Everhard Products, Inc.
Canton, OH 44707
Klenk's Extruded Aluminum Folding Tools are Strong and Durable, Yet Weigh Less than Half of Similar Steel Tools
Klenk's lightweight extruded aluminum folding tools are ideal for folding up to 24-gauge steel sheet metal and ductwork. Weighing less than half of comparable steel tools, Klenk's folding tools will do the same job, yet are easier to use, manipulate and carry. Klenk folding tools' ergonomic shape with finger ridges allow better grip and easier folding. Sight holes enable accurate depth alignment...
Read More »Folding Tools feature lightweight, ergonomic design.
Constructed of extruded aluminum, KlenkÃ-® tools are capable of folding up to 24-gauge steel sheet metal and ductwork. Lightweight design facilitates manipulation and portability, while ergonomic shape with finger ridges maximizes grip. Sight holes enable accurate depth alignment for folds 3/8 and 1 in. deep. Single-piece aluminum tool has no spot-welds and is offered in 12, 18, and 24 in....
Read More »
Seam Roller has ergonomic design.
Available in right- and left-handed models, seam roller reduces hand and wrist stress with cushion-grip handle. Offset extended fork increases space between roller handle and roller and promotes visibility of work area. Unit offers greater point-of-contact clearance due to distance between end of roller handle and work surface. Offset fork also lets users reach into tight spots.
Read More »
Stackable Totes help organize tools and small parts.
Made of galvanized steel, Stak-N-Totes aid in organizing, storing, and transporting small parts in warehouses and shops. Corrosion-resistant products are available in 6 tray configurations; full-size Stak-N-Totes are 11 X 20 in. with up to 10 bins, and 11 X 13 in. size is also available. When stacked, each angled side provides convenient viewing and access to items stored in tray below. Built-in...
Read More »
Duct Slicer features ergonomic handle.
Duct Slicer, with heat-treated 12 in. steel blade, pierces and cuts metal ducts and takeoffs. Contoured, rubberized handle absorbs shock and provides comfortable and secure grip. Beveled edge on tip allows slicer to cut without causing dents to the duct. Steel shaft is durable and incorporates cutting notch to slice straight or curved openings.
Read More »
Shears cut duct sealant tapes.
Industrial-Grade Shears feature precision-ground blades that cut tape with little sticking or gumming up. They are hot-forged carbon steel, through-hardened and plated with chrome over nickel. Large, comfortable handles allow for different cutting angles for jobs in close quarters. Reinforced nylon sheath attaches to tool belt.
Read More »Tongs suit bending, forming, and seaming applications.
Fairmont Tongs, available in Straight and Offset versions, feature heavy-duty construction and are available with optional cushioned grips. Tongs produce uniform, precise bends in sheet steel and non-ferrous metals. Forged steel jaws and handles are zinc-plated. Jaws measure 3 in. wide and 1 1/8 in. deep and have bending marks that aid in making precise depth bends.
Read More »
Hex Drivers allow one-handed operation.
KlenkÃ-® Hex Drivers feature heavy-duty steel shaft that is color-coded by hex-opening size. Magnetic nose socket is made of cold-drawn, case-hardened steel and makes installing and removing hex screws easy. Nickel-chrome finish resists rust and corrosion. Quadruple, fully-fluted handles provide comfortable grip. Hex sizes include Ã-¼, 5/16, and 3/8 in.
Read More »
Aluminum Snips offer comfort and strength.
Replaceable-blade aluminum snips are offered in 2 sizes: 12 in. snips with 3 in. cut and 14 in. snips with 3 Ã-½ in. cut. Both models have smooth, rounded handle loops for optimum user comfort. Replacement blades are securely fastened with screws so that blades remain in alignment. Blade replacement kits include all necessary hardware.
Read More »Klenk's Extruded Aluminum Folding Tools are Strong and Durable, Yet Weigh Less than Half of Similar Steel Tools
Klenk's lightweight extruded aluminum folding tools are ideal for folding up to 24-gauge steel sheet metal and ductwork. Weighing less than half of comparable steel tools, Klenk's folding tools will do the same job, yet are easier to use, manipulate and carry. Klenk folding tools' ergonomic shape with finger ridges allow better grip and easier folding. Sight holes enable accurate depth alignment...
Read More »Folding Tools feature lightweight, ergonomic design.
Constructed of extruded aluminum, KlenkÃ-® tools are capable of folding up to 24-gauge steel sheet metal and ductwork. Lightweight design facilitates manipulation and portability, while ergonomic shape with finger ridges maximizes grip. Sight holes enable accurate depth alignment for folds 3/8 and 1 in. deep. Single-piece aluminum tool has no spot-welds and is offered in 12, 18, and 24 in....
Read More »
Seam Roller has ergonomic design.
Available in right- and left-handed models, seam roller reduces hand and wrist stress with cushion-grip handle. Offset extended fork increases space between roller handle and roller and promotes visibility of work area. Unit offers greater point-of-contact clearance due to distance between end of roller handle and work surface. Offset fork also lets users reach into tight spots.
Read More »
Stackable Totes help organize tools and small parts.
Made of galvanized steel, Stak-N-Totes aid in organizing, storing, and transporting small parts in warehouses and shops. Corrosion-resistant products are available in 6 tray configurations; full-size Stak-N-Totes are 11 X 20 in. with up to 10 bins, and 11 X 13 in. size is also available. When stacked, each angled side provides convenient viewing and access to items stored in tray below. Built-in...
Read More »
Duct Slicer features ergonomic handle.
Duct Slicer, with heat-treated 12 in. steel blade, pierces and cuts metal ducts and takeoffs. Contoured, rubberized handle absorbs shock and provides comfortable and secure grip. Beveled edge on tip allows slicer to cut without causing dents to the duct. Steel shaft is durable and incorporates cutting notch to slice straight or curved openings.
Read More »
Shears cut duct sealant tapes.
Industrial-Grade Shears feature precision-ground blades that cut tape with little sticking or gumming up. They are hot-forged carbon steel, through-hardened and plated with chrome over nickel. Large, comfortable handles allow for different cutting angles for jobs in close quarters. Reinforced nylon sheath attaches to tool belt.
Read More »Tongs suit bending, forming, and seaming applications.
Fairmont Tongs, available in Straight and Offset versions, feature heavy-duty construction and are available with optional cushioned grips. Tongs produce uniform, precise bends in sheet steel and non-ferrous metals. Forged steel jaws and handles are zinc-plated. Jaws measure 3 in. wide and 1 1/8 in. deep and have bending marks that aid in making precise depth bends.
Read More »
Hex Drivers allow one-handed operation.
KlenkÃ-® Hex Drivers feature heavy-duty steel shaft that is color-coded by hex-opening size. Magnetic nose socket is made of cold-drawn, case-hardened steel and makes installing and removing hex screws easy. Nickel-chrome finish resists rust and corrosion. Quadruple, fully-fluted handles provide comfortable grip. Hex sizes include Ã-¼, 5/16, and 3/8 in.
Read More »
Aluminum Snips offer comfort and strength.
Replaceable-blade aluminum snips are offered in 2 sizes: 12 in. snips with 3 in. cut and 14 in. snips with 3 Ã-½ in. cut. Both models have smooth, rounded handle loops for optimum user comfort. Replacement blades are securely fastened with screws so that blades remain in alignment. Blade replacement kits include all necessary hardware.
Read More »