TechComm

Software

(RDF) Equipment Now Fully Compatible with COMINT Consulting's Krypto500 Decoding Software Suite

Fort Lauderdale, Florida – Krypto500 can now be used with Tech Comm's TCR-1000 series MF/HF receivers, which are Software-Defined Radios (SDR) designed for all-mode coverage of the MF/HF spectrum. The TCR-1001 offers coverage from 200 KHz to 30 MHz with a color touch screen, 200 memory channels and DSP noise reduction. The TCR-1002 covers 500 KHz to 30 MHz. Tech Comm receivers are used by...

Read More »
Direction Finder Processor features dual receiver design.
Computer Hardware & Peripherals

Direction Finder Processor features dual receiver design.

Intended for mobile operation where covert location of surveillance equipment is required, TC-7228 can be controlled remotely or locally using TC-3518 Remote Operating Unit. Single package includes DF processor,Â- miniature Windows 7 PC, and 2 receivers. Dual-receiver design lets user continuously monitor one frequency in DF mode while using second receiver for acquisition or band scope use....

Read More »
Adhesives & Sealants

HF/VHF/UHF Receiver provides continuous coverage.

Based onÂ- modern SDR architecture, TCR-1003 offers 200 KHz to 1,500 MHz continuous coverage from 3U, 19 in. form factor. Standard features incldue AM/FM/SSB/CW modes; serial, USB, and Ethernet ports that facilitate remote or automatic operation; and intuitive interface with 5.6 in. color touchscreen, rotary encoder, and numeric keypad. This HF/VHF/UHF receiver also...

Read More »
Communication Systems & Equipment

TechComm Announces 500kHz - 30MHz HF Receiver

Fort Lauderdale, FL - TechComm, Inc is now shipping the TCR-1002 HF Receiver. This new design is a SDR - direct digital conversion architecture. The TCR-1002 has an intuitive interface with a color touch screen, rotary encoder and numeric key pad. Using the RX340 serial interface the TCR-1002 is compatible with the following Signal Intelligence products; Spectrum SentryNet and Sprectrum...

Read More »
Chemicals & Gases

TechComm Announces: Moving Map Module for Radio Direction Finder (RDF)

Sunrise, FL - TechComm introduces a Moving Map Module which runs on a PC PLATFORM and allows for display of DF LINE OF BEARING (LOB) on a map. Your position on the map is continously updated. Module includes GPS and Magnetic Compass. The MOVING MAP MODULE can be used with any of the TechComm family of DF processors. Tech Comm, Inc. of Sunrise, Florida, designs and manufactures airborne, seaborne...

Read More »
Computer Hardware & Peripherals

Direction Finder Processor features dual radio design.

With entry by frequency or marine channel, Model TC-7200 provides simultaneous direction finding on 2 frequencies and includes continuous coverage from 200 kHz to 30 MHz, 118-174 MHz, and 220-440 MHz. Unit features 406 EPIRB and HF/VHF DF dual internal radios, color touchscreen display, and variable bearing integration speed, as well as RS-232, USB, and Ethernet control. Frequency range is...

Read More »
Software

(RDF) Equipment Now Fully Compatible with COMINT Consulting's Krypto500 Decoding Software Suite

Fort Lauderdale, Florida – Krypto500 can now be used with Tech Comm's TCR-1000 series MF/HF receivers, which are Software-Defined Radios (SDR) designed for all-mode coverage of the MF/HF spectrum. The TCR-1001 offers coverage from 200 KHz to 30 MHz with a color touch screen, 200 memory channels and DSP noise reduction. The TCR-1002 covers 500 KHz to 30 MHz. Tech Comm receivers are used by...

Read More »
Direction Finder Processor features dual receiver design.
Computer Hardware & Peripherals

Direction Finder Processor features dual receiver design.

Intended for mobile operation where covert location of surveillance equipment is required, TC-7228 can be controlled remotely or locally using TC-3518 Remote Operating Unit. Single package includes DF processor,Â- miniature Windows 7 PC, and 2 receivers. Dual-receiver design lets user continuously monitor one frequency in DF mode while using second receiver for acquisition or band scope use....

Read More »
Adhesives & Sealants

HF/VHF/UHF Receiver provides continuous coverage.

Based onÂ- modern SDR architecture, TCR-1003 offers 200 KHz to 1,500 MHz continuous coverage from 3U, 19 in. form factor. Standard features incldue AM/FM/SSB/CW modes; serial, USB, and Ethernet ports that facilitate remote or automatic operation; and intuitive interface with 5.6 in. color touchscreen, rotary encoder, and numeric keypad. This HF/VHF/UHF receiver also...

Read More »
Communication Systems & Equipment

TechComm Announces 500kHz - 30MHz HF Receiver

Fort Lauderdale, FL - TechComm, Inc is now shipping the TCR-1002 HF Receiver. This new design is a SDR - direct digital conversion architecture. The TCR-1002 has an intuitive interface with a color touch screen, rotary encoder and numeric key pad. Using the RX340 serial interface the TCR-1002 is compatible with the following Signal Intelligence products; Spectrum SentryNet and Sprectrum...

Read More »
Company News

TechComm Relocates to Expand Line of Radio Direction Finders!!!

TechComm Inc has relocated to a brand new location in Fort Lauderdale,FL. We are now closer to the Fort Lauderdale International Airport and to Port Everglades. Our new facility will allow us to accommodate our expanded product line including Radio Direction Finders and Radios to be introduced in the near future. Our new information is as follows: TECH COMM INC. 511 SE 32nd Court Fort Lauderdale,...

Read More »
Chemicals & Gases

TechComm Announces: Moving Map Module for Radio Direction Finder (RDF)

Sunrise, FL - TechComm introduces a Moving Map Module which runs on a PC PLATFORM and allows for display of DF LINE OF BEARING (LOB) on a map. Your position on the map is continously updated. Module includes GPS and Magnetic Compass. The MOVING MAP MODULE can be used with any of the TechComm family of DF processors. Tech Comm, Inc. of Sunrise, Florida, designs and manufactures airborne, seaborne...

Read More »
Computer Hardware & Peripherals

Direction Finder Processor features dual radio design.

With entry by frequency or marine channel, Model TC-7200 provides simultaneous direction finding on 2 frequencies and includes continuous coverage from 200 kHz to 30 MHz, 118-174 MHz, and 220-440 MHz. Unit features 406 EPIRB and HF/VHF DF dual internal radios, color touchscreen display, and variable bearing integration speed, as well as RS-232, USB, and Ethernet control. Frequency range is...

Read More »

All Topics