Hotset America Corporation
Hwy. 57 W
Swainsboro, GA 30401
New DH and D Systems for Quality-Enhancing and Energy-Saving Processes
DH-System designed for dynamic temperature control of injection molds. D-System for in-situ measurement of thermohydraulic processes. Used as a quality assurance tool for sampling pilot and pre-series.
Read More »
New Hi-Watty Light Aluminum Nitride Heater with Ultra-Fast Heating Process Technology
Features high thermal conductivity of 180 W/m.K as well as good power density and thermal shock resistance. Designed for high-speed heating and cooling of gases and liquids. Used in semiconductor and medical technology, as well as in the automotive and aerospace industries.
Read More »
New Hotset Data Logger for Hydraulic-Thermal Process Visualization
Features network compatible, with a color 7-inch touch screen and designed for battery operation. Offers a flexible measuring device for in-situ analysis of the energy balance of process water cycles. Used for troubleshooting, fine-tuning fluid technology processes, or monitoring as part of quality assurance.
Read More »
New Data Logger Integrates into Single and Multi-circuit Temperature Control Systems
D-System is designed for water temperatures of up to 85°C and operating pressure of up to 10 bar. Provides measurement data required to evaluate the energy flows of the water circuits in the mold. Ideal for in-situ recording of fluid-technical processes in temperature control circuits.
Read More »
New HPS 400 for Injection Molding
Specifications include heat resistance of up to 400°C and tensile strength of more than 120 N. Provides sensors with thermal and mechanical stability at critical transition zone from measuring tip to compensating leads. Offers advantages such as long life of sensors, design possibilities during installation, higher operational reliability and installation without additional protective measures.
Read More »
New Silicon Heating Element Used for Thermal Peak Loads of up to 270 Degree Celsius
Provides above average high temperature stability. Designed for use within a temperature window of -60 °C to +200 °C. Available in conventional standard formats as well as customised or product-specific designs with cut-outs and perforations.
Read More »
Partial Precision Landing in Short Cycles
Flexible tool temperature control solution Z-System from hotset impresses injection molders The thermodynamics engineers at hotset have hit the jackpot with the development of the Z-System for partial-cyclical cavity temperature control. More and more injection molders and tool manufacturers are choosing to use this high-speed method thereby optimizing the surface and structural design of their...
Read More »
Hotrod® HHP Heating Cartridges are Used for Temperature up to 1,000
Hotrod® HHP Heating Cartridges are available in 12.5 mm, 16 mm and 20 mm diameters and are suitable for thermodynamic applications. These units come with housing casings made from the alloy Incoloy that is used in aerospace applications. The Icoloy is formed by the controlled composition of carbon, aluminum, titanium, silicon and manganese.
Read More »
Z-System Measurement System provides a heating rate up to 60 K per second.
Z-System Measurement System consists of infrared camera that can be positioned between open tool halves using magnetic holder. Used in production of plastic parts in automotive construction and lighting technology, the system allows user to measure temperature statically at high-gloss zones. Product helps in eliminating surface imperfections such as weld seams, matt surfaces and jetting.
Read More »
Hotrod® HHP Heating Cartridges come in 1/8 in. diameter.
Made of stainless steel, Hotrod® HHP Heating Cartridges comes with two temperature-resistant Ni lines insulated with glass silk. Featuring cross-sections of 0.095 mm², unit is suitable for gas analysis devices and mass spectrometers applications. Offering in various lengths such as 25.4 mm (minimum) and 150 mm (maximum), product when connected to 250V source can generate heating performance...
Read More »
New DH and D Systems for Quality-Enhancing and Energy-Saving Processes
DH-System designed for dynamic temperature control of injection molds. D-System for in-situ measurement of thermohydraulic processes. Used as a quality assurance tool for sampling pilot and pre-series.
Read More »Announcement - New President of Hotset America
To all employees of Hotset America To all customers and business partners of Hotset America Dear Sir or Madam, I am pleased to announce that Kenneth Willoughby will be the President of Hotset America Corporation with immediate effect. Previous to Hotset, Kenneth was General Manager of Bright Idea in Statesboro, GA from 2002-2005, Operations Manager at Avenues Lighting in Jacksonville, Florida,...
Read More »
New Hi-Watty Light Aluminum Nitride Heater with Ultra-Fast Heating Process Technology
Features high thermal conductivity of 180 W/m.K as well as good power density and thermal shock resistance. Designed for high-speed heating and cooling of gases and liquids. Used in semiconductor and medical technology, as well as in the automotive and aerospace industries.
Read More »
New Hotset Data Logger for Hydraulic-Thermal Process Visualization
Features network compatible, with a color 7-inch touch screen and designed for battery operation. Offers a flexible measuring device for in-situ analysis of the energy balance of process water cycles. Used for troubleshooting, fine-tuning fluid technology processes, or monitoring as part of quality assurance.
Read More »New Think Tank for Injection Molders and Toolmakers
Plastics technology/ injection molding/ tool manufacturing/ temperature control technology/ surface technology/ quality assurance The System Center for Industrial Temperature Control Technology opens in Lüdenscheid Following months of preparation, the System Center for Industrial Temperature Control (SIT) is now opening for business. The new foundation is an institution created by the...
Read More »GA Hotset America Corporation Announces New Website
Swainsboro, GA hotset America Corporation is inviting visitors to explore their new website www.hotset-controls.com. The new website was created to focus on what makes hotset a reliable partner for control cabinets and cable assemblies. As a quality oriented outsourcing partner, hotset creates value for our customers in facility construction, equipment manufacturing and automation processes....
Read More »
New Data Logger Integrates into Single and Multi-circuit Temperature Control Systems
D-System is designed for water temperatures of up to 85°C and operating pressure of up to 10 bar. Provides measurement data required to evaluate the energy flows of the water circuits in the mold. Ideal for in-situ recording of fluid-technical processes in temperature control circuits.
Read More »
New HPS 400 for Injection Molding
Specifications include heat resistance of up to 400°C and tensile strength of more than 120 N. Provides sensors with thermal and mechanical stability at critical transition zone from measuring tip to compensating leads. Offers advantages such as long life of sensors, design possibilities during installation, higher operational reliability and installation without additional protective measures.
Read More »
New Silicon Heating Element Used for Thermal Peak Loads of up to 270 Degree Celsius
Provides above average high temperature stability. Designed for use within a temperature window of -60 °C to +200 °C. Available in conventional standard formats as well as customised or product-specific designs with cut-outs and perforations.
Read More »
Partial Precision Landing in Short Cycles
Flexible tool temperature control solution Z-System from hotset impresses injection molders The thermodynamics engineers at hotset have hit the jackpot with the development of the Z-System for partial-cyclical cavity temperature control. More and more injection molders and tool manufacturers are choosing to use this high-speed method thereby optimizing the surface and structural design of their...
Read More »