Laser Research Optics
Providence, RI 02904
CO2 Lenses And Mirrors meet OEM specifications as replacements for coherent lasers.
Laser Research Optics’ CO2 Lenses and Mirrors are OEM quality are optimized for 10.6 microns. The CO2 lenses are offered in .5 in. to 2.5 in. dimeter sizes with focal lengths from 3 in. to 10 in. The mirrors are made of silicon and come in 50 mm to 60 mm sizes with a thickness range from 0.025 in. to 0.38 in. They are offered with single or dual-band coatings and have a better than 99.5...
Read More »
Medical CO2 Laser Optics feature 40-20 scratch-dig surface finishes.
Medical CO2 Laser Optics are available in ZnSe plano-convex and plane-parallel discs, output couplers and mirrors. Units come in ½ in. and ¾ in. O.D. sizes and come with dual-band and reflectance coatings. Products offer surface accuracy of 10.6 microns and meet MIL-O-13830 standards.
Read More »
Mounted CO2 Laser Replacement Lenses meet ISO-10110 standards.
Mounted CO2 Laser Replacement Lenses are offered with focal lengths ranging from 1 in. to 10 in. at ½ in. increments. Lenses come with coatings for matching specific phase and polarization requirements. Suitable for engraving and marking lenses, ½ in. and 1 in. O.D lenses provide less than 0.2% total absorption value.
Read More »
Optical Cleaning Kit consists of reagent-grade isopropyl alcohol.
Optical Cleaning Kit consists of 24 cotton balls, 24 lens matts, 24 surgical-grade finger cots, distilled water, polishing compound and an air bulb to remove dust. Unit is suitable for cleaning lens. Ideal for private labeling to manufacturers and distributors of lasers and cameras, product is designed to remove splatter and blow-back in CO₂ lasers.
Read More »
CO2 Laser Optics for Cutting and Etching Thin Metals
A line of CO2 laser optics optimized for cutting and etching thin metals when fabricating filters, strainers, and related applications is available from Laser Research Optics of Providence, Rhode Island. Laser Research CO2 Optics include lenses that feature coatings with < 0.2% total absorption values to keep them cooler and silicon turning mirrors which have an enhanced DMBR coating to provide...
Read More »
Zinc Sulfide Optics are hard and scratch resistant.
Used in military applications, Zinc Sulfide Optics feature 150-165 kg/mm^2 Knoop hardness. Available in 0.5 in. to 3 in. O.D. or diagonal sizes with ±0.002 in. thickness, units are made using hot isostatic pressing. Offering 0.45 to 12 microns wavelength spectrum, optics meet MIL-PRF-13830 standards. Product comes with 10-5 scratch dig finishing, 69 MPa rupture modulus and λ/4 and λ/10...
Read More »
CO2 Laser Lenses Optimized for Steel Cutting
A full line of ZnSe (zinc selenide) focusing lenses that are optimized for use with steel cutting lasers up to 4 kW and suitable field replacements by users is available from Laser Research Optics of Providence, Rhode Island. Laser Research Optics CO2 Laser Lenses come in plano-convex and -meniscus configurations in 1” to 2” O.D. sizes with thicknesses ranging from 0.250” to 0.380”. They...
Read More »
CO2 Lenses and Mirrors Optimized for Wood Engraving Lasers
A line of field-replacement CO2 optics that feature lenses in a wide range of focal lengths for low power lasers where depth-of-field is critical is available from Laser Research Optics of Providence, Rhode Island. Laser Research Optics CO2 Laser Lenses and Mirrors meet OEM and ISO-10110 specifications and are optimized for 10.6 µm wood cutting and engraving laser systems where depth-of-field is...
Read More »
CO2 Laser Optics for Cutting Composites Cleanly
A line of field-replacement CO2 optics for lasers that cut composites for making precision gaskets where smooth edge definition is required is available from Laser Research Optics of Providence, Rhode Island. Laser Research CO2 Laser Optics include ZnSe lenses and mirrors which are direct field replacements for popular lasers used in manufacturing gaskets from composite materials that require...
Read More »
Sapphire Fiber Laser Windows feature Moh 9 hardness.
Suitable as debris shields on 1064 nm cutting lasers, Sapphire Fiber Laser Windows permit less frequent cover glass lens changes. Products have A/R coatings on both sides to provide transmission of >99.5% at 1.06 microns, with >90% at 650-670 nm. Available in -½–2 in. sizes, windows feature 10-5 scratch-dig finish and provide 1/4 wave transmitted wavefront. Windows are inherently more durable...
