Steute Industrial Controls, Inc.
Suite 102
Ridgefield, CT 06877
Share:

Series ES 98/EM 98 from Steute Monitor Opening of Machine Guard/Access Door
Series ES 98/EM 98 switching systems feature positive-break NC contacts, silver contact material, glass-fiber reinforced thermoplastic hosing, screw terminal connections, and ingress protection rating of IP66, IP67, and IP69K. Operating at -20°C to +90°C, the system is rugged and is resistant to corrosion. Certified by cCSAus and compliant with EN ISO 13489-1, it has a mechanical life of over 1...
Read More »
Command Switches are integrated with a pushbutton actuator.
Available for operation at 915 MHz or 868 MHz, Wireless and battery-less Command Switches provide transmission range of 195 ft indoors and 2,297 ft free air. Units are operated in a temperature range of -20° C to +65° C and are offered in SW915 MHz and SW868 MHz models. Products feature pushbuttons with six color plates and internal electrodynamic energy generator. Switches come with...
Read More »
Wireless Foot Switch comes with metal protection shield.
With maximum nominal transmission range of 15 m, Wireless Foot Switches send highly-noise immune wireless signals to matched receivers. Device can be easily set up via programming push buttons at receiver. Powered with rechargeable lithium battery, unit comes in one or two pedal designs. Providing bidirectional communications over 32 channels in 2.4 GHz frequency band, unit meets IEC 62061 SIL...
Read More »Wireless Switches performs high/ low level detection.
Suitable for start/stop control, presence/position sensing, counting, alarm signaling, high/low level detection, wireless switches generate and receive “on/off” signals. Wireless switches help in developing robust, reliable digital switches and sensors.
Read More »
Foot Switches feature explosion protected design.
Certified for use in Zone 1 and Zone 21 environments, ATEX/IEC Ex-rated Foot Switches are available with positive-break contacts and offer mechanical life expectancy in excess of 1 million operations. Each features IP65-rated metal housing and carries cCSAus-listing. Available with optional foot rest and carrying handle, switches are suitable for safety guarding applications or those requiring...
Read More »
Coded-Magnet Sensors withstand extreme environments.
Featuring corrosion-resistant, stainless steel design with IP69K rating, RC Si Series withstands high-pressure/high-temperature wash downs. Non-contact, coded-magnet actuator supports switching distances up to 8 mm. For explosive environments, ATEX/IEC Ex-rated Zone 1 and Zone 21 versions are also available. Typical applications include valve monitoring, food processing, mining, fuel handling,...
Read More »
IP66-Rated Command Stations carry IEC Ex and ATEX ratings.
Command Station Series, intended for extreme environments, feature corrosion-resistant housings that accommodate one, 2, or 3 actuators, which may be pushbuttons, key-operated switches, selector switches, or- E-Stops. Products are available for use in -50 to +60°C environments as well as ATEX/IEC Ex-rated Zone 1 and Zone 21 explosive environments. Typical applications include, food processing,...
Read More »
Safety Interlock Switches carry ATEX and IEC Ex ratings.
Suited for use in Ex Zones 1/21 and Zones 2/22, Series Ex STM295 solenoid-latching, keyed safety interlock switches feature 2 NO and 2 NC contacts and are available in power-to-lock as well as spring-to-lock designs. These c CSA us-certified, IEC Ex- and ATEX-rated switches, when used with safety relay module, satisfy Performance Level e (EN ISO 13849) and SIL 3 (per EN 61508). Life expectancy...
Read More »
Emergency Pull-Wire Switches carry IP69K and IEC Ex ratings.
Suited for emergency-stop applications in corrosive environments, ZS71 and ZS91 Series are designed to withstand high-pressure/high-temperature washdowns (IP69K) and come in engineered plastic housing with stainless steel screws. IP67-rated ZS80 Series features integral E-Stop button, allowing optional E-Stop operation directly at switch. Each Series is also available for ATEX/IEC Ex-rated Zone 1...
