SEICA Inc.

New Pilot V8 Next> Series Flying Probe Systems Measure Signals at Frequencies over 1.5 GHz
Fluid & Gas Flow Equipment

New Pilot V8 Next> Series Flying Probe Systems Measure Signals at Frequencies over 1.5 GHz

Pilot V8 Next> Series Flying Probe Systems are available in HR and XL versions and are capable of hosting from 1 to 12 magazines of boards to be tested. System provides up to 20 mobile resources for testing electronic board. HR version is used for probing miniaturized devices down to 30 µm whereas the XL version comes with work area measuring 800 x 650 mm that accommodates extra-large boards....

Read More »
Press preview for Seica Inc. participation at Apex, San Diego, California, February 27, 28 - March 1, 2018, Booth 2323, San Diego Convention Center.
Machinery & Machining Tools

Press preview for Seica Inc. participation at Apex, San Diego, California, February 27, 28 - March 1, 2018, Booth 2323, San Diego Convention Center.

Haverhill, MA January, 2018. Following the winning philosophy which characterized its business in testing and assembly over three decades, based on the constant and rapid innovation of its solutions, Seica will attend the Apex 2018 exhibition with many new products. Products will complement some restyling’s of solutions presented in the past, almost completely renewing the portfolio of Seica...

Read More »
Press Preview for Seica Inc. Participation at SMTAi Schaumburg, Illinois Booth # 315
Test & Measurement

Press Preview for Seica Inc. Participation at SMTAi Schaumburg, Illinois Booth # 315

- New Frontiers of Testing - Salem N.H, USA, August 2017 - Seica Inc. will be exhibiting at the SMTAi show held in Schaumburg, IL this year showing our expanding lines of test and assembly equipment and demonstrating new frontiers of testing - the upcoming new strategy in testing and manufacturing. The new frontiers of testing are faced daily with increasingly complex and challenging scenarios in...

Read More »
Preview for Seica Inc for Semicon West - Semicon West - 7/11/17 - 7/13/17 - San Francisco, CA - Booth #7709
Communication Systems & Equipment

Preview for Seica Inc for Semicon West - Semicon West - 7/11/17 - 7/13/17 - San Francisco, CA - Booth #7709

Salem, New Hampshire USA, July 2017 - Seica will be showcasing the new Industrial Monitoring solution at this exhibition. The solution has been conceived with a special focus towards energy saving requirements and predictive monitoring of events, in compliance with the principles of Industry 4.0. Our system on the booth, the Pilot 4DV8 will integrate Seica’s industrial monitoring hardware, and...

Read More »
In the Ramp Light: Automation and Industry 4.0
Machinery & Machining Tools

In the Ramp Light: Automation and Industry 4.0

Strambino, Italy - The theme for Seica at Apex this year will be automation and Industry 4.0. Highlights will include the traditional Compact line of bed of nails and functional testers; the Pilot line, a truly versatile and multi-faceted flying probe system; its Mini line of benchtop ATE, and the Firefly line, a premier laser selective soldering system. Seica will be demonstrating process...

Read More »
Test & Measurement

Seica Inc. Demonstrates Pilot 4DV8 at Automotive Testing Expo

Salem, NH USA – Seica Inc. will be exhibiting at the Automotive Testing Expo the Pilot 4DV8. With Seica's 25+ years of experience in testing and especially in the world of automotive testing where the technology advances at a face pace, this will be an opportunity to see first-hand the latest flying prober technology on the market today.Â-  With the increasing demand to save power and...

Read More »
Press Preview for Seica S.p.A. Participation at FIEE 2015, March 23 - 27 2015, Booth 230, San Paolo - Brasil
Fluid & Gas Flow Equipment

Press Preview for Seica S.p.A. Participation at FIEE 2015, March 23 - 27 2015, Booth 230, San Paolo - Brasil

Strambino, ItalyÂ- — Seica will be present in the Arbitec Booth, partner for Brazil, where everyone is invited to see the new ATE/instrument MINI 80, the smallest rack-mountable and powerful ATE, with full in-circuit and functional test capabilities enclosed in a box of the same size of a DVD player. The solution can be used as stand-alone or as add-on tool for more complex tester...

Read More »
Seica Inc. Announces Participation at Apex, February 24-25, 2015, Booth # 1127, San Diego, CA
Fluid & Gas Flow Equipment

Seica Inc. Announces Participation at Apex, February 24-25, 2015, Booth # 1127, San Diego, CA

Salem –Â- Seica Inc. will be exhibiting our new line of flying prober, the Pilot 4D line which will be represented at the show by the Pilot 4DV8 and Pilot FX. The Pilot 4D line represents the latest in technology in flying probe testing for both ICT, functional testing and data regeneration applications. The Pilot 4DV8 will show the latest features for automotive and LED light testing...

Read More »
Flying Fixture Tester performs in-circuit, functional panel tests.
Test & Measurement

Flying Fixture Tester performs in-circuit, functional panel tests.

Designed specifically to test panels, Pilot4D FX bridges gap between Bed of Nails and Flying Probe test. Functionality optimizes and shares test resources, including special instrumentation, while mechanical architecture allows test head, which carries fixture, to rotate in order to accommodate any configuration of panel layout. Fully implementable in automated production lines, board features...

