Stellar Technology, Inc.

Miniature Load Cells facilitate fastener testing.
Electrical Equipment & Systems

Miniature Load Cells facilitate fastener testing.

Constructed of stainless steel with through-hole design, Series MIN845 is available in ranges from 2,500–125,000 lb. Bonded foil strain gauge force sensors provide BFSL accuracy of 2.0% and mV/V output as standard. Fully welded and shock- and vibration-resistant, units are supplied with set of top and bottom washers to ensure even loading. Load cells can be mated with in-line and DIN rail-mount...

Read More »
Fatigue-Rated Load Cells resist bending and off-axis loads.
Electrical Equipment & Systems

Fatigue-Rated Load Cells resist bending and off-axis loads.

Intended for test and measurement applications, Series CNR960 and CNR96XX tension/compression load cells have canister design rated in excess of 100 million fully reversed cycles at full scale. Both cover ranges from 25,000-2,000,000 lbf, operate from -65 to +250°F, and are compensated from 70-170°F. CNR960 provides 2 mV/V FS output, while amplified CNR96XX provides analog or digital...

Read More »
Clean-in-Place Pressure Transducer features flush diaphragm.
Electrical Equipment & Systems

Clean-in-Place Pressure Transducer features flush diaphragm.

Manufactured from all-welded stainless steel and available in 1.5 and 2 in. Tri-Clover flange sizes, Series FT31XX meets demands of wet and hostile environments of industrial process applications. Its one-piece, non-welded diaphragm promotes extended life, while lack of oil fill eliminates possibility of process contamination. Pressure ranges extend from 5-10,000 psig, and static accuracy is...

Read More »
Pressure Transducer features NPT threads and amplified output.
Sensors, Monitors & Transducers

Pressure Transducer features NPT threads and amplified output.

Combining standard NPT male process connection with flush diaphragm, Model FT29XX offers pressure ranges from 0-50 psi through 0-10,000 psig/a and static FS accuracy of ±0.25%. This all-welded stainless steel sensor with internal signal conditioning also offers selectable 4-20 mA current, voltage, and digital outputs - including RS232, RS485, and CANbus. Resistant to residue accumulation,...

Read More »
Pressure/Temperature Transducer targets subsea applications.
Sensors, Monitors & Transducers

Pressure/Temperature Transducer targets subsea applications.

Designed for working pressures to 15,000 psi and seawater depths to 17,000 ft, PT36XX and can be configured as pressure only or temperature only unit. It is constructed of Inconel and 316 stainless steel with no external load-bearing welds and comes with multi-point NIST traceable calibration record. Available with of 3-24 in. probe lengths, unit can be specified with electrical outputs of 4-20...

Read More »
Miniature PressureTransducer has flush diaphragm, zero dead volume.
Sensors, Monitors & Transducers

Miniature PressureTransducer has flush diaphragm, zero dead volume.

Featuring all welded stainless steel construction and weighing only 3.5 oz, miniature series FT290 covers ranges from 2,000-10,000 psia/psig and provides 3 mV/V full scale output with 10 Vdc excitation. It features operating temperature of -100 to +300°F and compensated temperature range of -65 to +250°F, infinite resolution, and low sensitivity to vibration/shock. Available with...

Read More »
New High Performance/High Value Pancake Load Cell
Electrical Equipment & Systems

New High Performance/High Value Pancake Load Cell

Amherst, NY - Stellar Technology's new Model PNC700 is a high performance, feature rich, general purpose tension/compression load cell which combines high accuracy (0.05% BFSL), high off axis performance, high fatigue life, and large industry standard loading threads with a very competitive price. The Model PNC700 comes standard with 3 mV/V output. Optional internal or in-line amplifiers are...

Read More »
Stainless Pressure Transducer withstands severe applications.
Sensors, Monitors & Transducers

Stainless Pressure Transducer withstands severe applications.

With standard output of 3 mV/V, Model GT100 delivers linearity and hysteresis of 0.25% across pressure ranges from 150-20,000 psig. Unit features cleanable pressure cavity, built-in overpressure protection, and stainless steel diaphragm, which can be replaced in field as needed. Thermal isolation ensures performance over operating temperature of -100 to +300°F. Compensated temperature range...

Read More »
Pressure Transducer is shock and vibration protected.
Sensors, Monitors & Transducers

Pressure Transducer is shock and vibration protected.

Model GT32XX is rugged, all-welded stainless steel sensor that operates over -65° to +250°F temperature range. It has static accuracy of ±0.25% BFSL and voltage, current, and/or digital output signal, while pressure ranges are available from 0-30,000 psi through 0-100,000 psig/a. Burst pressure is 2x FSO or 150,000, whichever is less. Integrating with bayonet-style electrical...

Read More »
DIN-Rail Amplifier operates with LVDTs.
Electronic Components & Devices

DIN-Rail Amplifier operates with LVDTs.

Suited for use with LVDTs requiring AC excitation and synchronous demodulation, Series AP5102 accepts signal inputs of 20 mV to 4 V and produces analog outputs of 0-10 Vdc, ±10 Vdc, or 4-20 mA. Amplifier incorporates DC-DC converter, which ensures output of unit is isolated from supply. Packaged in DIN rail mount housing constructed of high-impact thermoplastic, unit permits access to screw...

