New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Vertilon Corporation

Computer Hardware & Peripherals

Multichannel Photon Counting System offers high-speed operation.

Able to count up to 2-billion photons/sec, PhotoniQ MCPC618 meets needs of photomultiplier tubes and silicon photomultipliers requiring precision ultra-low light level sensing at high speeds. Data acquisition product interfaces directly to high gain optical devices without external preamplifiers or other electronics. Each of its 8 independent channels is capable of resolving photon occurrences at...

Read More »
Data Acquisition Systems suit DNA sequencing applications.
Computer Hardware & Peripherals

Data Acquisition Systems suit DNA sequencing applications.

Field expandable from 2-8 inputs, PhotoniQ IQSP418 and IQSP518 target applications that require multiple photomultiplier tubes. Inputs interface directly or with minimal circuitry to PMTs, silicon photomultipliers, and avalanche photodiodes. When triggered, signal data is simultaneously acquired across all channels and transferred to PC via USB connection. Model IQSP418 has 96 dB dynamic range...

Read More »
Vertilon Introduces SIB2316 Sensor Interface Board for SensL SPMArray
Architectural & Civil Engineering Products

Vertilon Introduces SIB2316 Sensor Interface Board for SensL SPMArray

New Product Targets PET and Radiation Detection Applications WESTFORD, MA (November 5, 2008) - Vertilon Corporation (http://www.vertilon.com) announced today that it has launched the SIB2316 sensor interface board for the SensL SPMArray 16 element silicon photomultiplier (SiPM) array. The first of its kind product supports up to two SPMArrays and provides the necessary interface and signal...

Read More »
Sensor Interface Board is compatible with H7546B MAPMT.
Architectural & Civil Engineering Products

Sensor Interface Board is compatible with H7546B MAPMT.

Model SIB164 provides mechanical and electrical interface between Hamamatsu H7546B 64-anode photomultiplier tube (PMT) and 64 channel DAQ system. Charge signals from high-speed events are detected by PMT mounted on SIB164 and sent over specialized cables to DAQ system. When used with IQSP582 PhotoniQ system, SIB164 achieves single photon sensitivity at rates exceeding 200,000 events/sec. Board...

Read More »
DAQ System interfaces to multi-element optical sensors.
Computer Hardware & Peripherals

DAQ System interfaces to multi-element optical sensors.

Compatible with Hamamatsu H7546B and H8500D multianode photomultiplier tubes, PhotoniQ IQSP582 suits medical imaging and particle detection applications such as PET and SPECT. It operates at trigger rates up to 250 kHz and has input dynamic range of 84 dB. Using one of several user-selectable trigger modes, event data from input sensor is acquired simultaneously across all 64 channels by unit...

Read More »
Interface Board links PMT sensors to DAQ systems.
Architectural & Civil Engineering Products

Interface Board links PMT sensors to DAQ systems.

Board model SIB064 provides mechanical interface and electrical connectivity between Hamamatsu H8500D, a 64-element multianode photomultiplier tube, and multichannel DAQ system. High bandwidth preamplier connects directly to H8500D last dynode and provides its amplified output to one of 3 on-board pulse discriminators - leading edge, constant fraction, zero slope - to directly trigger DAQ...

Read More »
Computer Hardware & Peripherals

DAQ System achieves 1 MHz trigger rates on all inputs.

Optimized for very high-speed confocal microscopy and fluorescence detection applications, PhotoniQ IQSP580 interfaces to multi-anode photomultiplier tubes, avalanche photodiode arrays, and other types of multi-element optical sensors through sensor interface board. With dynamic range of 84 dB and single photon sensitivity, IQSP580 simultaneously acquires charge signals across all 32 input...

Read More »
Computer Hardware & Peripherals

DAQ System has 96 dB range and single photon sensitivity.

Model SDS232 multi-channel distribution system allows up to 32 individual photomultiplier tubes and photodiodes to be directly connected to PhotoniQ charge acquisition system. Compatible with IQSP480, it can acquire and transfer data at event rates exceeding 50,000/sec. Unit is suited for applications including bioaerosol detection and flow cytometry where multiple PMT and photodiode sensors are...

