NKK Switches

Toggle Switches are available in low and medium capacity.
Electrical Equipment & Systems

Toggle Switches are available in low and medium capacity.

With capacities from 3-25 A, electromechanical S series are available in configurations with 1-4 poles in 2 or 3 positions. Bat style toggles range from 12.0-18.0 mm in length and are brass with chrome plating. Panel sealed locking lever versions are rated to IP67 and prevent accidental actuation. Panel-mounted with 12.0 mm threaded bushings, products conform to standard panel cut outs and offer...

Read More »
Tilt Switch replaces mercury and pendulum switches.
Electrical Equipment & Systems

Tilt Switch replaces mercury and pendulum switches.

DS series combination tilt/sensor switch is through-hole, PCB mounted device that ensures reliability with use of photo interrupter contacts rather than traditional contacts. Switch measures 9 mm in height, length, and width, making it suited for high-density mounting. It is triggered when tilted beyond 30° in any direction and sealed construction protects switch from environmental elements.

Read More »
Switches come in snap-in and panel mount styles.
Electrical Equipment & Systems

Switches come in snap-in and panel mount styles.

Miniature M Series rocker and paddle switches incorporate bias guard that prevents misalignment of contacts and internal guide that prevents transmission of diagonal force on actuator from reaching contact mechanism. Rockers feature interlocking actuator blocks. Offered in 1-4 poles with multiple circuit configurations, including momentary and maintained action, electromechanical switches can be...

Read More »
Lead-Free Tactile Switches meet RoHS directive.
Electrical Equipment & Systems

Lead-Free Tactile Switches meet RoHS directive.

Series HP features 6 mm through-hole and surface-mount switches with insert-molded terminals to lock out flux, solvents, and other contaminants. Circuit is normally-open, SPST OFF, momentary ON. Measuring .244 in. square, body is molded in heat-resistant resin, which meets lead-free solder processing requirements and has UL flammability rating of 94V-0. Switches are available with silver contacts...

Read More »
Illuminated Rocker Switches feature snap-in design.

Illuminated Rocker Switches feature snap-in design.

Series MLW has stainless steel housing to prevent corrosion, stainless steel retaining clips for secure mounting over range of panel thicknesses, and interlocking actuator, which prevents switch failure due to jamming or window locking. Protective covers shield contacts from dust. Available in SPDT and DPDT, in multiple momentary and maintained circuits, miniature switches are rated 5 A at 125...

Read More »
Miniature Toggle Switches feature anti-jamming design.

Miniature Toggle Switches feature anti-jamming design.

Offered in single- and double-pole models, light-duty E-Series features high-torque bushing that prevents rotation and separation from frame during installation. By clinching frame away from terminals, 1,500 V dielectric strength between contact and case is achieved. Anti-jamming design protects contact mechanism from damage if lever is subjected to harsh treatment. Power models are rated 3 A at...

Read More »
DIP Rotary Switches feature sealed construction.
Electrical Equipment & Systems

DIP Rotary Switches feature sealed construction.

Available in through-hole and SMT configurations, ND and ND3 series ultra-miniature, 8 mm DIP rotaries feature positive action detent mechanism and bifurcated and spring-loaded contacts. Products come in screwdriver and shaft-actuated models, in real or complement codes with 10 and 16 positions. Series also includes bracketed and unbracketed switches, in upright or right angle models, as well as...

Read More »
Customizable Rotary Switches suit industrial/medical use.
Electrical Equipment & Systems

Customizable Rotary Switches suit industrial/medical use.

Constructed with nickel-plated brass shafts and phenolic resin molded cases, HS and PS Series have 30° indexing and are available in 2-11 positions. HS16 series, rated 12 A @ 125 Vac or 6 A @ 250 Vac, have 55 mm dia and can be specified with 1-6 poles in shorting or nonshorting models. Rated 30 A @ 125/250 Vac, PS series devices are nonshorting rotary switches with 76 mm dia. They are...

Read More »
Molded Rocker Switches are certified for TV ratings.
Electrical Equipment & Systems

Molded Rocker Switches are certified for TV ratings.

Constructed for dust resistance, snap-in-mounted JW series features external insulating barriers, interior PPS seal between actuator and contact area, polyamide housing and case, as well as molded-in and epoxy-sealed terminals. JWM and JWL models, certified for TV-5 and TV-8 ratings respectively, are UL, CSA, and VDE approved. Able to exceed 160 A inrush load, JWL devices are rated at 16 A @...

Read More »
Pushbuttons come in illuminated or non-illuminated types.
Electrical Equipment & Systems

Pushbuttons come in illuminated or non-illuminated types.

UL Recognized, CSA Certified LB series includes square, round, rectangular, or round-panel seal models available in SPDT or DPDT, momentary, or alternate action. Devices have snap-action contact mechanism and provide audible and tactile feedback. Illuminated versions are offered with incandescent and neon bulbs as well as LEDs in red, green, amber, white, and blue. With gold or silver contacts,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers