ROHM Semiconductor USA, LLC

UDZLV and KDZLV Series Zener Diodes are AEC-Q101 compliant.
Electronic Components & Devices

UDZLV and KDZLV Series Zener Diodes are AEC-Q101 compliant.

Comprising 12 models in Zener voltage range of 51V to 150V, UDZLV and KDZLV Series Zener Diodes feature rated power of 0.2W and 1.0W respectively. With compact 2.5mm x 1.2mm sized package, UDZLV is suitable for consumer electronics and automotive ECUs, MFPs, and inkjet printers. Available in 3.5mm x 1.6mm form factor, KDZLV is suitable for automotive and industrial applications. Series utilizes...

Read More »
Sensors, Monitors & Transducers

Six-Axis Combo Accelerometer-Gyro Sensors feature ULP design.

Respectively supplied in 3 x 3 x 0.9 mm, 16-pin LGA and 2.5x 3 x 0.9 mm, 14-pin LGA packages, KXG07 and KXG08 are 6-axis combo accelerometer-gyro sensors. Phase detection scheme enables full, high-speed operation of onboard accelerometer, gyroscope, and temperature sensor while consuming down to 0.2 mA. This allows always-on operation in- motion sensing applications, including wearable devices...

Read More »
Thin Compact LEDs are available in 15 colors.
Electronic Components & Devices

Thin Compact LEDs are available in 15 colors.

Optimized for wearable tech, portable devices, and drones, PICOLED™ SML-P1 series comes in 1.0 x 0.6 mm package with 0.2 mm form factor made possible via combination of- low gold wire loop- and- thin light emitting element. This low-profile, thin- chip LED series, weighing 0.2 mg, also leverages element technology that eliminates wavelength variations. Furthermore, penetration...

Read More »
Multi-Sensor Board aids sensor design/verification.
Sensors, Monitors & Transducers

Multi-Sensor Board aids sensor design/verification.

SENSORSHLD1-EVK-101 integrates 10 sensors: analog temperature, digital barometric pressure, Hall switch, magnetometer, digital accelerometer, digital magnetometer and accelerometer, digital gyroscope and accelerometer, analog UV, digital ambient light and proximity, and digital color. Also featured, Arduino interface pins- ensure compatibility with existing open-source prototyping platforms...

Read More »
Low Power PMIC supports rechargeable battery applications.
Electrical Equipment & Systems

Low Power PMIC supports rechargeable battery applications.

Supplied in 4 x 4 x 0.62 mm WL-CSP, Model BD71815GW integrates 5 low-Iq buck regulators, 7 LDOs, JEITA-compliant 1S charger, fuel gauge with Coulomb Counter, LED driver, RTC, and extensive monitoring and protection circuits, helping users realize power efficiency of NXP’s i.MX 7D/S processors by supporting all possible power modes. Switching regulators deliver 82–92% efficiency across load...

Read More »
Communication Systems & Equipment

Wireless Communication Module is Bluetooth SMART compatible.

Featuring Bluetooth-® SIG certification,- MK71050-03 integrates LAPIS Semiconductor's ML7105 wireless communication IC with- 16 kB EEPROM, 26 MHz XO for master clock, and pattern antenna. Connection with host MCU is made via SPI, while commands and data format unique to LAPIS Semiconductor are implemented using- 3 dedicated terminals: IRQ pin, WAKEUP pin, RF Active pin. Design has FCC...

Read More »
Electrical Equipment & Systems

Low-Power Optimized PMICs support Skylake core processor.

Respectively available in- 4.26 x 4.26 x 0.62 mm and 5.90 x 5.90 x 0.62 mm packages with 0.4 mm pitch, BD99991GW and BD99992GW enable fanless designs of such space-conscious mobile PC products as Ultrabooks™, 2-in-1 detachables, and tablets built around Intel-® 14 nm Skylake CPU.- BD99991GW supports core power rails required by the Skylake platform and Intel IMVP8 power management interface,...

Read More »
ROHM's New 1608-Sized High Brightness Single Rank Chip LEDs
Electronic Components & Devices

ROHM's New 1608-Sized High Brightness Single Rank Chip LEDs

75% less brightness variation vs. conventional products contribute to improved performance and reduced design load KYOTO, Japan and SANTA CLARA, Calif.,- – ROHM has recently announced the availability of high accuracy single-rank 1608-size high-brightness chip LEDs optimized for a wide variety of applications, from industrial equipment and consumer devices to automotive systems. The need to...

Read More »
SiC Power Module supports high-power applications.
Controls & Controllers

SiC Power Module supports high-power applications.

Integrating SiC SBD and SiC-MOSFET into single package, 1,200 V/300 A Model BSM300D12P2E001 is designed for inverters and converters in solar power conditioners and industrial equipment. Device features optimized chip layout and module construction that minimizes internal inductance, suppressing surge voltage while supporting operation up to 300 A. Switching loss is 77% lower than conventional...

Read More »
The World's First Qi-Certified Medium Power Transmitter Reference Design --Cutting-edge Reference Design will Allow ROHM to Expand into the Wireless Charging Segment
Electrical Equipment & Systems

The World's First Qi-Certified Medium Power Transmitter Reference Design --Cutting-edge Reference Design will Allow ROHM to Expand into the Wireless Charging Segment

Cutting-edge reference design will allow ROHM to expand into the wireless charging segment ROHM has received certification from WPC (Wireless Power Consortium) for its reference design using the BD57020MWV wireless power transmitter IC. This is the first device in the world certified to be compliant with the new Qi medium power specification. WPC's Qi standard for medium power has attracted...

Read More »

All Topics