Read More »
Press Preview for Seica Inc. Participation at IPC Apex, March 25-27, 2014, Booth # 1883, Las Vegas
Software

Press Preview for Seica Inc. Participation at IPC Apex, March 25-27, 2014, Booth # 1883, Las Vegas

Salem, NH — Welcome to the new dimension of test, the fourth dimension". As usual, Seica is back to the exhibition with a full range of ATE and Process Assembly systems for your low to high volume requirements. Seica will demonstrate a lot of innovative solutions for test and selective soldering, but this time we are raising the bar of technology over the top! The "new dimension" of test will...

Read More »
Company News

Seica Publishes Video About the New Compact Slim Next> Series

Strambino, Italy – October 2018 . In our new row of Educational Videos, we introduce today the Compact Slim Next> series, a very small (only 300 mm width) yet modular bed of nails tester especially suitable for deployment in as a series of equivalent systems, loaded either manually or via a COBOT solution. The system features a 180×300 mm test area with an automated receiver specifically...

Read More »
New Pilot V8 Next> Series Flying Probe Systems Measure Signals at Frequencies over 1.5 GHz
Fluid & Gas Flow Equipment

New Pilot V8 Next> Series Flying Probe Systems Measure Signals at Frequencies over 1.5 GHz

Pilot V8 Next> Series Flying Probe Systems are available in HR and XL versions and are capable of hosting from 1 to 12 magazines of boards to be tested. System provides up to 20 mobile resources for testing electronic board. HR version is used for probing miniaturized devices down to 30 µm whereas the XL version comes with work area measuring 800 x 650 mm that accommodates extra-large boards....

Read More »
Company News

New Haverhill Headquarters Celebration

Haverhill, June, 2018 – On 6 June SEICA inc. has officially inaugurated the new North American headquarters in the Ward Hill Business Park East of Haverhill, Massachusetts. The new offices are located in a single building, located in a tree lined business park, with 16,000 square feet of space on 2 floors. The move from the previous location in Salem, NH was needed to accommodate the growing...

Read More »
Press preview for Seica Inc. participation at Apex, San Diego, California, February 27, 28 - March 1, 2018, Booth 2323, San Diego Convention Center.
Machinery & Machining Tools

Press preview for Seica Inc. participation at Apex, San Diego, California, February 27, 28 - March 1, 2018, Booth 2323, San Diego Convention Center.

Haverhill, MA January, 2018. Following the winning philosophy which characterized its business in testing and assembly over three decades, based on the constant and rapid innovation of its solutions, Seica will attend the Apex 2018 exhibition with many new products. Products will complement some restyling’s of solutions presented in the past, almost completely renewing the portfolio of Seica...

Read More »
Press Preview for Seica Inc. Participation at SMTAi Schaumburg, Illinois Booth # 315
Test & Measurement

Press Preview for Seica Inc. Participation at SMTAi Schaumburg, Illinois Booth # 315

- New Frontiers of Testing - Salem N.H, USA, August 2017 - Seica Inc. will be exhibiting at the SMTAi show held in Schaumburg, IL this year showing our expanding lines of test and assembly equipment and demonstrating new frontiers of testing - the upcoming new strategy in testing and manufacturing. The new frontiers of testing are faced daily with increasingly complex and challenging scenarios in...

Read More »
Preview for Seica Inc for Semicon West - Semicon West - 7/11/17 - 7/13/17 - San Francisco, CA - Booth #7709
Communication Systems & Equipment

Preview for Seica Inc for Semicon West - Semicon West - 7/11/17 - 7/13/17 - San Francisco, CA - Booth #7709

Salem, New Hampshire USA, July 2017 - Seica will be showcasing the new Industrial Monitoring solution at this exhibition. The solution has been conceived with a special focus towards energy saving requirements and predictive monitoring of events, in compliance with the principles of Industry 4.0. Our system on the booth, the Pilot 4DV8 will integrate Seica’s industrial monitoring hardware, and...

Read More »
In the Ramp Light: Automation and Industry 4.0
Machinery & Machining Tools

In the Ramp Light: Automation and Industry 4.0

Strambino, Italy - The theme for Seica at Apex this year will be automation and Industry 4.0. Highlights will include the traditional Compact line of bed of nails and functional testers; the Pilot line, a truly versatile and multi-faceted flying probe system; its Mini line of benchtop ATE, and the Firefly line, a premier laser selective soldering system. Seica will be demonstrating process...

Read More »
Test & Measurement

Seica Inc. Demonstrates Pilot 4DV8 at Automotive Testing Expo

Salem, NH USA – Seica Inc. will be exhibiting at the Automotive Testing Expo the Pilot 4DV8. With Seica's 25+ years of experience in testing and especially in the world of automotive testing where the technology advances at a face pace, this will be an opportunity to see first-hand the latest flying prober technology on the market today.Â-  With the increasing demand to save power and...

Read More »
Company News

Seica Inc. Introduces Seica Automation to North America

Salem, NH,Â-  USA – Seica Inc. is pleased to announce the signing of an agreement for the distribution of Seica Automation equipment in North America. Seica Automation has a large portfolio of automation equipment which covers areas such as board handling and conveyance, press fit, label applicators and camera inspection, laser marking, PCB routing and cutting, and curing. Seica Automation...

Read More »

All Topics