S2C, Inc.
San Jose, CA 95110
Share:
New S10 10M Prodigy Logic Systems Available in Single, Dual and Quad FPGA Configurations
Stratix 10 GX 10M FPGA features up to 10.2 million logic elements. Supports up to 1.4 Gbps for general-purpose I/O and up to 17.4 Gbps for the high-speed transceivers. Increases current SoC/ASIC design prototyping capacity, simplify the prototyping process and achieve a low cost per gate.
Read More »FPGA Prototyping Becomes Even More Precise with Latest Additions to S2C's World-Class Prodigy(TM) Prototype Ready(TM) Interface Library
8 New Modules Give Designers Ability to Focus Development to Achieve Greater Product Differentiation and Faster Time-to-Market SAN JOSE, Calif. - S2C Inc., a worldwide leader of FPGA-based prototyping solutions for today's innovative designs, announced today the addition of 8 new Prototype Ready interface cards and accessories to its extensive library of over 90 pre-engineered hardware and...
Read More »Prototyping Board supports Xilinx Virtex UltraScale (VU) 440 FPGA.
Used for prototyping large IPs or mid-size SoCs, Dual VU440 Prodigy Logic Module- scales to handle designs up to 88M gates and 177.2 Mb of internal memory. This 280 x 250 mm board offers 518 direct interconnections and 12 GTH transceivers between 2 FPGAs- to facilitate design partitioning without cables or interconnection boards. Features include 1,200 GPIOs and 64 GTH transceivers on 12...
Read More »Prototyping Board supports Xilinx Virtex® UltraScale 440 FPGA.
Single VU440 Prodigy™ Logic Module (LM)- provides all-purpose FPGA prototyping system with 260 x 170 mm form factor.- Along with DDR4 and PCIe3 support, features include 8 all-purpose Prodigy connectors for various system interfaces and 2 GT connectors for high-speed serial connectivity. Scalability allows use as standalone unit or in Cloud Cube enterprise modes, while sixth generation remote...
Read More »S2C Leads FPGA Prototyping with Support for Xilinx Next Generation Virtex® UltraScale 440 FPGA
SAN JOSE, Calif. –- S2C Inc., a leading provider of FPGA-base rapid prototyping solutions, today announced plans to deliver its family of prototyping boards that support the latest in Xilinx's Virtex UltraScale 440 FPGA. S2C Virtex UltraScale Logic Modules will boast double the capacity, higher performance, and increased flexibility and expandability over previous versions. Design teams can...
Read More »Logic Modules foster rapid SoC and ASIC prototyping.
Providing up to 4.1 million ASIC gates of capacity, 432 external I/O, and 16 channels of Gigabit Transceivers capable of running up to 10 Gbps, K7 TAI Logic Module allows project managers to deploy large number of FPGA-based prototypes for diverse tasks. Module is based on Xilinx 28 nm Kintex-7 FPGA devices and comes with TAI Player Pro runtime software. Hardware design, system verification, and...
Read More »
S2C Boasts Largest Prototype Ready(TM) Interfaces Library for Virtex-7 2000T FPGA Based Rapid ASIC Prototyping
Added 13 New Modules including a new High-Speed GTX Peripheral Category San Jose, CA - S2C Inc., a leading rapid SoC prototyping solutions provider, announced today the addition of 13 new Prototype Ready interface cards and accessories to its growing library of pre-engineered hardware and software components aimed at accelerating the development of SoC prototypes. These new modules enable users...
Read More »
Logic Module supports SoC/ASIC prototyping.
Using 4 Xilinx Virtex-®-7 2000T All Programmable 3D ICs, Quad V7 TAI Logic Module- allows designers to deploy multiple SoC/ASIC prototypes for hardware verification and early software development. Module supports 80+ pairs length-matched LVDS bus between any 2 FPGAs optimized for LVDS pin-multiplexing and 10,000+ design interconnections between any 2 FPGAs with LVDS bus running at 800 MHz+....
Read More »TAKUMI Graphics IP Cores Reference Designs Available on S2C Prototyping Platform
Prototype-Ready IP jump starts complex SoC Integration with 3D Graphics San Jose, CA - S2C announces that TAKUMI Corporation, a Japan-based advanced Graphics Intellectual Properties (IP) provider, has implemented a series of Graphics IP cores on S2C's rapid FPGA-based prototyping systems including GS3000 and GSV3000 cores. These TAKUMI IP cores have been fully validated in FPGAs and can be easily...
Read More »
Test Chip Modules can create FPGA-based prototypes.
ARM1176 and ARM926 GUC test chip modules are used to create FPGA-based prototypes and to interface FPGA-based prototype boards to user's target operating environment. ARM test chip modules can be used with S2C SoC/ASIC prototyping hardware including Virtex-7 TAI Logic Modules, Stratix-4 TAI Logic Modules, Stratix-4 TAI Verification modules, Virtex-6 TAI Logic Modules, and Virtex-6 TAI...
