ISEL USA

Aluminum Extrusion Table Plates make solid table surfaces.
Architectural & Civil Engineering Products

Aluminum Extrusion Table Plates make solid table surfaces.

Available in lengths up to 3 m in 500 mm increments- as well as widths of 125, 250, and 375 mm, aluminum extrusion table plates allow extrusions to be joined to make solid table surfaces of any width. T slots, running length of each table plate and available on one or both sides of extrusion, facilitate fixturing and setup, eliminate need to drill and tap, and can be used with various...

Read More »
Aluminum Extrusion Table Plates make solid table surfaces.
Architectural & Civil Engineering Products

Aluminum Extrusion Table Plates make solid table surfaces.

Available in lengths up to 3 m in 500 mm increments- as well as widths of 125, 250, and 375 mm, aluminum extrusion table plates allow extrusions to be joined to make solid table surfaces of any width. T slots, running length of each table plate and available on one or both sides of extrusion, facilitate fixturing and setup, eliminate need to drill and tap, and can be used with various...

Read More »
Instant Automation Gantry has ready-to-use design.

Instant Automation Gantry has ready-to-use design.

Offered with- 6 XY travels from 11 x 13 in. to 48 x 41 in. and Z gantry clearances of 7.8, 11.8, or 19.7 in., Flat Bed Gantry provides universal tool for instant automation applications. Mounting of application tooling on Z axis instantly creates work cell, test center, or secondary manufacturing station. While available in XY or XYZ configurations, systems support rotary stages...

Read More »
Instant Automation Gantry has ready-to-use design.

Instant Automation Gantry has ready-to-use design.

Offered with- 6 XY travels from 11 x 13 in. to 48 x 41 in. and Z gantry clearances of 7.8, 11.8, or 19.7 in., Flat Bed Gantry provides universal tool for instant automation applications. Mounting of application tooling on Z axis instantly creates work cell, test center, or secondary manufacturing station. While available in XY or XYZ configurations, systems support rotary stages...

Read More »
Small Profile Belt Drive Actuator solves automation issues.
Mechanical Power Transmission

Small Profile Belt Drive Actuator solves automation issues.

Isel USA Inc, formerly Techno Inc, released its newest LEZ 1 Belt Drive Actuator also called the Automation stick", because of its extremely small profile, simple design and super low price. This small profile and low cost is what allows the automation stick to “beat” the most difficult automation applications. The LEZ 1 Belt Actuator has a cross section of 44mm high x 30mm wide and is driven...

Read More »
Small Profile Belt Drive Actuator solves automation issues.
Mechanical Power Transmission

Small Profile Belt Drive Actuator solves automation issues.

Isel USA Inc, formerly Techno Inc, released its newest LEZ 1 Belt Drive Actuator also called the Automation stick", because of its extremely small profile, simple design and super low price. This small profile and low cost is what allows the automation stick to “beat” the most difficult automation applications. The LEZ 1 Belt Actuator has a cross section of 44mm high x 30mm wide and is driven...

Read More »
Desktop Stepper Controller supports 1-4 axes.
Agricultural & Farming Products

Desktop Stepper Controller supports 1-4 axes.

Supplied with drives, power supply, I/O, enclosure, and software, 1-4 axis Model iMC-P1 features eight 24 Vdc inputs and eight 24 Vdc outputs, as well as Start, Stop, and Reset buttons. Step size function can be changed via dip switches, from full to half to micro-step. Able to perform linear and circular interpolation, controller is suited for pick-and-place, dispensing, assembly, testing,...

Read More »
Desktop Stepper Controller supports 1-4 axes.
Agricultural & Farming Products

Desktop Stepper Controller supports 1-4 axes.

Supplied with drives, power supply, I/O, enclosure, and software, 1-4 axis Model iMC-P1 features eight 24 Vdc inputs and eight 24 Vdc outputs, as well as Start, Stop, and Reset buttons. Step size function can be changed via dip switches, from full to half to micro-step. Able to perform linear and circular interpolation, controller is suited for pick-and-place, dispensing, assembly, testing,...