Read More »
Series ES 98/EM 98 from Steute Monitor Opening of Machine Guard/Access Door
Series ES 98/EM 98 switching systems feature positive-break NC contacts, silver contact material, glass-fiber reinforced thermoplastic hosing, screw terminal connections, and ingress protection rating of IP66, IP67, and IP69K. Operating at -20°C to +90°C, the system is rugged and is resistant to corrosion. Certified by cCSAus and compliant with EN ISO 13489-1, it has a mechanical life of over 1...
Read More »
Command Switches are integrated with a pushbutton actuator.
Available for operation at 915 MHz or 868 MHz, Wireless and battery-less Command Switches provide transmission range of 195 ft indoors and 2,297 ft free air. Units are operated in a temperature range of -20° C to +65° C and are offered in SW915 MHz and SW868 MHz models. Products feature pushbuttons with six color plates and internal electrodynamic energy generator. Switches come with...
Read More »
Wireless Foot Switch comes with metal protection shield.
With maximum nominal transmission range of 15 m, Wireless Foot Switches send highly-noise immune wireless signals to matched receivers. Device can be easily set up via programming push buttons at receiver. Powered with rechargeable lithium battery, unit comes in one or two pedal designs. Providing bidirectional communications over 32 channels in 2.4 GHz frequency band, unit meets IEC 62061 SIL...
Read More »Wireless Switches performs high/ low level detection.
Suitable for start/stop control, presence/position sensing, counting, alarm signaling, high/low level detection, wireless switches generate and receive “on/off” signals. Wireless switches help in developing robust, reliable digital switches and sensors.
Read More »
Foot Switches feature explosion protected design.
Certified for use in Zone 1 and Zone 21 environments, ATEX/IEC Ex-rated Foot Switches are available with positive-break contacts and offer mechanical life expectancy in excess of 1 million operations. Each features IP65-rated metal housing and carries cCSAus-listing. Available with optional foot rest and carrying handle, switches are suitable for safety guarding applications or those requiring...
Read More »
Coded-Magnet Sensors withstand extreme environments.
Featuring corrosion-resistant, stainless steel design with IP69K rating, RC Si Series withstands high-pressure/high-temperature wash downs. Non-contact, coded-magnet actuator supports switching distances up to 8 mm. For explosive environments, ATEX/IEC Ex-rated Zone 1 and Zone 21 versions are also available. Typical applications include valve monitoring, food processing, mining, fuel handling,...
Read More »
IP66-Rated Command Stations carry IEC Ex and ATEX ratings.
Command Station Series, intended for extreme environments, feature corrosion-resistant housings that accommodate one, 2, or 3 actuators, which may be pushbuttons, key-operated switches, selector switches, or- E-Stops. Products are available for use in -50 to +60°C environments as well as ATEX/IEC Ex-rated Zone 1 and Zone 21 explosive environments. Typical applications include, food processing,...
Read More »
Safety Interlock Switches carry ATEX and IEC Ex ratings.
Suited for use in Ex Zones 1/21 and Zones 2/22, Series Ex STM295 solenoid-latching, keyed safety interlock switches feature 2 NO and 2 NC contacts and are available in power-to-lock as well as spring-to-lock designs. These c CSA us-certified, IEC Ex- and ATEX-rated switches, when used with safety relay module, satisfy Performance Level e (EN ISO 13849) and SIL 3 (per EN 61508). Life expectancy...
Read More »
Emergency Pull-Wire Switches carry IP69K and IEC Ex ratings.
Suited for emergency-stop applications in corrosive environments, ZS71 and ZS91 Series are designed to withstand high-pressure/high-temperature washdowns (IP69K) and come in engineered plastic housing with stainless steel screws. IP67-rated ZS80 Series features integral E-Stop button, allowing optional E-Stop operation directly at switch. Each Series is also available for ATEX/IEC Ex-rated Zone 1...
Read More »