Stay up to date on industry news and trends, product announcements and the latest innovations.
Latest New Product News from
Seika Machinery, Inc.
Featuring CCD camera, SAM-CT34NJW Twin Table PCB Router can accommodate two boards up to 200 x 250mm. Offering cut paths of 0.5mm, unit’s software comes with point-and-click operation. Ability to cut populated PCBs, product is suitable for depanelization applications. Router’s camera provides QR code reading.Read More
McDry™ feeder cabinet models DXU-580SF and DXU-1002-1000 as well as MCU-401 Economy Value-Added Cabinet enable safe storage of moisture-sensitive devices. Limited number of mechanisms lend to reliability while providing consistent ultra-low humidity level (1% RH without nitrogen) within dry box for years without replacement of desiccant or requiring maintenance. Allowing undisrupted operation,... Read More
Malcom SP-2 helps test wettability of solder paste and components while simulating SMT mounting and reflow process. By simulating actual temperature that solder paste undergoes during preheat and reflow, instrument lets user identify deficiencies in flux activity or component wettability. Simulation of SMT mounting and reflow process with standard variable enables development of accurate,... Read More
By obtaining viscosity characteristics with only 0.2 cc sample, MALCOM PCU-02V is designed for expensive material testing and analysis. Spiral Sensor provides continuous measurement of non-Newtonian fluids with good repeatability. Measurement settings and data are available with system’s software with or without PC. With Spiral Pump Sensor, materials with high Thixotropy can be measured.... Read More
Equipped with Dip Time Sensor for measurement accuracy, MALCOM DS-10 Dip Tester provides data transmission to PC via USB cable and creates profile function. Dedicated software implements process management, and created temperature profile makes it possible to monitor, with 50 msec sampling rate, temperature of preheat and solder temperature sensors in addition to conventional management items.... Read More
Receiving real-time temperature, wettability, and profile data from MALCOM Reflow Simulators, VDM-2 Video Capture System utilizes video mixer to overlay data over video for tracking important points during reflow. Built-in scale function measures displayed object. Up to 2 CCD cameras can be connected, enabling VDM-2 to display up to 2 video feeds simultaneously. This makes it possible to observe... Read More
By using hot air of upper heater and extreme infrared radiation of lower heater together, MALCOM RDT-250C can reproduce temperature profile of reflow oven while allowing operators to observe melting state of solder paste and record process. Local matrix control system of upper heater enables reflow soldering of PCB in which thermal capacity is balanced with best heating temperature. Operator can... Read More
Compatible with all kinds of rework and SMT component types, including 01005s, RD-500V Rework Station features 2 MP full HD camera with 19 in. LCD for visual alignment. System samples data in intervals of 0.1 sec, allowing accurate temperature control. Equipped with built-in 1,000 W heaters on both top- and bottom-side, and area heater that includes six 600 W IR heaters, station can execute... Read More
Using combination of brush roller with silicone/adhesive cleaning rollers, UNITECH UC-250M-CV can clean top surface of printed circuit boards, as well as chip components attached on bottom side. Antistatic bar neutralizes static and prevents dust from collecting on top surface of PCB. In addition to multiple forward and reverse conveyor modes, UC-250M-CV provides multiple auto-passes, ensuring... Read More
Supporting Hioki FA1240 Flying Probe Tester with Windows® 7-based operation, Hioki UA1780 Fit-Line Inspection Data Creation System lets users generate test data even without PCBs. Software uses Gerber data files as opposed to CAD and is backwards compatible with previous generation Hioki 1240 Flying Probe Testers. Features, such as component libraries as well as reverse net generation, provide... Read More
Via combination of hot air reflow, nitrogen purge, and heat circulation vacuum, Eightech Vacuum Reflow RNV Series can reduce presence of solder joint voids when soldering larger PCBs and area-array packages. Flux-free soldering, accomplished by utilizing vacuum reflow in combination with hydrogen/formic acid, provides such benefits as no-flux wash process, minimized influences on insulation... Read More
Offering alternative to baking, MBBs, and nitrogen storage, McDry DXU-401DP Pass Through Dry Cabinet dehumidifies ICs to prevent micro-cracking. Double-sided doors facilitate access on either side of SMT line, and multiple access doors let operators retrieve materials and replace them quickly and efficiently. Along with ESD Safe Design that adheres to IEC-61340-5-1 (ESD) Standard, Cabinet... Read More
Featuring 2-way flexible setting twin-table design, Sayaka SAM-CT23W accommodates 2 boards up to 9.8 x 13 in. Twin fixture tables can be converted into one large size table that accommodates one printed circuit board up to 13 x 20 in. Offering automatic bit depth control to extend bit life, machine delivers max router bit cutting speed of 50 mm/sec. System handles components up to 30 mm high on... Read More
Providing alternative to baking, MBBs, and Nitrogen storage, McDry Ultra-Low Humidity Storage Cabinets dehumidify ICs to prevent micro-cracking. McDry DXU-1001/-1002 maintain 1% RH levels, while MC-1001/-1002 models maintain 3% RH levels. All cabinets conform to IPC/JEDEC J-STD 033C and IPC 1601 Standards, and ESD-safe design adheres to IEC-61340-5-1 standard. Read More
Featuring twin-table design, Sayaka SAM-CT23W accommodates 2 boards up to 9.8 x 13 in. Alternatively, twin tables can be converted into one large size fixture table that accommodates one PCB up to 13 x 20 in. Additional features include automatic bit depth control, large component height clearance, and CAD-based off-line software program. Read More
Used in conjunction with HIOKI 1240 Flying Probe ICT, HIOKI UA1780 Gerber Data Editing Software enables users to create test data without boards. System features Windows-based operation and support for FA1240's data format. In addition to minimizing inspection programming times, software offers geographical checks for component locations and profiles. Reverse net generation allows addition of... Read More
Other Company News from
Seika Machinery, Inc.