 analog outputs, SenSet™ field scalability feature, and 5 nominal ranges from 10–18 in. Contactless operation prevents wearout from dither or cycling, and 1.05 in. dia anodized aluminum housing is sealed to IP67. Along with LVIT (Linear Variable Inductance Transducer) Technology™, features include radial cable... Read More

Sensors Monitors & Transducers

Spring-Loaded LVIT Gaging Sensors have drop-in replacement design.

Sep 13, 2016

Designed for dimensional gaging and position measurements, GHS-19 series has 0.75 in. dia aluminum or stainless steel body with 1/2-20 mounting thread. Stroke-to-length ratio minimizes housing length, FS ranges are available from 0.5–4.0 in., and max tip force is 1 lb. Operating from various DC voltages, contactless sensors are available with choice of one of four analog outputs and... Read More

Sensors Monitors & Transducers

Linear Position Sensors offer four analog outputs and SenSet(TM) field recalibration.

Aug 19, 2016

Designed for factory automation and other commercial applications, LR-19 Series Inductive Linear Position Sensors uses LVIT Technology. Presented in sizes 25 to 200 mm (1 to 8 inches), sensor’s contactless operation prevents wear out. Placed in a 19 mm (0.75 inch) diameter anodized aluminum housing sealed to IP-67, LR-19 series is available with axial cable or connector terminations, or with... Read More

Sensors Monitors & Transducers

Linear Position Sensors feature magnet-free design.

Jun 02, 2016

ME (embedded) , MR (port-mount), MHP (port mount 25 mm hex housing), and SS-7 (subsea port-mount) Series, used to measure ram position of hydraulic and pneumatic cylinders, fit into gun-drilled cylinder and operate up to 85°C. Along with 1–24 in. measurement ranges, contactless products feature IEC IP67 aluminum or stainless steel housing, DC voltage or current analog output, and... Read More

Mechanical Power Transmission, Sensors Monitors & Transducers

Inductive Linear Position Sensors suit factory automation.

May 10, 2016

Featuring contactless operation, Model LR-27 has 6 ranges from 1–8 in., while Model LRL-27 has 5 ranges from 10–18 in. Units feature 1.05 in. diameter anodized aluminum housing sealed to IP67. Radial cable exit version comes with swivel rod eye ends, while axial termination versions utilize M-12 connector or 1 m cable. Operating from variety of DC voltages with choice of 4 analog outputs,... Read More

Sensors Monitors & Transducers

Contactless LVIT Position Sensors have through-bore design.

Mar 18, 2016

Designed for use in factory automation or assembly machinery applications and external mounting on hydraulic cylinders to sense rod position, LZ-25 Series uses LVIT Technology™ and comes in nominal FS ranges from 2–36 in. Overall length is ~1.5 in. longer than linear range of unit, and 1 in. OD aluminum or stainless steel body has 1 m long radial exit cable. In addition to negating... Read More

Other Company News from
Alliance Sensors Group