Read More »
Computer Hardware & Peripherals

Multichannel Photon Counting System offers high-speed operation.

Able to count up to 2-billion photons/sec, PhotoniQ MCPC618 meets needs of photomultiplier tubes and silicon photomultipliers requiring precision ultra-low light level sensing at high speeds. Data acquisition product interfaces directly to high gain optical devices without external preamplifiers or other electronics. Each of its 8 independent channels is capable of resolving photon occurrences at...

Read More »
Data Acquisition Systems suit DNA sequencing applications.
Computer Hardware & Peripherals

Data Acquisition Systems suit DNA sequencing applications.

Field expandable from 2-8 inputs, PhotoniQ IQSP418 and IQSP518 target applications that require multiple photomultiplier tubes. Inputs interface directly or with minimal circuitry to PMTs, silicon photomultipliers, and avalanche photodiodes. When triggered, signal data is simultaneously acquired across all channels and transferred to PC via USB connection. Model IQSP418 has 96 dB dynamic range...

Read More »
Vertilon Introduces SIB2316 Sensor Interface Board for SensL SPMArray
Architectural & Civil Engineering Products

Vertilon Introduces SIB2316 Sensor Interface Board for SensL SPMArray

New Product Targets PET and Radiation Detection Applications WESTFORD, MA (November 5, 2008) - Vertilon Corporation (http://www.vertilon.com) announced today that it has launched the SIB2316 sensor interface board for the SensL SPMArray 16 element silicon photomultiplier (SiPM) array. The first of its kind product supports up to two SPMArrays and provides the necessary interface and signal...

Read More »
Sensor Interface Board is compatible with H7546B MAPMT.
Architectural & Civil Engineering Products

Sensor Interface Board is compatible with H7546B MAPMT.

Model SIB164 provides mechanical and electrical interface between Hamamatsu H7546B 64-anode photomultiplier tube (PMT) and 64 channel DAQ system. Charge signals from high-speed events are detected by PMT mounted on SIB164 and sent over specialized cables to DAQ system. When used with IQSP582 PhotoniQ system, SIB164 achieves single photon sensitivity at rates exceeding 200,000 events/sec. Board...

Read More »
DAQ System interfaces to multi-element optical sensors.
Computer Hardware & Peripherals

DAQ System interfaces to multi-element optical sensors.

Compatible with Hamamatsu H7546B and H8500D multianode photomultiplier tubes, PhotoniQ IQSP582 suits medical imaging and particle detection applications such as PET and SPECT. It operates at trigger rates up to 250 kHz and has input dynamic range of 84 dB. Using one of several user-selectable trigger modes, event data from input sensor is acquired simultaneously across all 64 channels by unit...

Read More »
Interface Board links PMT sensors to DAQ systems.
Architectural & Civil Engineering Products

Interface Board links PMT sensors to DAQ systems.

Board model SIB064 provides mechanical interface and electrical connectivity between Hamamatsu H8500D, a 64-element multianode photomultiplier tube, and multichannel DAQ system. High bandwidth preamplier connects directly to H8500D last dynode and provides its amplified output to one of 3 on-board pulse discriminators - leading edge, constant fraction, zero slope - to directly trigger DAQ...

Read More »
Computer Hardware & Peripherals

DAQ System achieves 1 MHz trigger rates on all inputs.

Optimized for very high-speed confocal microscopy and fluorescence detection applications, PhotoniQ IQSP580 interfaces to multi-anode photomultiplier tubes, avalanche photodiode arrays, and other types of multi-element optical sensors through sensor interface board. With dynamic range of 84 dB and single photon sensitivity, IQSP580 simultaneously acquires charge signals across all 32 input...

Read More »
Computer Hardware & Peripherals

DAQ System has 96 dB range and single photon sensitivity.

Model SDS232 multi-channel distribution system allows up to 32 individual photomultiplier tubes and photodiodes to be directly connected to PhotoniQ charge acquisition system. Compatible with IQSP480, it can acquire and transfer data at event rates exceeding 50,000/sec. Unit is suited for applications including bioaerosol detection and flow cytometry where multiple PMT and photodiode sensors are...

Read More »

All Topics