Read More »
Miniature Load Cells facilitate fastener testing.
Electrical Equipment & Systems

Miniature Load Cells facilitate fastener testing.

Constructed of stainless steel with through-hole design, Series MIN845 is available in ranges from 2,500–125,000 lb. Bonded foil strain gauge force sensors provide BFSL accuracy of 2.0% and mV/V output as standard. Fully welded and shock- and vibration-resistant, units are supplied with set of top and bottom washers to ensure even loading. Load cells can be mated with in-line and DIN rail-mount...

Read More »
Fatigue-Rated Load Cells resist bending and off-axis loads.
Electrical Equipment & Systems

Fatigue-Rated Load Cells resist bending and off-axis loads.

Intended for test and measurement applications, Series CNR960 and CNR96XX tension/compression load cells have canister design rated in excess of 100 million fully reversed cycles at full scale. Both cover ranges from 25,000-2,000,000 lbf, operate from -65 to +250°F, and are compensated from 70-170°F. CNR960 provides 2 mV/V FS output, while amplified CNR96XX provides analog or digital...

Read More »
Clean-in-Place Pressure Transducer features flush diaphragm.
Electrical Equipment & Systems

Clean-in-Place Pressure Transducer features flush diaphragm.

Manufactured from all-welded stainless steel and available in 1.5 and 2 in. Tri-Clover flange sizes, Series FT31XX meets demands of wet and hostile environments of industrial process applications. Its one-piece, non-welded diaphragm promotes extended life, while lack of oil fill eliminates possibility of process contamination. Pressure ranges extend from 5-10,000 psig, and static accuracy is...

Read More »
Pressure Transducer features NPT threads and amplified output.
Sensors, Monitors & Transducers

Pressure Transducer features NPT threads and amplified output.

Combining standard NPT male process connection with flush diaphragm, Model FT29XX offers pressure ranges from 0-50 psi through 0-10,000 psig/a and static FS accuracy of ±0.25%. This all-welded stainless steel sensor with internal signal conditioning also offers selectable 4-20 mA current, voltage, and digital outputs - including RS232, RS485, and CANbus. Resistant to residue accumulation,...

Read More »
Pressure/Temperature Transducer targets subsea applications.
Sensors, Monitors & Transducers

Pressure/Temperature Transducer targets subsea applications.

Designed for working pressures to 15,000 psi and seawater depths to 17,000 ft, PT36XX and can be configured as pressure only or temperature only unit. It is constructed of Inconel and 316 stainless steel with no external load-bearing welds and comes with multi-point NIST traceable calibration record. Available with of 3-24 in. probe lengths, unit can be specified with electrical outputs of 4-20...

Read More »
Miniature PressureTransducer has flush diaphragm, zero dead volume.
Sensors, Monitors & Transducers

Miniature PressureTransducer has flush diaphragm, zero dead volume.

Featuring all welded stainless steel construction and weighing only 3.5 oz, miniature series FT290 covers ranges from 2,000-10,000 psia/psig and provides 3 mV/V full scale output with 10 Vdc excitation. It features operating temperature of -100 to +300°F and compensated temperature range of -65 to +250°F, infinite resolution, and low sensitivity to vibration/shock. Available with...

Read More »
New High Performance/High Value Pancake Load Cell
Electrical Equipment & Systems

New High Performance/High Value Pancake Load Cell

Amherst, NY - Stellar Technology's new Model PNC700 is a high performance, feature rich, general purpose tension/compression load cell which combines high accuracy (0.05% BFSL), high off axis performance, high fatigue life, and large industry standard loading threads with a very competitive price. The Model PNC700 comes standard with 3 mV/V output. Optional internal or in-line amplifiers are...

Read More »
Stainless Pressure Transducer withstands severe applications.
Sensors, Monitors & Transducers

Stainless Pressure Transducer withstands severe applications.

With standard output of 3 mV/V, Model GT100 delivers linearity and hysteresis of 0.25% across pressure ranges from 150-20,000 psig. Unit features cleanable pressure cavity, built-in overpressure protection, and stainless steel diaphragm, which can be replaced in field as needed. Thermal isolation ensures performance over operating temperature of -100 to +300°F. Compensated temperature range...

Read More »
Pressure Transducer is shock and vibration protected.
Sensors, Monitors & Transducers

Pressure Transducer is shock and vibration protected.

Model GT32XX is rugged, all-welded stainless steel sensor that operates over -65° to +250°F temperature range. It has static accuracy of ±0.25% BFSL and voltage, current, and/or digital output signal, while pressure ranges are available from 0-30,000 psi through 0-100,000 psig/a. Burst pressure is 2x FSO or 150,000, whichever is less. Integrating with bayonet-style electrical...

Read More »
DIN-Rail Amplifier operates with LVDTs.
Electronic Components & Devices

DIN-Rail Amplifier operates with LVDTs.

Suited for use with LVDTs requiring AC excitation and synchronous demodulation, Series AP5102 accepts signal inputs of 20 mV to 4 V and produces analog outputs of 0-10 Vdc, ±10 Vdc, or 4-20 mA. Amplifier incorporates DC-DC converter, which ensures output of unit is isolated from supply. Packaged in DIN rail mount housing constructed of high-impact thermoplastic, unit permits access to screw...

Read More »

All Topics