ETEL, Inc.

DXR+ Rotary Module features toothless ring design.
Controls & Controllers

DXR+ Rotary Module features toothless ring design.

Suitable for electronic and semiconductor applications, DXR+ Rotary Module provides ±2 arc sec bidirectional repeatability, ±0.2 arc sec position stability and ±3 arc sec position accuracy after calibration. Offering unlimited angular travel, unit comes with Numerik Jena RIK4 encoder and cross-roller bearing for high moment load capacity and stiffness. Product features light mass, compact...

Read More »
LMG and LMS Linear Motors offer speed up to 10m/s.
Electrical Equipment & Systems

LMG and LMS Linear Motors offer speed up to 10m/s.

Minimizing amount of force ripple, LMG and LMS Linear Ironcore Motors are fully pin-to-pin compatible. Motors uses single magnetic track and are operated with 600 V supply. Delivering up to 908N continuous force and 3640N peak force, motors feature compact design and offer no backlash. Suitable for direct drive applications, LMG and LMS motors are compatible with 50, 70 and 100mm track widths.

Read More »
AccurET VHP Controller features High Speed Encoder Interfaced TTL.
Agricultural & Farming Products

AccurET VHP Controller features High Speed Encoder Interfaced TTL.

Minimizing errors and settling time, AccurET VHP Controller allows user to reach sub nanometer position stability and 100dB signal to noise ratio. Featuring high position loop bandwidth, unit allows compensation for friction, viscosity and cogging. Operating at 48 VDC and 1.5 Cont./3 Peak Arms to 7 Cont./30 Peak Arm current value, product is used in process control, wafer inspection, lithography,...

Read More »
Torque Motors target direct drive applications.
Electrical Equipment & Systems

Torque Motors target direct drive applications.

With 200 mm active length for each diameter, TMB+ series includes 62 standard model sizes with four different windings each. These motors, compatible with most CNC controllers, achieve peak torque of up to 42,900 Nm and utilize flux weakening to increase speed capabilities. Optional IMTHP thermal module provides users with precise and reliable temperature monitoring, while no backlash...

Read More »
Solar Impulse 2 Finishes Flight with ETEL's Proud Assistance
Electrical Equipment & Systems

Solar Impulse 2 Finishes Flight with ETEL's Proud Assistance

SCHAUMBURG, IL –Â-  Recently the Solar Impulse 2 airplane finished its flight around the globe, with airtime lasting over 500 hours and is the first plane to do so relying entirely on Solar Energy.  With an ETEL motor inside, the Solar Impulse 2 successfully started in Abu Dhabi and flew across Asia, the Pacific Ocean, the United States, Atlantic Ocean, and Europe before heading...

Read More »
Motion System delivers dynamics, repeatability, stability.
Agricultural & Farming Products

Motion System delivers dynamics, repeatability, stability.

With VULCANO XY as part of it is 3-piece-design stacked system, XYZ3TH consists of mechanical bearing-based platform integrating iron core linear motors. Stage is configurable and can be outfitted with module (theta, ZTheta, ZThetaTip Tilt) suited to application. Mechanical bearings provide stiffness in XY plane as well as vertically, allowing accelerations up to 2.5 g, speeds up to 2 m/s,...

Read More »
Indexing Tables provide high positioning accuracy.
Communication Systems & Equipment

Indexing Tables provide high positioning accuracy.

Offered in 5 active lengths, RTMBi Indexing Tables provide peak torque of 197 Nm, continuous torque to 36.4 Nm, and top speeds of 1,200 rpm. All have 166 mm OD and 25 mm hollow shaft. Tables feature ±20 arcsec accuracy, ±2 arcsec unidirectional repeatability, and bi-directional repeatability of ±3 arcsec. Alone or coupled with force controlled short stroke actuators and AccurET...

Read More »
Thermal Module ensures motor protection.
Communication Systems & Equipment

Thermal Module ensures motor protection.

Serving as accessory to ETEL's torque motors, IMTHP Thermal Module provides absolute motor protection from overheating. While monitoring readings from 3 KTY thermistors, unit uses built-in algorithm to detect any steady increase in KTY sensor output. IMTHP provides corrected analog temperature signal, allowing precise and continuous monitoring of actual temperature in motor. It also outputs...

Read More »
ETEL Presents Force Control
Agricultural & Farming Products

ETEL Presents Force Control

Schaumburg, Illinois – ETEL's motion control solutions, offered in North America through HEIDENHAIN Corporation, have been integrated into leading edge machines of various high-tech industries for more than 15 years.Â-  As applications and machines evolve, the specifications and features required to control these machines also change.  To keep up with changing demands, ETEL is...