Read More »New S10 10M Prodigy Logic Systems Available in Single, Dual and Quad FPGA Configurations
Stratix 10 GX 10M FPGA features up to 10.2 million logic elements. Supports up to 1.4 Gbps for general-purpose I/O and up to 17.4 Gbps for the high-speed transceivers. Increases current SoC/ASIC design prototyping capacity, simplify the prototyping process and achieve a low cost per gate.
Read More »FPGA Prototyping Becomes Even More Precise with Latest Additions to S2C's World-Class Prodigy(TM) Prototype Ready(TM) Interface Library
8 New Modules Give Designers Ability to Focus Development to Achieve Greater Product Differentiation and Faster Time-to-Market SAN JOSE, Calif. - S2C Inc., a worldwide leader of FPGA-based prototyping solutions for today's innovative designs, announced today the addition of 8 new Prototype Ready interface cards and accessories to its extensive library of over 90 pre-engineered hardware and...
Read More »Prototyping Board supports Xilinx Virtex UltraScale (VU) 440 FPGA.
Used for prototyping large IPs or mid-size SoCs, Dual VU440 Prodigy Logic Module- scales to handle designs up to 88M gates and 177.2 Mb of internal memory. This 280 x 250 mm board offers 518 direct interconnections and 12 GTH transceivers between 2 FPGAs- to facilitate design partitioning without cables or interconnection boards. Features include 1,200 GPIOs and 64 GTH transceivers on 12...
Read More »Prototyping Board supports Xilinx Virtex® UltraScale 440 FPGA.
Single VU440 Prodigy™ Logic Module (LM)- provides all-purpose FPGA prototyping system with 260 x 170 mm form factor.- Along with DDR4 and PCIe3 support, features include 8 all-purpose Prodigy connectors for various system interfaces and 2 GT connectors for high-speed serial connectivity. Scalability allows use as standalone unit or in Cloud Cube enterprise modes, while sixth generation remote...
Read More »S2C Leads FPGA Prototyping with Support for Xilinx Next Generation Virtex® UltraScale 440 FPGA
SAN JOSE, Calif. –- S2C Inc., a leading provider of FPGA-base rapid prototyping solutions, today announced plans to deliver its family of prototyping boards that support the latest in Xilinx's Virtex UltraScale 440 FPGA. S2C Virtex UltraScale Logic Modules will boast double the capacity, higher performance, and increased flexibility and expandability over previous versions. Design teams can...
Read More »Logic Modules foster rapid SoC and ASIC prototyping.
Providing up to 4.1 million ASIC gates of capacity, 432 external I/O, and 16 channels of Gigabit Transceivers capable of running up to 10 Gbps, K7 TAI Logic Module allows project managers to deploy large number of FPGA-based prototypes for diverse tasks. Module is based on Xilinx 28 nm Kintex-7 FPGA devices and comes with TAI Player Pro runtime software. Hardware design, system verification, and...
Read More »
S2C Boasts Largest Prototype Ready(TM) Interfaces Library for Virtex-7 2000T FPGA Based Rapid ASIC Prototyping
Added 13 New Modules including a new High-Speed GTX Peripheral Category San Jose, CA - S2C Inc., a leading rapid SoC prototyping solutions provider, announced today the addition of 13 new Prototype Ready interface cards and accessories to its growing library of pre-engineered hardware and software components aimed at accelerating the development of SoC prototypes. These new modules enable users...
Read More »
Logic Module supports SoC/ASIC prototyping.
Using 4 Xilinx Virtex-®-7 2000T All Programmable 3D ICs, Quad V7 TAI Logic Module- allows designers to deploy multiple SoC/ASIC prototypes for hardware verification and early software development. Module supports 80+ pairs length-matched LVDS bus between any 2 FPGAs optimized for LVDS pin-multiplexing and 10,000+ design interconnections between any 2 FPGAs with LVDS bus running at 800 MHz+....
Read More »TAKUMI Graphics IP Cores Reference Designs Available on S2C Prototyping Platform
Prototype-Ready IP jump starts complex SoC Integration with 3D Graphics San Jose, CA - S2C announces that TAKUMI Corporation, a Japan-based advanced Graphics Intellectual Properties (IP) provider, has implemented a series of Graphics IP cores on S2C's rapid FPGA-based prototyping systems including GS3000 and GSV3000 cores. These TAKUMI IP cores have been fully validated in FPGAs and can be easily...
Read More »
Test Chip Modules can create FPGA-based prototypes.
ARM1176 and ARM926 GUC test chip modules are used to create FPGA-based prototypes and to interface FPGA-based prototype boards to user's target operating environment. ARM test chip modules can be used with S2C SoC/ASIC prototyping hardware including Virtex-7 TAI Logic Modules, Stratix-4 TAI Logic Modules, Stratix-4 TAI Verification modules, Virtex-6 TAI Logic Modules, and Virtex-6 TAI...
Read More »