Nagase ChemteX America Corp.

Flexible Conductive Adhesive targets solar applications.
Adhesives & Sealants

Flexible Conductive Adhesive targets solar applications.

Offering damp heat resistance and conductivity stability on molybdenum and other substrates used in thin-film manufacturing, CA-141 Adhesive is suitable for stringing and bussing CIGS solar modules. Material can be partially cured for 60-90 sec, providing enough green strength to withstand induced stresses from manufacturing process until adhesive cure is completed during encapsulant lamination...

Read More »
Conductive Adhesive targets CIGS solar modules.
Adhesives & Sealants

Conductive Adhesive targets CIGS solar modules.

Intended for stringing and bussing CIGS solar modules, CA-100 offers optimal thermal cycling and damp heat stability on molybdenum tin, tin-silver, and silver-plated ribbons. High Tg is suitable for manufacturing semi-rigid glass backed modules and is not designed for flexible modules using reel-to-reel manufacturing. When partially cured for 60-90 sec, adhesive provides enough green strength to...

Read More »
Flexible Conductive Adhesive suits photovoltaic applications.
Adhesives & Sealants

Flexible Conductive Adhesive suits photovoltaic applications.

Featuring rubber-like flexibility, 530-121 is designed for ribbon stringing in thin-film solar modules. Adhesive has dispensing work life greater than 48 hours, while maintaining optimized rheology for dispensing and damp heat resistance. Providing optimal conductivity and stability when cured at 150°C, material can also be cured in 2 minutes at 1,800°C. Adhesive offers conductivity...

Read More »
ECM to Showcase Snap Cure Low-Cost Conductive Adhesives for Interconnecting Solar Cells at Intersolar NA 2012
Adhesives & Sealants

ECM to Showcase Snap Cure Low-Cost Conductive Adhesives for Interconnecting Solar Cells at Intersolar NA 2012

DELAWARE, OH - Engineered Conductive Materials, LLC, a leading global supplier of conductive interconnect materials for photovoltaic applications, will exhibit the new low temperature curing Conductive Adhesive DB-1541-LTC in North Hall, Booth #5619 at the upcoming Intersolar North America conference and exhibition, scheduled to take place July 10-12, 2012 at the Moscone Center in San Francisco,...

Read More »
Conductive Grid/Busbar Inks target thin-film solar modules.
Packaging Products & Equipment

Conductive Grid/Busbar Inks target thin-film solar modules.

With line resistivity of 8 mohm/sq/mil, CI-1031-7 and CI-1031-8 are formulated for optimal conductivity and minimal contact resistance on transparent conductive oxides used in solar applications. Solids content and rheologies enable screen printing of high aspect ratio fine lines, maximizing print thickness while reducing shadowing. Additional properties of these low-stress, low-shrinkage,...

Read More »
Spot Curing Conductive Adhesive gels in 5 seconds at 200°C.
Adhesives & Sealants

Spot Curing Conductive Adhesive gels in 5 seconds at 200°C.

Featuring rubber-like flexibility, DB-1590 serves as solder replacement in crystalline silicon solar modules using thinned silicon and/or plated bus bars. Adhesive gels in 5 seconds or less, developing sufficient strength to withstand stresses induced by manufacturing process until adhesive cure is completed during encapsulant lamination process. Product has optimized rheology for dispensing,...

Read More »
Conductive Adhesive cures at low temperatures.
Adhesives & Sealants

Conductive Adhesive cures at low temperatures.

Exhibiting rubber-like flexibility, DB-1541-LTC is suited for use in organic light emitting diodes and organic photovoltaics. Formulation is optimized for conductivity and stability on various substrates when cured at 100°C or higher. Dispensing work life is greater than 48 hr, measured as 25% increase in viscosity. Also, formulation maintains optimized rheology for dispensing as well as...

Read More »
Adhesives & Sealants

Conductive Adhesive suits solar module applications.

Available as 1- or 2-part adhesive, DB-1538-2 Conductive Stringer Attach Adhesive is suited for use in thin-film, organic, and thinned silicon solar modules. Product features low bleed on AZO and other transparent conductive oxides while maintaining optimized rheology for dispensing, damp heat resistance, and conductivity stability on tin, tin-silver, and silver-plated ribbons. As required by IEC...

Read More »
Adhesives & Sealants

Conductive Adhesive suits photovoltaic applications.

Providing optimized conductivity on molybdenum substrates, DB-1541-S3 Stringer Attach Adhesive is suited for use in thick-film, organic, and thinned silicon solar modules. Product reduces silver content while maintaining optimized rheology for dispensing, damp heat resistance, and conductivity stability on tin, tin-silver, and silver-plated ribbons. Adhesive features rubber-like flexibility and...

Read More »
Flexible Conductive Adhesive targets solar applications.
Adhesives & Sealants

Flexible Conductive Adhesive targets solar applications.

Offering damp heat resistance and conductivity stability on molybdenum and other substrates used in thin-film manufacturing, CA-141 Adhesive is suitable for stringing and bussing CIGS solar modules. Material can be partially cured for 60-90 sec, providing enough green strength to withstand induced stresses from manufacturing process until adhesive cure is completed during encapsulant lamination...

Read More »
Conductive Adhesive targets CIGS solar modules.
Adhesives & Sealants

Conductive Adhesive targets CIGS solar modules.

Intended for stringing and bussing CIGS solar modules, CA-100 offers optimal thermal cycling and damp heat stability on molybdenum tin, tin-silver, and silver-plated ribbons. High Tg is suitable for manufacturing semi-rigid glass backed modules and is not designed for flexible modules using reel-to-reel manufacturing. When partially cured for 60-90 sec, adhesive provides enough green strength to...

Read More »
Flexible Conductive Adhesive suits photovoltaic applications.
Adhesives & Sealants

Flexible Conductive Adhesive suits photovoltaic applications.

Featuring rubber-like flexibility, 530-121 is designed for ribbon stringing in thin-film solar modules. Adhesive has dispensing work life greater than 48 hours, while maintaining optimized rheology for dispensing and damp heat resistance. Providing optimal conductivity and stability when cured at 150°C, material can also be cured in 2 minutes at 1,800°C. Adhesive offers conductivity...

Read More »
ECM to Showcase Snap Cure Low-Cost Conductive Adhesives for Interconnecting Solar Cells at Intersolar NA 2012
Adhesives & Sealants

ECM to Showcase Snap Cure Low-Cost Conductive Adhesives for Interconnecting Solar Cells at Intersolar NA 2012

DELAWARE, OH - Engineered Conductive Materials, LLC, a leading global supplier of conductive interconnect materials for photovoltaic applications, will exhibit the new low temperature curing Conductive Adhesive DB-1541-LTC in North Hall, Booth #5619 at the upcoming Intersolar North America conference and exhibition, scheduled to take place July 10-12, 2012 at the Moscone Center in San Francisco,...

Read More »
Conductive Grid/Busbar Inks target thin-film solar modules.
Packaging Products & Equipment

Conductive Grid/Busbar Inks target thin-film solar modules.

With line resistivity of 8 mohm/sq/mil, CI-1031-7 and CI-1031-8 are formulated for optimal conductivity and minimal contact resistance on transparent conductive oxides used in solar applications. Solids content and rheologies enable screen printing of high aspect ratio fine lines, maximizing print thickness while reducing shadowing. Additional properties of these low-stress, low-shrinkage,...

Read More »
Spot Curing Conductive Adhesive gels in 5 seconds at 200°C.
Adhesives & Sealants

Spot Curing Conductive Adhesive gels in 5 seconds at 200°C.

Featuring rubber-like flexibility, DB-1590 serves as solder replacement in crystalline silicon solar modules using thinned silicon and/or plated bus bars. Adhesive gels in 5 seconds or less, developing sufficient strength to withstand stresses induced by manufacturing process until adhesive cure is completed during encapsulant lamination process. Product has optimized rheology for dispensing,...

Read More »
Conductive Adhesive cures at low temperatures.
Adhesives & Sealants

Conductive Adhesive cures at low temperatures.

Exhibiting rubber-like flexibility, DB-1541-LTC is suited for use in organic light emitting diodes and organic photovoltaics. Formulation is optimized for conductivity and stability on various substrates when cured at 100°C or higher. Dispensing work life is greater than 48 hr, measured as 25% increase in viscosity. Also, formulation maintains optimized rheology for dispensing as well as...

Read More »
Adhesives & Sealants

Conductive Adhesive suits solar module applications.

Available as 1- or 2-part adhesive, DB-1538-2 Conductive Stringer Attach Adhesive is suited for use in thin-film, organic, and thinned silicon solar modules. Product features low bleed on AZO and other transparent conductive oxides while maintaining optimized rheology for dispensing, damp heat resistance, and conductivity stability on tin, tin-silver, and silver-plated ribbons. As required by IEC...

Read More »
Adhesives & Sealants

Conductive Adhesive suits photovoltaic applications.

Providing optimized conductivity on molybdenum substrates, DB-1541-S3 Stringer Attach Adhesive is suited for use in thick-film, organic, and thinned silicon solar modules. Product reduces silver content while maintaining optimized rheology for dispensing, damp heat resistance, and conductivity stability on tin, tin-silver, and silver-plated ribbons. Adhesive features rubber-like flexibility and...

Read More »

All Topics