Read More »
DXR+ Rotary Module features toothless ring design.
Controls & Controllers

DXR+ Rotary Module features toothless ring design.

Suitable for electronic and semiconductor applications, DXR+ Rotary Module provides ±2 arc sec bidirectional repeatability, ±0.2 arc sec position stability and ±3 arc sec position accuracy after calibration. Offering unlimited angular travel, unit comes with Numerik Jena RIK4 encoder and cross-roller bearing for high moment load capacity and stiffness. Product features light mass, compact...

Read More »
LMG and LMS Linear Motors offer speed up to 10m/s.
Electrical Equipment & Systems

LMG and LMS Linear Motors offer speed up to 10m/s.

Minimizing amount of force ripple, LMG and LMS Linear Ironcore Motors are fully pin-to-pin compatible. Motors uses single magnetic track and are operated with 600 V supply. Delivering up to 908N continuous force and 3640N peak force, motors feature compact design and offer no backlash. Suitable for direct drive applications, LMG and LMS motors are compatible with 50, 70 and 100mm track widths.

Read More »
AccurET VHP Controller features High Speed Encoder Interfaced TTL.
Agricultural & Farming Products

AccurET VHP Controller features High Speed Encoder Interfaced TTL.

Minimizing errors and settling time, AccurET VHP Controller allows user to reach sub nanometer position stability and 100dB signal to noise ratio. Featuring high position loop bandwidth, unit allows compensation for friction, viscosity and cogging. Operating at 48 VDC and 1.5 Cont./3 Peak Arms to 7 Cont./30 Peak Arm current value, product is used in process control, wafer inspection, lithography,...

Read More »
Torque Motors target direct drive applications.
Electrical Equipment & Systems

Torque Motors target direct drive applications.

With 200 mm active length for each diameter, TMB+ series includes 62 standard model sizes with four different windings each. These motors, compatible with most CNC controllers, achieve peak torque of up to 42,900 Nm and utilize flux weakening to increase speed capabilities. Optional IMTHP thermal module provides users with precise and reliable temperature monitoring, while no backlash...

Read More »
Solar Impulse 2 Finishes Flight with ETEL's Proud Assistance
Electrical Equipment & Systems

Solar Impulse 2 Finishes Flight with ETEL's Proud Assistance

SCHAUMBURG, IL –Â-  Recently the Solar Impulse 2 airplane finished its flight around the globe, with airtime lasting over 500 hours and is the first plane to do so relying entirely on Solar Energy.  With an ETEL motor inside, the Solar Impulse 2 successfully started in Abu Dhabi and flew across Asia, the Pacific Ocean, the United States, Atlantic Ocean, and Europe before heading...

Read More »
Motion System delivers dynamics, repeatability, stability.
Agricultural & Farming Products

Motion System delivers dynamics, repeatability, stability.

With VULCANO XY as part of it is 3-piece-design stacked system, XYZ3TH consists of mechanical bearing-based platform integrating iron core linear motors. Stage is configurable and can be outfitted with module (theta, ZTheta, ZThetaTip Tilt) suited to application. Mechanical bearings provide stiffness in XY plane as well as vertically, allowing accelerations up to 2.5 g, speeds up to 2 m/s,...

Read More »
Indexing Tables provide high positioning accuracy.
Communication Systems & Equipment

Indexing Tables provide high positioning accuracy.

Offered in 5 active lengths, RTMBi Indexing Tables provide peak torque of 197 Nm, continuous torque to 36.4 Nm, and top speeds of 1,200 rpm. All have 166 mm OD and 25 mm hollow shaft. Tables feature ±20 arcsec accuracy, ±2 arcsec unidirectional repeatability, and bi-directional repeatability of ±3 arcsec. Alone or coupled with force controlled short stroke actuators and AccurET...

Read More »
Thermal Module ensures motor protection.
Communication Systems & Equipment

Thermal Module ensures motor protection.

Serving as accessory to ETEL's torque motors, IMTHP Thermal Module provides absolute motor protection from overheating. While monitoring readings from 3 KTY thermistors, unit uses built-in algorithm to detect any steady increase in KTY sensor output. IMTHP provides corrected analog temperature signal, allowing precise and continuous monitoring of actual temperature in motor. It also outputs...

Read More »
ETEL Presents Force Control
Agricultural & Farming Products

ETEL Presents Force Control

Schaumburg, Illinois – ETEL's motion control solutions, offered in North America through HEIDENHAIN Corporation, have been integrated into leading edge machines of various high-tech industries for more than 15 years.Â-  As applications and machines evolve, the specifications and features required to control these machines also change.  To keep up with changing demands, ETEL is...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers