Custom MMIC

Switches and MMIC Amplifiers deliver ultra wideband operation.
Communication Systems & Equipment

Switches and MMIC Amplifiers deliver ultra wideband operation.

Operating from DC to 18 GHz,Â- non-reflective GaAs switches CMD234C4 (SP3T) and CMD235C4 (SP5T) provide 40 dB isolation @ 10 GHz and respective insertion loss values of 2 and 2.5 dB. Distributed amplifiers CMD240 (DC to 22 GHz) and CMD241 (2–22 GHz) offer respective noise figures down to 2.2 and 2.3 dB and gain values of 15 and 13.5 dB. Operating from 26–35 GHz,...

Read More »
BroadRange Distributed Amplifiers(TM) Feature Industry Leading Dynamic Range over Ultra-Wide Bandwidths
Communication Systems & Equipment

BroadRange Distributed Amplifiers(TM) Feature Industry Leading Dynamic Range over Ultra-Wide Bandwidths

Chelmsford, MAÂ- – Custom MMIC, a leading developer of performance driven monolithic microwave integrated circuits (MMICs), has developed a growing family of distributed amplifiers, called BroadRange Distributed Amplifiers™, with bandwidths from DC to 50 GHz. The distributed amplifiers provide industry leading performance in terms of dynamic range, frequency bandwidth and power...

Read More »
Driver Amplifier offers high gain over wide bandwidth.
Communication Systems & Equipment

Driver Amplifier offers high gain over wide bandwidth.

Featuring frequency range of 2–9 GHz, Model CMD232 is suited for military, space, and communications systems that require small size and high linearity. At 6 GHz, GaAs MMIC driver amplifier delivers greater than 15 dB of gain with corresponding output 1 dB compression point of +17 dBm and output IP3 of 23 dBm. Device'sÂ- 50 Ω matched design eliminates need for external DC blocks and...

Read More »
Driver Amplifier (2-6 GHz) serves RF and microwave applications.
Communication Systems & Equipment

Driver Amplifier (2-6 GHz) serves RF and microwave applications.

At 4 GHz, CMD231 wideband GaAs monolithic microwave integrated circuit (MMIC) driver amplifier delivers >14.5 dB gain withÂ- corresponding output 1 dB compression point of +13.5 dBm and output IP3 of 23.5 dBm. Unit operates from +3 to +6 V supply and has 50Ã‚Â Ω matched design. Latter eliminates need for external DC blocks and RF port matching while also offering full...

Read More »
GaAs MMIC Amplifier offers low noise figure over wide bandwidth.
Communication Systems & Equipment

GaAs MMIC Amplifier offers low noise figure over wide bandwidth.

Supporting 2–20 GHz bandwidth, CMD233 distributed low noise amplifier operates fromÂ- +3 to +6 V supply and suits military, space, and communications systems. Amplifier is 50Ã‚Â Ω matched design, which eliminates need for external DC blocks and RF port matching, and offers full passivation for increased reliability and moisture protection. At 10 GHz, amplifier delivers >9 dB of gain...

Read More »
GaAs MMIC Frequency Multipliers span 8-40 GHz.
Electrical Equipment & Systems

GaAs MMIC Frequency Multipliers span 8-40 GHz.

Available in die form, Model CMD213Â- broadband x2 active frequency multiplier covers input frequency range of 8–15 GHz. When driven by +17 dBm signal, device provides +17 dBm output power from 30–40 GHz. Also supplied in die form, Models CMD226 and CMD227 are broadband x2 passive frequency multipliers with input frequency ranges of 7–11 GHz and 8–15 GHz, respectively. Typical...

Read More »
MMIC SPDT Switch covers DC to 26 GHz.
Electrical Equipment & Systems

MMIC SPDT Switch covers DC to 26 GHz.

Supplied in die form, Model CMD230 features low insertion loss of 1.4 dB, input IP3 of 37 dBm, and high isolation of 40 dB at 13 GHz. General-purpose, broadband device operates using complementary control voltage logic lines of 0/-5 V and requires no bias supply. Applications include microwave radio, test instrumentation, and military radar/EW.

Read More »
Balanced LNA delivers high gain and low-noise.
Communication Systems & Equipment

Balanced LNA delivers high gain and low-noise.

Suited for EW and communication systems with space constraints and low power consumption requirements, 9–18 GHz CMD223 has 50 Ω matched design that eliminates need for external DC blocks and RF port matching. Full passivation promotes reliability and provides moisture protection. At 13.5 GHz,Â- this balanced low-noise amplifier (LNA) delivers >22 dB of gain with corresponding...

Read More »
Advanced GaN and GaAs MMICs Unveiled by Custom MMIC at IMS 2015
Communication Systems & Equipment

Advanced GaN and GaAs MMICs Unveiled by Custom MMIC at IMS 2015

Westford, MA –Â- Custom MMIC, (www.CustomMMIC.com), a developer of performance-driven monolithic microwave integrated circuits (MMICs), will be debuting several new GaAs and GaN MMIC amplifiers, switches, and multipliers at the 2015 International Microwave Symposium (IMS) in Phoenix, Arizona, being held from May 19 through May 21. Their latest products include two GaAs LNAs, the CMD228P4...

Read More »
Broadband MMIC GaN LNA meets high-RF power survivability needs.
Communication Systems & Equipment

Broadband MMIC GaN LNA meets high-RF power survivability needs.

Fabricated in GaN technology and supplied in leadless, 4 x 4 mm, ceramic package, CMD219C4 broadband MMIC low-noise amplifier (LNA) operates from 4–8 GHz withÂ- gain of 22.5 dB, noise figure of 1.0 dB, and output 1 dB compression point of +17 dBm. Product withstands RF input power levels of up to 5 W without permanent damage. Areas of use include microwave radios and C-band...

Read More »

All Topics