Pixus Technologies

Instrument Enclosures offer range of front panel/door options.
Architectural & Civil Engineering Products

Instrument Enclosures offer range of front panel/door options.

Available in 1U–4U sizes with several depths, widths, and configurations, modular Vario and RiPac Enclosures offer front doors with right, left, or bottom hinges, nearly all with lockable security option. Glass door for aluminum and sheet metal enclosure cases comes in smoked acrylic finish.Â- Rear filler panels/doors also come in various options, including versions with cutouts for 120 mm...

Read More »
AdvancedTCA Chassis (13U) offers backplane and PEM options.
Computer Hardware & Peripherals

AdvancedTCA Chassis (13U) offers backplane and PEM options.

Along with 40GbE backplane options to IEEE 40GBASE-KR4, PXS13X0 series AdvancedTCA (ATCA) chassis supports shelf manager options from VadaTech (VT003) and PigeonPoint (ShMM-700R). RiCool III fans options enable cooling ofÂ- over 300 W/slot while maintaining NEBS compliance and CPTA design guidelines. Also available, Power Entry Module (PEM) options include 100 A PEMs that have feeds limited...

Read More »
Double Rail Extrusions create rugged subracks.
Architectural & Civil Engineering Products

Double Rail Extrusions create rugged subracks.

Tested in railway applications for resistance to shock/vibration and ability to handle extreme loads, double rail extrusions with dual mounting provide modular framework for electronics enclosures. Mounting holes forÂ- second screw promote stability and strength for modular enclosure. Offered in front and rear versions and with various interfaces, extruded...

Read More »
OpenVPX Backplanes come in 3U and 6U configurations.
Electronic Components & Devices

OpenVPX Backplanes come in 3U and 6U configurations.

Compliant to VITA 65 specification, standard profile configurations for OpenVPX backplanes include 5-, 9-, and 18-slot 3UÂ- versions as well as 2- and 5-slot 6U versions. Each is available with or without rear I/O connectors and designed to cable over to Pixus power boards for VITA 62 or PICMG 2.11 power supplies. Header options are available for VITA 46.11 for system...

Read More »
NEBS-Compliant 15U ATCA Chassis exceeds 400 W/slot capability.
Computer Hardware & Peripherals

NEBS-Compliant 15U ATCA Chassis exceeds 400 W/slot capability.

Leveraging Kaparel design and reverse impeller hot-plug cartridges, 15U AdvancedTCA (ATCA) chassis provides at least 400 W/slot cooling capability while meeting all compliance criteria and recommended practices. Design meets NEBS requirements, includingÂ- ability to cool chassis with fan tray removed for 2 min, and remains within FCC acoustic requirements. Both 40 and 10 GbE...

Read More »
Power Interface Boards support VITA 62 power supplies.
Architectural & Civil Engineering Products

Power Interface Boards support VITA 62 power supplies.

Available in 3U and 6U heights in either single or dual PSU formats, Pixus VITA 62 Power Interface Boards feature header for voltage sense and IPMB for VITA 46.11 system management or other IPMI-based options. Units have several power bugs for 3.3, 5, and 12 V power as well as 26-pin header that accommodates general purpose I/O signals from PSUs. To optimize chassis cooling, breakaway tabs at...

Read More »
Modular 4U Chassis supports OpenVPX applications.
Computer Hardware & Peripherals

Modular 4U Chassis supports OpenVPX applications.

Available with various options to adapt to application, VPX4V180 Series includes base chassis that is suited for 3–18 medium powered OpenVPX boards. For higher power applications, larger bottom-to-top cooling fans can be used as well as air baffles. For front-to-rear cooling, 5U chassis is available. VPX4V180 Series includes EMC options with integrated components and supplemental gasketing....

Read More »
Instrument Cases and Enclosures come in customized versions.
Architectural & Civil Engineering Products

Instrument Cases and Enclosures come in customized versions.

Made of aluminum and sheet metal, Rittal Brand Instrument Cases and EnclosuresÂ- are available in 19, 16.8, 9.5, and 8.4 in. widths and 1U and 8U heights. Units feature mounting rails, grounding kits, carry handles, keyboard lids, and feet. Customization is available for covers, doors, enclosure depths, and other specialty requirements. Custom silk-screening, powder coating, and...

Read More »
Ejector Handles and Panels are available for 3U and 6U VPX boards.
Architectural & Civil Engineering Products

Ejector Handles and Panels are available for 3U and 6U VPX boards.

Pixus Type IV IEEE hot-swap ejector handles can engage over 225 lb of force per slot. Rounded base allows handle to rock back and provide leverage for facilitated insertion/removal of VPX boards. Front panels in 0.8 in., 1.0 in., and custom widths and 3U/6U heights are available in flat or Uchannel versions for EMC. These 2.5 mm aluminum panels come in anodized or clear chromate finishes, and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers