DMG / Mori Seiki USA

Two Prismatic Machining Centres to Be Launched by DMG / Mori Seiki
Agricultural & Farming Products

Two Prismatic Machining Centres to Be Launched by DMG / Mori Seiki

Following its world premiere last September at EMO 2011, the MILLTAP 700 vertical milling, drilling and tapping centre from DMG / MORI SEIKI will make its UK debut at MACH 2012. It is the group's first jointly developed machine and follows extensive market research carried out in world markets by the German and Japanese manufacturers. To maximise the time that the spindle is in cut, the linear...

Read More »
Two Prismatic Machining Centres to Be Launched by DMG / Mori Seiki
Agricultural & Farming Products

Two Prismatic Machining Centres to Be Launched by DMG / Mori Seiki

Following its world premiere last September at EMO 2011, the MILLTAP 700 vertical milling, drilling and tapping centre from DMG / MORI SEIKI will make its UK debut at MACH 2012. It is the group's first jointly developed machine and follows extensive market research carried out in world markets by the German and Japanese manufacturers. To maximise the time that the spindle is in cut, the linear...

Read More »
Turning Center machines complex components in one pass.
Communication Systems & Equipment

Turning Center machines complex components in one pass.

With 2 Y-axis turrets and transverse movement of combined counter-spindle and tailstock assembly, CTX beta 1250 4A can machine components from bar up to 102 mm diameter and 1,200 mm in length in both main and counter spindles, as well as chucked workpieces up to 300 mm long. Both spindles have integrated spindle motor that delivers up to 360 Nm at 5,000 rpm. Featuring 12 stations each, two VDI...

Read More »
Turning Center machines complex components in one pass.
Communication Systems & Equipment

Turning Center machines complex components in one pass.

With 2 Y-axis turrets and transverse movement of combined counter-spindle and tailstock assembly, CTX beta 1250 4A can machine components from bar up to 102 mm diameter and 1,200 mm in length in both main and counter spindles, as well as chucked workpieces up to 300 mm long. Both spindles have integrated spindle motor that delivers up to 360 Nm at 5,000 rpm. Featuring 12 stations each, two VDI...

Read More »
Siemens and DMG Announce Tight Process Integration from CAD to Machined Component
Software

Siemens and DMG Announce Tight Process Integration from CAD to Machined Component

At DMG's Pfronten open house (1st - 5th February 2010), the German machine tool manufacturer announced a new association with electronics giant, Siemens. It brings the power of the NX CAM (computer-aided manufacturing) system from subsidiary company, Siemens PLM Software, to the entire manufacturing process on a Deckel Maho or Gildemeister machine. The tie-up is the first to be implemented to...

Read More »
Siemens and DMG Announce Tight Process Integration from CAD to Machined Component
Software

Siemens and DMG Announce Tight Process Integration from CAD to Machined Component

At DMG's Pfronten open house (1st - 5th February 2010), the German machine tool manufacturer announced a new association with electronics giant, Siemens. It brings the power of the NX CAM (computer-aided manufacturing) system from subsidiary company, Siemens PLM Software, to the entire manufacturing process on a Deckel Maho or Gildemeister machine. The tie-up is the first to be implemented to...

Read More »
Communication Systems & Equipment

Turning/Milling Center has 2-channel workshop programming.

Equipped with 12,000 rpm (18,000 rpm optional), 29.5 hp spindle, GMX 250 S linear Turning/Milling Center incorporates linear drive in Z-axis as well as cross-carriage slide with Y and B axes. Machine allows graphically-supported, 2-channel workshop programming on basis of adapted Plus IT controls from Heidenhain with integrated TurnPlus programming. Capable of 3D-workpiece simulation, modular VMC...

Read More »
Communication Systems & Equipment

Turning/Milling Center has 2-channel workshop programming.

Equipped with 12,000 rpm (18,000 rpm optional), 29.5 hp spindle, GMX 250 S linear Turning/Milling Center incorporates linear drive in Z-axis as well as cross-carriage slide with Y and B axes. Machine allows graphically-supported, 2-channel workshop programming on basis of adapted Plus IT controls from Heidenhain with integrated TurnPlus programming. Capable of 3D-workpiece simulation, modular VMC...

Read More »
Communication Systems & Equipment

Turning Machines do not require reference point guiding.

The CTX 310 and CTX 410 Universal Turning Machines provide high-tech components at unbeatable prices and offer new expansion stages that include a counter spindle, driven tools and a Y-axis. Challenging complete processing is now a reality with the CTX 10 Series. Additional highlights include the integrated spindle motor as well as the fast-indexing servo turret for up to a 25% reduction in...

Read More »
Communication Systems & Equipment

Vertical Machining Centers feature 3D controls.

Equipped with 8,000 rpm spindle (12,000 rpm optional), DMC 35 V Series features cast-iron bed with 3-point support in C-Frame design. DMC 635/835/1035 machines employ direct drive main spindle and 20x tool magazine with double gripper for 1.6 sec tool exchanges. Capable of rapid traverse speeds to 1,181.1 ipm, series uses roller guideways in all axes and CNC-controls with 15 in. TFT screen and...

