VectorNav Technologies

OEM GPS-Compass negates magnetic interference issues.
Test & Measurement

OEM GPS-Compass negates magnetic interference issues.

Unaffected by magnetic disturbancesÂ- as well as changes to magnetic environment, VN-360 provides accurate, True North heading solution for systems integrators seeking alternative to magnetic-based sensors. This miniature heading and position sensor incorporates 2 onboard GNSS receivers and calculates relative position between its 2 GNSS antennas. With separation...

Read More »
VectorNav Introduces Surface Mount VN-300 Dual Antenna GPS/INS at AUVSI 2015
Communication Systems & Equipment

VectorNav Introduces Surface Mount VN-300 Dual Antenna GPS/INS at AUVSI 2015

New VN-300 Surface Mount Device expands VectorNav's product offerings to include the industry's smallest, lightest, and lowest cost GPS-compass/INS on the market DALLAS –Â- VectorNav Technologies introduced today a surface mount version of its market-leading VN-300 Dual Antenna GPS-aided Inertial Navigation System (GPS/INS). The VN-300 surface mount device (SMD) is a miniature...

Read More »
Chemicals & Gases

Inertial Navigation System incorporates GPS compassing.

Incorporating MEMS sensor technology, VN-300 GPS/INS combines 3-axis accelerometers, 3-axis gyros, 3-axis magnetometers, barometric pressure sensor, 2 GPS receivers, and microprocessor in aluminum enclosure. When in motion, unit couples position and velocity measurements from GPS receivers with measurements from inertial sensors to provide position, velocity, and attitude estimates. GPS receivers...

Read More »
VectorNav Technologies Supplies VN-200 GPS/INS for Troll Systems' SkyLink MINI II Antennas
Test & Measurement

VectorNav Technologies Supplies VN-200 GPS/INS for Troll Systems' SkyLink MINI II Antennas

DALLAS -- VectorNav Technologies, a leading provider of inertial navigation solutions for the industrial and military markets, announced today that it will supply its VN-200 GPS-aided inertial navigation system (GPS/INS) for use in Troll Systems' SkyLink MINI II directional antennas. The next generation version of the SkyLink antenna provides Troll Systems' customers with a lower-cost and easier...

Read More »
Test & Measurement

GPS-Aided Inertial Navigation System comes in SMT chip.

Combining GPS module with MEMS inertial and pressure sensor technology, fully embeddable VN-200 GPS-Aided Inertial Navigation System (GPS/INS) is supplied as surface mount (SMT) chip and provides coupled position, velocity, and attitude solution. Onboard microprocessor runs aerospace-grade Kalman filter algorithm at rate of up to 200 Hz and provides accuracies better than 0.25° in pitch and...

Read More »
Sensors, Monitors & Transducers

Miniature Orientation Sensor operates in harsh environments.

Encased in 33 x 26 x 9 mm aluminum package, VN-100 Rugged is built on 9-axis suite of factory calibrated MEMS accelerometers, gyroscopes, and magnetometers. Unit provides accuracies of better than 0.5° in pitch and roll and 2° in heading. Each sensor is calibrated for bias, scale factor, and misalignment errors. Running on all VN-100 sensors at 200 Hz, Vector Processing Engine(TM)...

Read More »
Sensors, Monitors & Transducers

Orientation Sensor targets embedded applications.

Housed in surface mount package for integration into existing enclosures, VN-100 Attitude Heading Reference System combines all sensors needed to accurately compute full 3D orientation, angular rates, and inertial acceleration. Attitude estimation algorithm, installed onboard 32-bit ARM processor, fuses sensor data from separate onboard MEMS sensors together with statistical data, which...

Read More »
OEM GPS-Compass negates magnetic interference issues.
Test & Measurement

OEM GPS-Compass negates magnetic interference issues.

Unaffected by magnetic disturbancesÂ- as well as changes to magnetic environment, VN-360 provides accurate, True North heading solution for systems integrators seeking alternative to magnetic-based sensors. This miniature heading and position sensor incorporates 2 onboard GNSS receivers and calculates relative position between its 2 GNSS antennas. With separation...

Read More »
VectorNav Introduces Surface Mount VN-300 Dual Antenna GPS/INS at AUVSI 2015
Communication Systems & Equipment

VectorNav Introduces Surface Mount VN-300 Dual Antenna GPS/INS at AUVSI 2015

New VN-300 Surface Mount Device expands VectorNav's product offerings to include the industry's smallest, lightest, and lowest cost GPS-compass/INS on the market DALLAS –Â- VectorNav Technologies introduced today a surface mount version of its market-leading VN-300 Dual Antenna GPS-aided Inertial Navigation System (GPS/INS). The VN-300 surface mount device (SMD) is a miniature...

Read More »
Chemicals & Gases

Inertial Navigation System incorporates GPS compassing.

Incorporating MEMS sensor technology, VN-300 GPS/INS combines 3-axis accelerometers, 3-axis gyros, 3-axis magnetometers, barometric pressure sensor, 2 GPS receivers, and microprocessor in aluminum enclosure. When in motion, unit couples position and velocity measurements from GPS receivers with measurements from inertial sensors to provide position, velocity, and attitude estimates. GPS receivers...

Read More »
VectorNav Technologies Supplies VN-200 GPS/INS for Troll Systems' SkyLink MINI II Antennas
Test & Measurement

VectorNav Technologies Supplies VN-200 GPS/INS for Troll Systems' SkyLink MINI II Antennas

DALLAS -- VectorNav Technologies, a leading provider of inertial navigation solutions for the industrial and military markets, announced today that it will supply its VN-200 GPS-aided inertial navigation system (GPS/INS) for use in Troll Systems' SkyLink MINI II directional antennas. The next generation version of the SkyLink antenna provides Troll Systems' customers with a lower-cost and easier...

Read More »
Test & Measurement

GPS-Aided Inertial Navigation System comes in SMT chip.

Combining GPS module with MEMS inertial and pressure sensor technology, fully embeddable VN-200 GPS-Aided Inertial Navigation System (GPS/INS) is supplied as surface mount (SMT) chip and provides coupled position, velocity, and attitude solution. Onboard microprocessor runs aerospace-grade Kalman filter algorithm at rate of up to 200 Hz and provides accuracies better than 0.25° in pitch and...

Read More »
Sensors, Monitors & Transducers

Miniature Orientation Sensor operates in harsh environments.

Encased in 33 x 26 x 9 mm aluminum package, VN-100 Rugged is built on 9-axis suite of factory calibrated MEMS accelerometers, gyroscopes, and magnetometers. Unit provides accuracies of better than 0.5° in pitch and roll and 2° in heading. Each sensor is calibrated for bias, scale factor, and misalignment errors. Running on all VN-100 sensors at 200 Hz, Vector Processing Engine(TM)...

Read More »
Sensors, Monitors & Transducers

Orientation Sensor targets embedded applications.

Housed in surface mount package for integration into existing enclosures, VN-100 Attitude Heading Reference System combines all sensors needed to accurately compute full 3D orientation, angular rates, and inertial acceleration. Attitude estimation algorithm, installed onboard 32-bit ARM processor, fuses sensor data from separate onboard MEMS sensors together with statistical data, which...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers