Bosch Rexroth Corp.
Burlington, ON L7M1A8 CAN
New CD ROM from Rexroth Offers Solid Models on CD for all Major CAD Systems
BUCHANAN, MI - A new 2-disk CD ROM from Rexroth has just been released, featuring all 3D solid models the company has developed over the last two years. Developed with 3D Partstream technology, a division of SolidWorks, the new models have only been available on-line in the 3D CAD Library at www.boschrexroth-us.com/brlcad and www.3DContentCentral.com. The new CD offers the same convenient on-line...
Read More »New Solid Models for TSPlus and TS4Plus Conveyors from Bosch Rexroth
BUCHANAN, MI - Bosch Rexroth has added 3D solid models for TSplus and TS4plus conveyor systems to their web site at www.boschrexroth-us.com/brlcad. The new models can be downloaded in virtually any native solid model or CAD format in 3D or 2D to provide unprecedented design accuracy and efficiency. System integrators and in-house manufacturing personnel are likely to benefit most from the new...
Read More »
Motion Control System is intended for roll feed operations.
IndraMotion for Metal Forming contains all pre-defined, user-activated functions needed for specific applications such as roll feed and flying cut off. While offered in 3 versions, all are built on IEC 61131-3 compliant PLC running in IndraDrive and use open interface technology for discrete I/O and standard fieldbus protocols. Each version also lets users utilize technology functions offered by...
Read More »Plug-In Pneumatic Valves have integrated AS-i connection.
Suited for AS-i serial link applications, 2-station Series CA44 valves are offered with manifold choices with or without digital inputs and with or without auxiliary power. Design simultaneously makes both electrical and pneumatic connections when plugging valve into place. Valve stations can be 4-way, 2-position valves; dual 3-way, 2-position valves; or blanking plate. Service life is over 100...
Read More »
Miniature Ball Rails come in lengths up to 2,000 mm.
With constant speeds to 3 m/s and accelerations to 250 m/s-², single-piece, miniature Ball Rail-® Systems are available in 7, 9, 12, 15, and 20 standard sizes as well as 9, 12, and 15 wide sizes. Models 9 mm and up include stainless steel cover strips. All steel parts are corrosion- and acid-resistant, making them suited for sensitive applications such as wafer handling equipment, medical...
Read More »
Quiet Pump Expands Rexroth Line of Reduced-Noise Hydraulics
The A10VSO Series 32 is quieter and reduces pressure pulsation A10VSO Series 32 axial piston pump complements the Rexroth family of quiet hydraulic power units and valves. (Bethlehem, PA - www.boschrexroth-us.com) The A10VSO Series 32 medium-pressure axial piston pump from Bosch Rexroth is specifically made to help reduce noise in stationary hydraulic systems. The A10VSO Series 32 pump was...
Read More »
Drive/Control System features integrated design.
With IndraDrive Mi, motor casing serves as heat sink for servo/control system, which is attached to long axis of motor, adding only small amount to cross sectional profile. Single cable carries both power and SERCOS communications, and all connections, as well as IndraDrive Mi itself, are rated to protection class IP65. Servo drives have over 100 technology functions, including integrated Motion...
Read More »Air Preparation Units offer modular, customizable design.
Featuring die-cast zinc body, Series NL1 Mini FRLs offer transparent polycarbonate and solid metal bowls, and choice of 1/8 or -¼ in. NPT ports. Units provide filtration choices of 5, 0.3, or 0.01 micron with carbon filters for odor and vapor removal. Filter drain options include semi-automatic, float drain - normally closed, and float drain with overnight function. Regulators come in single and...
Read More »
Linear Guide System provides max speed of 375 mm/s.
Measuring 40 x 20 mm, PSK 40 Precision Module features max length of 350 mm and incorporates 6 mm diameter ball screw with option for 1 or 2 mm lead. Ball screw is manufactured to tolerance class 7 with preloaded ball nut. Ball tracks are machined into precision steel base, which includes machined reference edge. PSK40 is suitable for medical, semiconductor, and small machining applications,...
Read More »
Cartesian Motion System is used in mutli-axis applications.
CMS Cartesian Motion System with IndraMotion speeds programming and commissioning point-to-point and assembly applications. CMS handles payloads up to 25 kg, speeds up to 1.0 m/s, and acceleration rates up to 15 m/s-². PLC-based motion controller and VCP 08.2 HMI controller interface provide controls for Cartesian gantries with up to 3 linear axes (X, Y, Z) and 3 rotary axes (A, B, C). System...
Read More »