Read More »
Two Prismatic Machining Centres to Be Launched by DMG / Mori Seiki
Agricultural & Farming Products

Two Prismatic Machining Centres to Be Launched by DMG / Mori Seiki

Following its world premiere last September at EMO 2011, the MILLTAP 700 vertical milling, drilling and tapping centre from DMG / MORI SEIKI will make its UK debut at MACH 2012. It is the group's first jointly developed machine and follows extensive market research carried out in world markets by the German and Japanese manufacturers. To maximise the time that the spindle is in cut, the linear...

Read More »
Two Prismatic Machining Centres to Be Launched by DMG / Mori Seiki
Agricultural & Farming Products

Two Prismatic Machining Centres to Be Launched by DMG / Mori Seiki

Following its world premiere last September at EMO 2011, the MILLTAP 700 vertical milling, drilling and tapping centre from DMG / MORI SEIKI will make its UK debut at MACH 2012. It is the group's first jointly developed machine and follows extensive market research carried out in world markets by the German and Japanese manufacturers. To maximise the time that the spindle is in cut, the linear...

Read More »
Turning Center machines complex components in one pass.
Communication Systems & Equipment

Turning Center machines complex components in one pass.

With 2 Y-axis turrets and transverse movement of combined counter-spindle and tailstock assembly, CTX beta 1250 4A can machine components from bar up to 102 mm diameter and 1,200 mm in length in both main and counter spindles, as well as chucked workpieces up to 300 mm long. Both spindles have integrated spindle motor that delivers up to 360 Nm at 5,000 rpm. Featuring 12 stations each, two VDI...

Read More »
Turning Center machines complex components in one pass.
Communication Systems & Equipment

Turning Center machines complex components in one pass.

With 2 Y-axis turrets and transverse movement of combined counter-spindle and tailstock assembly, CTX beta 1250 4A can machine components from bar up to 102 mm diameter and 1,200 mm in length in both main and counter spindles, as well as chucked workpieces up to 300 mm long. Both spindles have integrated spindle motor that delivers up to 360 Nm at 5,000 rpm. Featuring 12 stations each, two VDI...

Read More »
Siemens and DMG Announce Tight Process Integration from CAD to Machined Component
Software

Siemens and DMG Announce Tight Process Integration from CAD to Machined Component

At DMG's Pfronten open house (1st - 5th February 2010), the German machine tool manufacturer announced a new association with electronics giant, Siemens. It brings the power of the NX CAM (computer-aided manufacturing) system from subsidiary company, Siemens PLM Software, to the entire manufacturing process on a Deckel Maho or Gildemeister machine. The tie-up is the first to be implemented to...

Read More »
Siemens and DMG Announce Tight Process Integration from CAD to Machined Component
Software

Siemens and DMG Announce Tight Process Integration from CAD to Machined Component

At DMG's Pfronten open house (1st - 5th February 2010), the German machine tool manufacturer announced a new association with electronics giant, Siemens. It brings the power of the NX CAM (computer-aided manufacturing) system from subsidiary company, Siemens PLM Software, to the entire manufacturing process on a Deckel Maho or Gildemeister machine. The tie-up is the first to be implemented to...

Read More »
Company News

Technology Center America - Grand Opening at DMG April 15-18, 2008 All are Welcome!

As a further demonstration of its commitment to better serve the American machining market at all levels and with more diversity, DMG America proudly announces the grand opening of its TECHNOLOGY CENTER AMERICA in Itasca, Illinois, just outside Chicago. This event will occur on April 15-18 with 15 machines in operation, including three new machine designs, plus ongoing technical workshops, food...

Read More »
Company News

Technology Center America - Grand Opening at DMG April 15-18, 2008 All are Welcome!

As a further demonstration of its commitment to better serve the American machining market at all levels and with more diversity, DMG America proudly announces the grand opening of its TECHNOLOGY CENTER AMERICA in Itasca, Illinois, just outside Chicago. This event will occur on April 15-18 with 15 machines in operation, including three new machine designs, plus ongoing technical workshops, food...

Read More »
Communication Systems & Equipment

Turning/Milling Center has 2-channel workshop programming.

Equipped with 12,000 rpm (18,000 rpm optional), 29.5 hp spindle, GMX 250 S linear Turning/Milling Center incorporates linear drive in Z-axis as well as cross-carriage slide with Y and B axes. Machine allows graphically-supported, 2-channel workshop programming on basis of adapted Plus IT controls from Heidenhain with integrated TurnPlus programming. Capable of 3D-workpiece simulation, modular VMC...

Read More »
Communication Systems & Equipment

Turning/Milling Center has 2-channel workshop programming.

Equipped with 12,000 rpm (18,000 rpm optional), 29.5 hp spindle, GMX 250 S linear Turning/Milling Center incorporates linear drive in Z-axis as well as cross-carriage slide with Y and B axes. Machine allows graphically-supported, 2-channel workshop programming on basis of adapted Plus IT controls from Heidenhain with integrated TurnPlus programming. Capable of 3D-workpiece simulation, modular VMC...

Read More »

All Topics