Lord Corp.
Cary, NC 27511-7923
Share:
Chemlok Film Adhesive eliminates the need for applying multiple coats for bonding rubber-to-metal.
Suitable for lining tanks and pipes, Chemlok-® Film Adhesive requires a single application to bond rubber-to-metal. Eliminating use of SCBA equipment during application, Adhesive can be safely applied in confined spaces without fear of explosion or asphyxiation. The option to pre-laminate uncured rubber substrates, reduces the steps needed to complete the rubber lining process. Having...
Read More »
Lord Corporation's New Release Agents increases mold-picking time and reduces mold folding in molds.
Suitable for rubber-to-metal part manufacturing facilities, LORD LokRelease solutions offer semi-permanent, anti-stick surface coating for easy part removal from molded Elastomers. Presented in aerosol, aqueous and solvent-based solutions, a single application allows for multiple molding cycles, eliminating post-finishing problems. Containing no Class I or Class II ozone-depleting substances;...
Read More »
Chemlok Film Adhesive eliminates the need for applying multiple coats for bonding rubber-to-metal.
Suitable for lining tanks and pipes, Chemlok-® Film Adhesive requires a single application to bond rubber-to-metal. Eliminating use of SCBA equipment during application, Adhesive can be safely applied in confined spaces without fear of explosion or asphyxiation. The option to pre-laminate uncured rubber substrates, reduces the steps needed to complete the rubber lining process. Having...
Read More »
Lord Corporation's New Release Agents increases mold-picking time and reduces mold folding in molds.
Suitable for rubber-to-metal part manufacturing facilities, LORD LokRelease solutions offer semi-permanent, anti-stick surface coating for easy part removal from molded Elastomers. Presented in aerosol, aqueous and solvent-based solutions, a single application allows for multiple molding cycles, eliminating post-finishing problems. Containing no Class I or Class II ozone-depleting substances;...
Read More »
LORD Corporation Scheduled to Present on a Variety of Topics at Upcoming International Elastomer Conference
Cary, N.C. – LORD Corporation – a leader in the development of adhesives, coatings, motion management devices, and sensing technologies – has announced a full schedule of presentations at the upcoming International Elastomer Conference. To be held Oct. 10-13 at the David L. Lawrence Convention Center in Pittsburgh, Pa., the show is an annual event held by the Rubber Division of the ACS...
Read More »
LORD Corporation Scheduled to Present on a Variety of Topics at Upcoming International Elastomer Conference
Cary, N.C. – LORD Corporation – a leader in the development of adhesives, coatings, motion management devices, and sensing technologies – has announced a full schedule of presentations at the upcoming International Elastomer Conference. To be held Oct. 10-13 at the David L. Lawrence Convention Center in Pittsburgh, Pa., the show is an annual event held by the Rubber Division of the ACS...
Read More »LORD Extends Warranty for Bell 407 Main Rotor Hub Components to 2,500 Hours
LORD Corporation has extended the warranty on all the Bell 407 Main Rotor hub elastomeric components to 2,500 hours or three years (whichever comes first). Parts covered by the extended warranty include the lead lag bearing (407-310-102-101 -103), shear bearing (407-310-101-101 -105) and damper (407-310-100-105 & -107). Bell Helicopter approved the upgrade to LORD SPE IIA elastomer on the lead...
Read More »LORD Extends Warranty for Bell 407 Main Rotor Hub Components to 2,500 Hours
LORD Corporation has extended the warranty on all the Bell 407 Main Rotor hub elastomeric components to 2,500 hours or three years (whichever comes first). Parts covered by the extended warranty include the lead lag bearing (407-310-102-101 -103), shear bearing (407-310-101-101 -105) and damper (407-310-100-105 & -107). Bell Helicopter approved the upgrade to LORD SPE IIA elastomer on the lead...
Read More »LORD Corporation Advances Materials Development with DEK Galaxy and Wafer Transport Solution
Enjoying the materials innovation success it has realized with its first DEK Galaxy system, Cary, North Carolina-based LORD Corporation recently expanded its development capacity with the addition of a second Galaxy equipped with DEK's new Wafer Transport Solution. Our first Galaxy has proven to be an integral part of our wafer-applied underfill (WAU) materials program," explains Candice Brannen,...
Read More »LORD Corporation Advances Materials Development with DEK Galaxy and Wafer Transport Solution
Enjoying the materials innovation success it has realized with its first DEK Galaxy system, Cary, North Carolina-based LORD Corporation recently expanded its development capacity with the addition of a second Galaxy equipped with DEK's new Wafer Transport Solution. Our first Galaxy has proven to be an integral part of our wafer-applied underfill (WAU) materials program," explains Candice Brannen,...