Read More »
Aluminum Extrusion Table Plates make solid table surfaces.
Architectural & Civil Engineering Products

Aluminum Extrusion Table Plates make solid table surfaces.

Available in lengths up to 3 m in 500 mm increments- as well as widths of 125, 250, and 375 mm, aluminum extrusion table plates allow extrusions to be joined to make solid table surfaces of any width. T slots, running length of each table plate and available on one or both sides of extrusion, facilitate fixturing and setup, eliminate need to drill and tap, and can be used with various...

Read More »
Aluminum Extrusion Table Plates make solid table surfaces.
Architectural & Civil Engineering Products

Aluminum Extrusion Table Plates make solid table surfaces.

Available in lengths up to 3 m in 500 mm increments- as well as widths of 125, 250, and 375 mm, aluminum extrusion table plates allow extrusions to be joined to make solid table surfaces of any width. T slots, running length of each table plate and available on one or both sides of extrusion, facilitate fixturing and setup, eliminate need to drill and tap, and can be used with various...

Read More »
Instant Automation Gantry has ready-to-use design.

Instant Automation Gantry has ready-to-use design.

Offered with- 6 XY travels from 11 x 13 in. to 48 x 41 in. and Z gantry clearances of 7.8, 11.8, or 19.7 in., Flat Bed Gantry provides universal tool for instant automation applications. Mounting of application tooling on Z axis instantly creates work cell, test center, or secondary manufacturing station. While available in XY or XYZ configurations, systems support rotary stages...

Read More »
Instant Automation Gantry has ready-to-use design.

Instant Automation Gantry has ready-to-use design.

Offered with- 6 XY travels from 11 x 13 in. to 48 x 41 in. and Z gantry clearances of 7.8, 11.8, or 19.7 in., Flat Bed Gantry provides universal tool for instant automation applications. Mounting of application tooling on Z axis instantly creates work cell, test center, or secondary manufacturing station. While available in XY or XYZ configurations, systems support rotary stages...

Read More »
Small Profile Belt Drive Actuator solves automation issues.
Mechanical Power Transmission

Small Profile Belt Drive Actuator solves automation issues.

Isel USA Inc, formerly Techno Inc, released its newest LEZ 1 Belt Drive Actuator also called the Automation stick", because of its extremely small profile, simple design and super low price. This small profile and low cost is what allows the automation stick to “beat” the most difficult automation applications. The LEZ 1 Belt Actuator has a cross section of 44mm high x 30mm wide and is driven...

Read More »
Small Profile Belt Drive Actuator solves automation issues.
Mechanical Power Transmission

Small Profile Belt Drive Actuator solves automation issues.

Isel USA Inc, formerly Techno Inc, released its newest LEZ 1 Belt Drive Actuator also called the Automation stick", because of its extremely small profile, simple design and super low price. This small profile and low cost is what allows the automation stick to “beat” the most difficult automation applications. The LEZ 1 Belt Actuator has a cross section of 44mm high x 30mm wide and is driven...

Read More »
Desktop Stepper Controller supports 1-4 axes.
Agricultural & Farming Products

Desktop Stepper Controller supports 1-4 axes.

Supplied with drives, power supply, I/O, enclosure, and software, 1-4 axis Model iMC-P1 features eight 24 Vdc inputs and eight 24 Vdc outputs, as well as Start, Stop, and Reset buttons. Step size function can be changed via dip switches, from full to half to micro-step. Able to perform linear and circular interpolation, controller is suited for pick-and-place, dispensing, assembly, testing,...

Read More »
Desktop Stepper Controller supports 1-4 axes.
Agricultural & Farming Products

Desktop Stepper Controller supports 1-4 axes.

Supplied with drives, power supply, I/O, enclosure, and software, 1-4 axis Model iMC-P1 features eight 24 Vdc inputs and eight 24 Vdc outputs, as well as Start, Stop, and Reset buttons. Step size function can be changed via dip switches, from full to half to micro-step. Able to perform linear and circular interpolation, controller is suited for pick-and-place, dispensing, assembly, testing,...

Read More »

All Topics