Read More »
CO2 Lenses And Mirrors meet OEM specifications as replacements for coherent lasers.
Laser Research Optics’ CO2 Lenses and Mirrors are OEM quality are optimized for 10.6 microns. The CO2 lenses are offered in .5 in. to 2.5 in. dimeter sizes with focal lengths from 3 in. to 10 in. The mirrors are made of silicon and come in 50 mm to 60 mm sizes with a thickness range from 0.025 in. to 0.38 in. They are offered with single or dual-band coatings and have a better than 99.5...
Read More »
Medical CO2 Laser Optics feature 40-20 scratch-dig surface finishes.
Medical CO2 Laser Optics are available in ZnSe plano-convex and plane-parallel discs, output couplers and mirrors. Units come in ½ in. and ¾ in. O.D. sizes and come with dual-band and reflectance coatings. Products offer surface accuracy of 10.6 microns and meet MIL-O-13830 standards.
Read More »
Mounted CO2 Laser Replacement Lenses meet ISO-10110 standards.
Mounted CO2 Laser Replacement Lenses are offered with focal lengths ranging from 1 in. to 10 in. at ½ in. increments. Lenses come with coatings for matching specific phase and polarization requirements. Suitable for engraving and marking lenses, ½ in. and 1 in. O.D lenses provide less than 0.2% total absorption value.
Read More »
Optical Cleaning Kit consists of reagent-grade isopropyl alcohol.
Optical Cleaning Kit consists of 24 cotton balls, 24 lens matts, 24 surgical-grade finger cots, distilled water, polishing compound and an air bulb to remove dust. Unit is suitable for cleaning lens. Ideal for private labeling to manufacturers and distributors of lasers and cameras, product is designed to remove splatter and blow-back in CO₂ lasers.
Read More »
CO2 Laser Optics for Cutting and Etching Thin Metals
A line of CO2 laser optics optimized for cutting and etching thin metals when fabricating filters, strainers, and related applications is available from Laser Research Optics of Providence, Rhode Island. Laser Research CO2 Optics include lenses that feature coatings with < 0.2% total absorption values to keep them cooler and silicon turning mirrors which have an enhanced DMBR coating to provide...
Read More »
Zinc Sulfide Optics are hard and scratch resistant.
Used in military applications, Zinc Sulfide Optics feature 150-165 kg/mm^2 Knoop hardness. Available in 0.5 in. to 3 in. O.D. or diagonal sizes with ±0.002 in. thickness, units are made using hot isostatic pressing. Offering 0.45 to 12 microns wavelength spectrum, optics meet MIL-PRF-13830 standards. Product comes with 10-5 scratch dig finishing, 69 MPa rupture modulus and λ/4 and λ/10...
Read More »
CO2 Laser Lenses Optimized for Steel Cutting
A full line of ZnSe (zinc selenide) focusing lenses that are optimized for use with steel cutting lasers up to 4 kW and suitable field replacements by users is available from Laser Research Optics of Providence, Rhode Island. Laser Research Optics CO2 Laser Lenses come in plano-convex and -meniscus configurations in 1” to 2” O.D. sizes with thicknesses ranging from 0.250” to 0.380”. They...
Read More »
CO2 Lenses and Mirrors Optimized for Wood Engraving Lasers
A line of field-replacement CO2 optics that feature lenses in a wide range of focal lengths for low power lasers where depth-of-field is critical is available from Laser Research Optics of Providence, Rhode Island. Laser Research Optics CO2 Laser Lenses and Mirrors meet OEM and ISO-10110 specifications and are optimized for 10.6 µm wood cutting and engraving laser systems where depth-of-field is...
Read More »
CO2 Laser Optics for Cutting Composites Cleanly
A line of field-replacement CO2 optics for lasers that cut composites for making precision gaskets where smooth edge definition is required is available from Laser Research Optics of Providence, Rhode Island. Laser Research CO2 Laser Optics include ZnSe lenses and mirrors which are direct field replacements for popular lasers used in manufacturing gaskets from composite materials that require...
Read More »
Sapphire Fiber Laser Windows feature Moh 9 hardness.
Suitable as debris shields on 1064 nm cutting lasers, Sapphire Fiber Laser Windows permit less frequent cover glass lens changes. Products have A/R coatings on both sides to provide transmission of >99.5% at 1.06 microns, with >90% at 650-670 nm. Available in -½–2 in. sizes, windows feature 10-5 scratch-dig finish and provide 1/4 wave transmitted wavefront. Windows are inherently more durable...
Read More »