Read More »
Chemlok Film Adhesive eliminates the need for applying multiple coats for bonding rubber-to-metal.
Suitable for lining tanks and pipes, Chemlok-® Film Adhesive requires a single application to bond rubber-to-metal. Eliminating use of SCBA equipment during application, Adhesive can be safely applied in confined spaces without fear of explosion or asphyxiation. The option to pre-laminate uncured rubber substrates, reduces the steps needed to complete the rubber lining process. Having...
Read More »
Lord Corporation's New Release Agents increases mold-picking time and reduces mold folding in molds.
Suitable for rubber-to-metal part manufacturing facilities, LORD LokRelease solutions offer semi-permanent, anti-stick surface coating for easy part removal from molded Elastomers. Presented in aerosol, aqueous and solvent-based solutions, a single application allows for multiple molding cycles, eliminating post-finishing problems. Containing no Class I or Class II ozone-depleting substances;...
Read More »
Chemlok Film Adhesive eliminates the need for applying multiple coats for bonding rubber-to-metal.
Suitable for lining tanks and pipes, Chemlok-® Film Adhesive requires a single application to bond rubber-to-metal. Eliminating use of SCBA equipment during application, Adhesive can be safely applied in confined spaces without fear of explosion or asphyxiation. The option to pre-laminate uncured rubber substrates, reduces the steps needed to complete the rubber lining process. Having...
Read More »
Lord Corporation's New Release Agents increases mold-picking time and reduces mold folding in molds.
Suitable for rubber-to-metal part manufacturing facilities, LORD LokRelease solutions offer semi-permanent, anti-stick surface coating for easy part removal from molded Elastomers. Presented in aerosol, aqueous and solvent-based solutions, a single application allows for multiple molding cycles, eliminating post-finishing problems. Containing no Class I or Class II ozone-depleting substances;...
Read More »
LORD Corporation Scheduled to Present on a Variety of Topics at Upcoming International Elastomer Conference
Cary, N.C. – LORD Corporation – a leader in the development of adhesives, coatings, motion management devices, and sensing technologies – has announced a full schedule of presentations at the upcoming International Elastomer Conference. To be held Oct. 10-13 at the David L. Lawrence Convention Center in Pittsburgh, Pa., the show is an annual event held by the Rubber Division of the ACS...
Read More »
LORD Corporation Scheduled to Present on a Variety of Topics at Upcoming International Elastomer Conference
Cary, N.C. – LORD Corporation – a leader in the development of adhesives, coatings, motion management devices, and sensing technologies – has announced a full schedule of presentations at the upcoming International Elastomer Conference. To be held Oct. 10-13 at the David L. Lawrence Convention Center in Pittsburgh, Pa., the show is an annual event held by the Rubber Division of the ACS...
Read More »LORD Extends Warranty for Bell 407 Main Rotor Hub Components to 2,500 Hours
LORD Corporation has extended the warranty on all the Bell 407 Main Rotor hub elastomeric components to 2,500 hours or three years (whichever comes first). Parts covered by the extended warranty include the lead lag bearing (407-310-102-101 -103), shear bearing (407-310-101-101 -105) and damper (407-310-100-105 & -107). Bell Helicopter approved the upgrade to LORD SPE IIA elastomer on the lead...
Read More »LORD Extends Warranty for Bell 407 Main Rotor Hub Components to 2,500 Hours
LORD Corporation has extended the warranty on all the Bell 407 Main Rotor hub elastomeric components to 2,500 hours or three years (whichever comes first). Parts covered by the extended warranty include the lead lag bearing (407-310-102-101 -103), shear bearing (407-310-101-101 -105) and damper (407-310-100-105 & -107). Bell Helicopter approved the upgrade to LORD SPE IIA elastomer on the lead...
Read More »LORD Corporation Advances Materials Development with DEK Galaxy and Wafer Transport Solution
Enjoying the materials innovation success it has realized with its first DEK Galaxy system, Cary, North Carolina-based LORD Corporation recently expanded its development capacity with the addition of a second Galaxy equipped with DEK's new Wafer Transport Solution. Our first Galaxy has proven to be an integral part of our wafer-applied underfill (WAU) materials program," explains Candice Brannen,...
Read More »LORD Corporation Advances Materials Development with DEK Galaxy and Wafer Transport Solution
Enjoying the materials innovation success it has realized with its first DEK Galaxy system, Cary, North Carolina-based LORD Corporation recently expanded its development capacity with the addition of a second Galaxy equipped with DEK's new Wafer Transport Solution. Our first Galaxy has proven to be an integral part of our wafer-applied underfill (WAU) materials program," explains Candice Brannen,...
Read More »